SPECIAL REPAIR TO ROOF AND WINDOW IN BLDG NO T-12 AND T-13 OF 55 COY ASC SUP TYPE D UNDER AGE BR-I C IN GE CENTRE KIRKEE

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm complete all as specified and as directed.

Taking down chowkat or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutter(without taking of shutters from the frame) complete all as specified and as directed.

S & F Steel window (Factory made) single rebate, with side hung shutter incl hinges, steel handle and peg stay complete with glaze/gauge bars devotailed or welded complete all as specified and as directed.

S&F Plain glass 3 mm thick, ordinary quality & glazing in sqares n. exc 0.5 sqm in each pane as required & directed by Engr-in-Charge complete all as specified and as directed.

Supply and fixing 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, ventilator with single rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B1 (using 20mm graded stone aggragetes) to fill the frame & making good complete all as specified & directed.

S & F 100mm long stainless steel medium weight but hinges for PVC/wooden door shutters and frames fixed with bright screwes complete all as specified & directed.

S&F 300mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the EIC complete all as specified & directed.

S & F aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified & directed.

S&F 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by EIC.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by the EIC.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling old corrugated or semi corrugated sheets complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling old plain sheets as in ridge etc. complete all as specified and directed.

S&F 1.00mm thick plain, glavanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade zinc coating 120 including dismantling old plain AC sheet complete all as specified and directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

S & F rolled MS section as in roof trusses (framed), trussed, purlins, verticle members of sheds, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed with angle cleats or other connecting plates confirming to Fe 410-W quality B complete all as specified and directed.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long and dia of neck is 5 to 10mm complete all as specified and directed.

S & F mild steel bolts purpose made with hexagonal or square head at one end and screwed the other end or screwed end to be fitted with washers and one hexagonal or square but dia of shank exceeding 20mm and not exceeding 25mm, length of bolt exceeding 30cm long, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM (1:6) and incliding dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.

M & L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings of any description and in any position and removing debris out side MD land complete all as specified and directed.

M & L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection in alternate bays finished even and smooth without using extra cement including use of necessary formwork complete all as specified and directed.

Demolition of brick work built in cement mortar etc., complete all as specified and as directed.

M&L for brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 complete all as specified and directed.

M & L for providing PCC 1:2:4 type B1 using 20mm graded stone aggregate as in cills, steps, seismic & other similar bands, plinth course, string course, lacing course, parapets & railing up to 60cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles & throating complete all as specified and directed.

M&L for racking out joints/pointing to random rubble or polygonal rubble uncorsed or brought up to courses masonry built in cement or lime mortar, complete all as specified.

M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc and removing debris out side MD land complete all as specified and as directed by the Engineer-in-Charge.

M & L for rendering 15mm thick in CM 1:6 on brick surface finished even and smooth without using extra cement with sagol finish complete and all as specified.

Material and labour for 15mm thick cemet plalster in CM (1:4) over concrete/brick surfaces (manholes etc.) finished even and smooth without using extra cement mixed with water proofing compound pidilite LW @ 200ml per 50 Kg cement as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge (Note:-WPC will be measured and paid separately).

Supply only liquid water proofing compound pidilite LW complete all as specified and directed.

M & L preparing new plastered wall surfaces by applying 3mm thick 'Birla White' cement based putty to get smooth and even surfaces as desired by GE and applying two costs of oil bound distemper over a coat of primer complete all as specified and as directed.

M & L for two coats of cement base paint including preparation on new plastered wall surfaces complete all as specified and as directed.

M & L for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for providing two coats of synthetic enamel painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed .

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and aplying one coat of Synthetic enamal paint of any type complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

All as item no.37 here in before but for 5 Amp socket outlet on indepentant board

All as item no.37 here in before but for 5 Amp socket outlet on same board

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket all as specified and directed.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

S&F 5 Amp switch piano type single pole one way incl dismentling taking down unsv one all as specified and as directed

S&F socket flush type 6 amps, 5 pin, 230v incl dismentling taking down unsv one all as specified and as directed

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismentling taking down unsv one all as specified and as directed

S&F MCB distribution board, as MCB incomer, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way SPN all as specified and directed. Make -Legrand or equivalent of schneider or ABB as approved by GE

S&F MCB distribution board, as MCB incomer, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 4 way SPN all as specified and directed. Make Legrand or equivalent of schneider or ABB as approved by GE.

S&F MCB, Single Pole and neutral 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve. Make- Legrand or equivalent of schneider/ABB as approved by GE.

S&F MCB, Single Pole 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve. Make-Legrand or equivalent of schneider/ABB as approved by GE.

S&F LED Tube light fitting, 18 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismentling taking down unsv fitting any type all as specified and directed. Make-HPL, Cat Part No Pheonix Plus HPLLEDT1818 (CW) or equivalemt in Havells/Bajaj/Philips/CG as approved by GE.

S&F Ceilling Fan 1200mm including electronic fan regulator complete in replacement all as specified and directed . Make : Havells ES 50 or equivalent as approved by GE.

S&F Exhaust fan Metal body light duty 300 mm sweep complete with louvres all as specified , Make- Havells, cat Part No-Vent air-DS including cutting holes of required size on existing wall finishing and matching with sorrounding etc complete all as directed by Engr-In-Charge.

S&F LED security light 25 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LSTS-25-CDL or equivalent in Bajaj/Philips/HPL/Havells as approved by GE.

M & L for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 6.0 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 6.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 3.15 mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 3.15 mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Supply and lay LT UG cable 2 core 10 sqmm XLPE insulated sheathed armoured 1100 volts grade laid in trenches complete including taking out old unserviceable cable complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 mtr depth n.exc.10 Sqm on plan for foundation etc. or for laying of cable and getting out in hard/dense of soil complete all as specified and as directed.

Returning filling in including spreading , leveling watering and well ramming in layers not exceeding 25 cm thick (soil) complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 mtr above starting point complete all as specified and as directed.

M&L for stone dust cushioning for under ground cable provided with layer and sand 8 cm deep before laying the cable and 15cm after laying the cable including spreading, leveling, hand punning and consolidating complete all as specified and directed. Note: Punned thickness of sand shall be measured for payment purpose.

S & F sub-class ‘B’ brick, well burnt, laid breadth wise along the length of cable laid in trenches over stone dust sand cushion laid for UG cable Protection, complete all as specified and as directed.

S.R.M.K Enterprises

M/S SANDEEP H BHINGARDIVE

Shri Sant Cosntruction