Addn/Altn to bldg No 15/3 and 16 F of HQ MUPSA under GE (East) Lucknow

Amount

S&F solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet as per specification incl beading at top, bottom and corner .

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drwaing .

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement

Supply & apply hydrolock of two coat component acrylic polymermodifiesd cementitious high performance coating (two componenet) Minimume two coats with coverage 6-7 Sqm /kg/ 2 coats, for positive & negative side water proofing, product should have excelent bonding, good waterproofing and unmatched resistance to hydrostatic pressure and form highlyelastic film which provides elongation up to 100 as per manufacturer instruction complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and fair complete all as specified and as directed.

M & L for applying two coats of plastic emulsion paint over primer on new / old plastered surface including preparation all as directed

M & L for applying two coats of plastic emulsion paint on ceiling over a coat of Birla putty over a coat of primer on new / old plastered surface including preparation all as directed

M & L 1mm thick wall care putty on wall/ceiling, complete all as directed

Excavating in post holes soft/loose soil (or similr holes) not exc0.5 Cum getting out returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exc 50m layers and making good surfaces

M&L cement concrete in foundations filling and mass Concrete type B2 1:2:4 (40mm graded aggregate)

S&F Roof trusses (framed) in curved/straight shape trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.

M&L preparing steel surfaces over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering in curved/staright shape /cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement with Water proofing compound complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd/directed by Engr-in-Charge.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and moulding of edge including 20 mm thick screed bed in CM 1:6

Excavation in trenches n.exc. 1.5 mtr wide & n. exc. 1.5 mtr deep in soft/loose soil & getting out all as specified

M & L for PCC (1:4:8) type D2, using 40mm graded stone aggregate as in foundation fiiling & mass concrete all as specified

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 all as specified.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4

Returning, filling in including spreading, levelling watering & well ramming in layers n.exc. 25CM thick in soft/loose soil all as specified.

Spreading & levelling in layers n.exc. 25 CM thick well ramming including watering as required.

Removing excavated mtrl n.exc.50 Mtr & depositing where directed at a level n.exc.1.5Mtr above the starting point.

M & L 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone agg as in sub base of flooring all as specified.

M & L for DPC in PCC (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork 40mm thick.

-dito- as item no 4 above but in CM (1:4) on fair faces of brick work.

-ditto- as item no 4 above but 5mm thick in CM(1:3) on ceiling

M & L for RCC M-25 as in slab supported on walls beams & columns in floors, roofs, landing using 20mm graded stone agg complete all as specified and directed by Engr-in-Charge

M & L M-25 for RCC type B-1 as in lintels, beam etc. over 1.5mtr span.

M & L for RCC (1:2:4) 12.5 mm graded aggregate type B-1 as in Chajjas

M & L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips.

-dito- as per item no-34 above but MS bar as in stirrups, spacers & binders etc. 5 mm dia and over up to and including 10 mm dia bar.

M & L for formwork to soffits of suspended slabs as roof slabs, floor slabs & similar work n.exc. 250mm thick on rough finished surface of concrete.

-ditto- as item 36 above but to sides and soffits of beams , lintels etc.

ditto as item 36 above but to chajjas including edges

M & L Formwork to edges of concrete flats n.exc. 10cm wide

M & L Hardcore of guage n.exc. 63mm, deposited spread & levelled in layers n.exc.15CM thick, watered & rammed to a true surface using broken bricks 50 MM thick.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M & L for rendering 20mm thick in CM(1:4) on fair faces of brick/concrete work with WPC and finishing the surface even & smooth without using extra cement.

S&F glazed ceramic coloured tiles 7 to 8 mm thick 600 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in colour cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 complete all as specified.

M & L for non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc, Laid over 15mm thick screed bed in cm 1:4 set and jointed in neat cement slurry and pointed incl white or colour cement to match complete all as specified and directed

S&F PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and as directed.

S & F fancy type chromium plated cast copper alloy fancy type bib taps long shank with capstan head & cup 15 mm dia bore complete all as specified and as directed.

S & F 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

S&F PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .

S&F CP grating 125mm dia with waste hole (Minimium weight 40 grams)

S&F single lever Basin mixer wall mounted etc all as specified and directed.

S&F in repair 15 mm bore 2-way bib cock with flange etc all as specified and directed.

S&F vitreous china wall hung WC, UF seat close seat cover, hinges, accessories set of size 355 x 555 x 370 mm fixed to wall/floor with P/S trap complete all as specified and ditected.

S&F single piece slim concealed cistern body with installation kit & s type, drain pipe, connection set for wall hung WC complete including connection with GI pipes or connection pipe complete all as specified and ditected.

S&F vitreous china table top Wash Hand Basin of size 530 x 420 x 140 mm with bottle trap complete all as per manufacturer's instruction.

S&F health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type all as specified.

S&F Towel ring 200mm dia superior quality fixed as in repair all as approved.

S&F PVC bath cabinet with 4 mm thick looking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.

S&F in repair chromium plated box type toilet paper holder fancy all as specified.

S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair

S&F CP shop dish fancy type etc fixed on wall surfaces etc all as specified and directed.(Make - Jaquar,Plumber,Marc)

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.

Supply & fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S& F white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including all necessary fittings for connecting with pipe line, metal lockable cover.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density and plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete.

S&F gun metal gate valves with iron wheel head 20mm complete all as specified.

S&F for SGSW pipe of 150mm bore including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore SWG pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line , all as specified and directed.

M&L LLDPE septic tank 10 user complete all as specified and directed by Engr-in-Charge.

M&L construction of soakage well of size 1.8 m dia and 3.00 m deep complete all as shown in CELZ TD drawing complete all as specifed and directed by Engr-in-Charge.

S&F 12 mm thick gypsum board raised and sunk incl jointing compound and tape with GI grid 80X26X0.5 mm ceiling section at 457 mm/cc, 15X45X15X0.9 mm intermediate channel at 1220 mm c/c, 20X28X30X0.5 mm perimeter channel, 25X10X0.5 mm ceiling angle at 1220 mm c/c 9X10X28X0.5 mm shadow line bead and 2.64 mm connecting clip, soffit cleat etc complete aa as specified an directed by Engr-in-charge

M&L providing and fixing gypsum boad 12 mm thick in ceiling fixed with screw as per manufactures instruction

M&L for ATT, treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L treating the top surfaces of filled earth at the rate of 5 litres of emulsion per Sqm of surface the soil under plinth protection at the rate of 5 litre of emulsion per square of surface area complete all as specified and directed.

M&L treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

S&F harrison rails, chromium plated with fixing brackets, stops, rollers etc curtain rods 22 - 25 mm dia including Knobs and brackets complete all as specified and directed.

S&F PVC cabinet shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination and other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings (handle, magnet, autohinge etc )as per site requirment as per make and specification mentioned as per drawing and all are specified and directed. Note:- Density of PVC soild sheet should not be less than 600 Kg/cum.

M&L for roof treatment with polymeric water proofing membrane consisting of following complete all as specified and directed :- (a) Rendering 10 mm thick in CM 1:4 (b) Applying bitumin primer 85/25 grade @ 1.20 Kgs/ sqm. (c) APP modified bitumenous membrane minium weight 3 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric ( wt. not less than 150 gms/sqm) laid on primed surface by heat process, over laps of 100 mm shall be sealed / fused by flame torch application as per manufacturer instructions. (d) Applying two coat of bituminous bases aluminium paint @ 0.2 kgs/sqm over APP membrane

M & L PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks/roof gola etc

S&F 65x100 mm single rebated factory made 100% solid WPC prelam both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed

S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side prelam 14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete.

S & F Anodised aluminium powder coated frame work for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium snap beading screw , anodised aluminium fittings such as peg stays 150 mm long (01 Nos) hinges type B-21 100 mm long (2 Nos) suitable handles (1 no) complete all as specified.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sq.m in each pane complete all as specified and as directed.

S&F solar control film 25 micron reflective type (gareware sun control or equivalent)

M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate in surface channel and drains complete etc all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred /stopped ends etc

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc all as specified and directed.

M&L providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks.lawn, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 30 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in- Charge.

M&L 0.63 mm plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed

M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, of its equivalent after Complete removal of existing treatment by scrapping with TrueCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour over the plastered/old painted wall as required at site after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour. Step 1) Mix the putty powder by adding 40-50% water and mix it with Putty mixer(Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Graco Spray Machine(Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and Labour for applying two or more coats of 100% premium acrylic emulsion paint enhanced with PU serum, colour stay technology having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance exterior, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed by Engineer in Charge.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) all as specified and directed by Engineer-in-charge.

Taking down carefully Ceiling fan/Wall fan and refixing after two coat of enamel paint including all electrical fittings & fixtures all as specified and directed by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

All as per Item No 103 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 103 hereinbefore but for One 5 A socket outlet on same Board all as specified and directed.

All as per Item No 103 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Supply and fix frame plate with match cover one module plate all as specified and directed.

All as per item No. 107 above but two module all as specified and directed.

All as per item No.107 above but three module all as specified and directed.

All as per item No.107 above but four module all as specified and directed.

All as per item No. 107 above but six module all as specified and directed.

All as per item No.107 above but eight module all as specified and directed.

All as per item No. 107 above but twelve module all as specified and directed.

Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 115 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 115. above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 115. above but six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 115. above but eight modular plate of including cutting, grooving and plastering etc. all as specified and directed.

All as item No 115. above but twelve modular plate of including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified.

S&F modular bell push single pole 1 module6 Amp, 240 volt all as specified.

S&f call bell , ding dong / musical AC single phase 230 volts all as specified.

Supply and fix in rep[air of MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix MCB SP 230V, 20-32 Amps capacity all as specified and directed.

Supply and fix MCB SPN 230V, 32-63 Amps capacity all as specified and directed.

S&F Ceiling rose PVC polycarbonate all as specified and directed.

Supply and fix PVC pipe 80 mm dia for protection of cables all as specified and directed by Eng-in-Charge

Supply and fix TV Socket 1 Module Modular all as specified and directed by Eng-in-Charge

Supply and fix Telephone socket 1 Module Modular all as specified and directed by Eng-in-Charge.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum without powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified and directed by Eng-in-Charge.

Supply and fix brass coating fancy wall spot/Display/picture/Mirror light with adjustable head and colour changing fucntion 12W all as per directed.

Supply and fixing recess mounting LED light fitting 1'x1' of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI>80 and pf>0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover and including cutting of 2x2 false ceiling sheet with cutting fitting size all as specified and directed by engineer in charge.

Supply and fixing bed side light 3W LED Light all as specified and directed by Eng-in-Charge.

Supply and fixing Airfreshner fan 250mm PVC Body complete with all accessories, 230 V, Single phase all as specified and directed.

Supply and fixing Digital storage water heater (Geyser) Square type of capacity 25 ltrs, 230 volts, power consumtion 230V, vertical type, Rated pressure 5.6 bar pressure rating more than 8 bar suitable for high rise buildings,rust and shock proof ABS Outer body for lomg life,Stainless steel inner tank of 304 grade,65 MPa bar pressure,colour changing lights that change from blue to amber to indicate the hotness of water,automatic shut off including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and directed by Engr-in-Charge.

Supply and fixing decorative fancy type LED lighting fixture Single brass made bracket with 140mmX78mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection all as specified and directed by engineer in charge.

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 all as specified and directed by engineer in charge.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color incl two coats of wall colour for matching with the existing walls all as specified and directed by Eng-in-Charge.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB all as specified and directed

M/S S S A ASSOCIATES (BID ID -3350760)

suniltraders (BID ID -3354794)

Shri Siddhi Vinayak Builders (BID ID -3355771)

QUALITY CONSTRUCTIONS CO (BID ID -3347749)