CA NO CE CHZ PAT T 02 2025 26 PROVN OF DEFI SINGLE JCOs ACCN AT DAPPAR

SEWAGE DISPOSAL WORKS Construction of conventional type septic tank for 20 users to carry sewage and sullage water, (excavation in any type of soil) PCC 1:4:8 below foundation vent shaft, connection etc complete in all respect as specified and directed.

itemH1Code72

Total amount of Sch 'A' Sec-III (INTERNAL WATER SUPPLY WORKS) Lump sum price worked out by the contractor for " INTERNAL WATER SUPPLY WORKS " as listed in schedule 'A' Part-III

Total amount of Sch 'A' Sec-IV (INTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION WORKS " as listed in schedule 'A' Part-IV

Total amount of Sch 'A' Sec-V (SEWAGE DISPOSAL WORKS ) Lump sum price worked out by the contractor for " SEWAGE DISPOSAL WORKS " as listed in schedule 'A' Part-V

Total amount of Sch 'A' Sec-VI (ROAD, HARDSTANDING AND CULVERT WORKS ) Lump sum price worked out by the contractor for " ROAD, HARDSTANDING AND CULVERT WORKS " as listed in schedule 'A' Part-VI

Total amount of Sch 'A' Sec-VII ( AREA DRAINAGE WORKS ) Lump sum price worked out by the contractor for "AREA DRAINAGE WORKS " as listed in schedule 'A' Part-VII

Total amount of Sch 'A' Sec-VIII (RAIN WATER HARVESTING WORKS ) Lump sum price worked out by the contractor for "RAIN WATER HARVESTING WORKS " as listed in schedule 'A' Part-VIII

Total amount of Sch 'A' Sec-IX (EXTERNAL WATER SUPPLY WORKS ) Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY WORKS " as listed in schedule 'A' Part-IX

Supply , installation, commissioning and testing of silent CPCB approved 30 KVA TP Diesel Generating Set having diesel engine Liquid cooled with minimum 42 BHP, Electric start, four stroke, cold starting, TCI Aspirated, compression ignition, totally enclosed diesel engine with electronic governor , direct coupled with 30 KVA Three Phase alternator at 1500 RPM, 0.8 lagging power factor, providing Three Phase 415Volts suitable for 50 Hz, H class insulated winding, Close-direct-coupled, Self-excited and self-regulated type, screen protected, mounted on rigid MS sheet channel base-frame. The alternator shall confirm to IS: 13364, IS: 4722, BS5000, IEC: 34 and suitable for tropical condition. having fitted inside Canopy, fabricated out of 1.6 mm CRCA Sheet, cubical type, totally enclosed, Powder Coated, Control Panel and all accessories in- housed in a acoustic enclosure – sound proof canopy. (A). Alternator :- Standard design alternator rated at 30 KVA net output at site after considering derating as per site conditions for chandigarh area at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof IP 23 enclosure brushless design with widing in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 2613/5000 and shall be inposition to generate supply with frequecy regulation with in + 1% tolerace. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/5000/ IS - 4722. (i) Insualation class - 'H' (ii) Temparature rise Class - 'H' (iii) Excitation : Self Excited

Schedule 'A'Section-XII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 6 siginifies this fact only.

AREA DRAINAGE WORKS Material & Labour for filter media/packing material of clean course aggregate of size 20 to 40 mm wrapped with GI wire mesh of 0.56 mm nominal dia and average width of aperture 1.18 mm of size 150 X 150X 150 mm and fixed by suitable arrangement like nailing etc, and placed behind weep hole to prevent soil from entering the pipe and maintain water flow complete all as specified and directed.

Total amount of Sch 'A' Sec-X (EXTERNAL ELECTRIC SUPPLY WORKS & LIGHTNING PROTECTION) Lump sum price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY WORKS & LIGHTNING PROTECTION " as listed in schedule 'A' Part-XI

Total amount of Sch 'A' Sec-XI (LIFTS WORKS) Lump sum price worked out by the contractor for "LIFT WORKS " as listed in schedule 'A' Part-XII

INCOMING:- (a)MCCB 4P, 100Amps, 16 KA, adjustable type thermal release - 1 Nos (Incoming) (b) Suitable size of TPN Alumium bus bar with colour coading - 1 Set OUTGOING:- (a) MCCB 3 POLE , 415V. Adjustable type thermal release,25-100 Amps , 16 KA - 3 No (For Lift , Building load and spare ) (b)Microprocessor based Multifunctional digital meter with CT to display parameters like voltage,current,frequency,power factor etc. for three phase , consisting tamper proof system - 1 nos. (c) Indicator lamp -03 Nos

Material & Labour for earthing complete with copper earth plate 60 cm X 60 cm X 3.15 mm thick electrode buried vertically in ground to depth not less than 2.25 metres deep below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to copper earthing lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel including excavation and earth work in any type of soil ,and removing surplus soil to a distance not exceeding 50 metres , GI pipe light grade 40mm bore for protection of earth wire upto 7.5 metre from earth plate electrode and connected to continous earth lead on pole/test point, supplying and laying charcoal dust common salt in alternate layers (each layer shall be 15 cm thick) , GI funnel and wire mesh, 20mm dia GI pipe light grade for watering including necessary excavation and earth work, PCC 1:2:4 type -B1 and 40 mm thick RCC M-25 (Design Mix) cover with handle reinforced with 8 mm dia mild steel reinforcement at 15 cm c/c spacing in both ways with handle of 8 mm dia bar for fitting , pit cover, CI frame,all as shown and specified in electrical plate No 3 of SSR Part I complete all as specified and directed.

DG SET (Contd....) (iv) Regulation performance: The voltage is kept constant with + 1%, manual voltage adjustment within + 5% (v) Frequency regulation + 1% (B) Diesel Engine: - Adquate capacity of Diesel engine as accepted by the accepting officer based on manufacturers technical details water cooled to drive independently above alternator and after considering derating as per site conditons for chandigarh area after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (i) Fly wheel with housing (ii) Cooling system :- Moulded radiator with fan & belts. (iii) Cooling Water pump : - Centrifugal type belt driven (iv) Exhaust System :- Exhaust System complete with exhaust piping of MS light grade 150mm dia upto 1 meter away from the enclosure, covered with asbestos rope and aluminium foil complete within the enclosure for safe exhaust without transforming vibration to the wall of the enclosure with Exhaust gas turbo charger type, Exhaust manifold Silencer : Residual type Bellows (v) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governer for 1% speed /frequecy regulation, Fuel filters, Fuel hoses. (vi) Lub oil System :-Lubricating oil filter, Lubricating oil pump (vii) Air Intake System :- Air intake Manifold,Air cleanler dry type

itemH1Code73

EXTERNAL ELECTRIC SUPPLY Supply/Laying / fixing, jointing, testing and commissioning, LT under ground cable 1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified and directed of following sizes:-.

3.5 core 120 sqmm

3.5 core 35 sqmm

Drilling pilot bore hole of 150mm dia by rotary drilling method (Direct/ reverse) through rig machine for injection well in any kind of soil strate or rock including disposal of surplus soil/rock to a distace not exceeding 50 metre complete all as specified including deploying required rig machinery. T&P equipment etc complete including transporting of all materials like rig machine, tool and plants, collection of logsamples (drilling/ cutting) and to maintain drill time log book ,complete all as specified and directed

NOTES APPLICABLE TO SRL ITEM NO. 18 ABOVE : (i) The cost of earth strip GI / copper and GI pipe for protection of earth lead/strip upto 7.5m is included in the quoted rate. (ii) The earth chamber shall be constructed 50 cm away from the edge of earth pit and cost of the cost of excavation & earth work is deemed to be included in the quoted rate. (iii) The new earthing so constructed must have resistance value below 2 ohms. If aforesaid resistance value is not achieved, contractor shall make proper addition/alteration to the newly constructed earthing at his own cost.

RAIN WATER HARVESTING Loose filling with aggregates of broken stone or boulders of gauge 20 to 50 mm in soakage pits, soakage well complete all as specified and directed .

NOTES APPLICABLE TO SRL ITEM NO. 29 ABOVE : (i) The cost of earth lead /strip of GI/copper and GI pipe for protection of earth lead/strip upto 7.5m is included in the quoted rate. (ii) The earth chamber shall be constructed 50 cm away from the edge of earth pit and cost of the cost of excavation & earth work is deemed to be included in the quoted rate. (iii) The new earthing so constructed must have resistance value below 2 ohms. If aforesaid resistance value is not achieved, contractor shall make proper addition/alteration to the newly constructed earthing at his own cost.

INTERNAL ELECTRIFICATION Concealed point wiring using approved colour coding as per IS, with 1.5 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H, drawn through and including heavy duty PVC conduit (minimum 20 mm bore size 2mm wall thickness) and conduit accessories ISI marked, PVC junction boxes ,modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any module from 2 to 18 modules with inner and outer modular cover plates etc, including 1.5 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note-(i) Cutting/Chases of wall etc.deemed to be included in the quoted rates of this item (ii) Modular GI metal flush/sunken box along with modular base/front cover plate/blank plates are inclusive in the item rate wuoted (iii) Only switch, socket and fan regulators shall be measured and paid separately)

One light/exhaust/Call Bell point controlled by one, 1 way switch /Bell push

One fan point controlled by one ,1 way switch through fan regulator

One 3-Pin socket outlet point 6A on same board

One 3-Pin socket outlet point 6A on independent board

One light point controlled by two 2-way switches

MCB, SP, 6 to 32 Amp, 240 Volts, 6 KA, 'B' curve, complete all as specified.

Supply and fixing LED lights fitting 1x 20 Watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and directed.

DG SET (Contd....) (iv) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes. (v) MS pipe line to and from the fuel tank to the DG Set. (F). Civil Works :- All civil works including PCC plat form as per manufacture's design also 30 cm above the ground. The depth of the foundation and P