Replacement of old wiring and switch socket, OBD etc. in remaining 12 Nos. Type II quarters pump houses, including basement area and 20 Nos. SDO type III houses in BBMB colony, Sector 36 A and B, Chandigarh.

Amount

RECESSED HDPE PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE conduit pipe 20mm/25mm dia. (ISI Marked), recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i) a Wiring fan point (Without fan box) CSR item No. 34.06 (i) (a)

(ii) Wiring light point. CSR item No. 34.06 (ii)

(iii) Wiring call-bell point. CSR item No. 34.06 (iii)

(iv) Wiring 6Amp. wall socket point. CSR item No. 34.06 (iv)

(vi) Wiring 16/20Amp. power plug control point. CSR item No.34.06 (vi)

(viii) Wiring light point with double control switches. CSR item No. 34.06 (viii)

RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): (ix) Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. CSR item No. 34.01 (ix)

MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C). CSR item No. 34.16(A) (ii)

(viii) MCB Double Pole 50, 63amp. (10kA, CurveC). CSR item No. 34.16(A)(viii)

(xvi) MCB Four Pole 50, 63amp. (10kA, Curve-C). CSr item No. 34.16(A)(xvi)

(xv) MCB Four Pole 40amp. (10kA, Curve-C). CSR item No. 34.16 (A) (xv)

MCCB's (MOULDED CASE CIRCUIT BREAKER): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- (ii) MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting. CSR item No. 34.23(C)(ii)

MS SHEET ENCLOSURE FOR MCCB's: (i) Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- (a) MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm. CSR item No. 34.23(D)(i)(a)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no.of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (iv) SP&N Double Door Distribution Board 16 way each. CSR item No. 34.17(iv)

(x) TP&N Vertical Double Door Distribution Board 8 way each. CSR item No. 34.17(x)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-. (iii) Overall size 2.5sq.mm (Un-sheathed). CSR item No. 34.09(iii)

(iv) Overall size 4sq.mm (Un-sheathed). CSR item No. 34.09(iv)

(i) Overall size 1sq.mm (Un-sheathed). CSR item No. 34.09(i)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed. CSR item No. 16.12

Scraping (a) White wash and colour wash. CSR item No. 8.31(a)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. CSR item No. 16.65

DISMANTLING WIRING POINTS & FITTINGS: Dismantling old wiring points including necessary repairs to wall etc:- (i) Fan, light or call bell point. CSR item No. 34.39(i)

DISMANTLING WIRING POINTS & FITTINGS: Dismantling old wiring points including necessary repairs to wall etc:-(ii) Wall socket, power plug point. CSR item No. 34.39(ii)

Bidder Name

Amount in Words

SJ Enterprises (BID ID -818377)

NARENDER SINGH CONTRACTOR (BID ID -818664)

Rajat Soni (BID ID -828331)

NARENDER SINGH CONTRACTOR (BID ID -818664)

Rajat Soni (BID ID -828331)