GE(S) BTD TOKEN NO 65 OF 2023-24 MISCELLANEOUS REPAIRS ATTENDING DAY TO DAY COMPLAINTS OF BR AND EM WORKS OF VARIOUS BUILDINGS OF ARMY PUBLIC SCHOOL SAGAT SINGH AUDITORIUM ASTC CSC AND JADUNATH ENCLAVE UNDER AGE BR I UNDER GE (SOUTH) BATHINDA AT BAT

Amount

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. in ground floors and pavings n. exc 15 cm thickness (below or above ground level) all as specified

M&L for 100 mm thick cement concrete 1:3:6, type C2 (40mm graded aggregate) as in sub bases, sub floor and paving etc complete all as specified and directed.

M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) all as specified

M & L light shade vitrified tiles 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6. and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified

M & L Vitrified tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plastered/terrazzo finishes/old tiles etc; complete, all as specified

M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 and including dismantling of old tiles/terrazzo finish etc, complete all as specified

M & L for full body scratch free, straight cut joint free vitrified tiles 10-12 mm thick (square/ rectangular) ultra charged/double charged area of each tile not exceeding 1 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:4. and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified

M & L glazed / ceramic coloured tiles of approved quality in vertical surfaces 350mm X 250 mm x7mm/450 x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazzo finish etc; complete all as specified

M & L glazed / ultra charged / double charged ceramic coloured tiles of approved quality in vertical surfaces 200mm X 300 mm x7mm/450 x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazzo finish etc; complete all as specified

M&L for linoleum (min 2mm thick), coloured, laid dry in floors including stretching, cutting and fitting including linoleum is sealed down with an approved adhesive

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar.

M & L marble work note less than 16 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified

S&F 16 to 18mm dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment

All as per item 13 above here-in-before by except stone complete all as specified and directed.

M&L 18-20mm thick granite (as approved) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Machine cut kota stone slab flooring 18-22 mm thick over 15 mm thick in CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing, grinding and polishing (mirror finish) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-22 mm thick in riser/trends of steps(in Single piece), skirting, dado and pillars over 10 mm thick rendering in 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing, riding and polishing mirror finish complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block (with grey cement and pigment) any shape and size of any colour/pattern as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and include 25mm thick sand bed/cushioning complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block (with grey cement and pigment) any shape and size of any colour/pattern as approved confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade over and including 25mm thick sand bed/cushioning complete all as specified and directed.

All as per item no. 19 above here-in-before by except interlocking tiles over and including dismantling of old interlocking tiles 25mm thick sand bed/cushioning complete all as specified and directed.

M&L for Chequred cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and no pigment set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

S&F aluminium glazed windows/ventilators with frame of size 123 x 38.10 x 2mm comprising of shutter openable, rails and stiles of Z-sec (33.3 x44x1.3mm) Section No S-382 of Jindal or equivalent of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.

S&F aluminium glazed door with frame of size 100 x45x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.

S&F powder coated aluminium glazed and gauged door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.

M&L prelaminated partical board 12 mm thick,interrior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber/ aluminium frame with snap grid complete all as specified and directed.

Repair to aluminum door shutter, window, sliding windows, ventilator partition by replacing joining cleats glazing clips rubber packing andoised aluminum snap beading, screws etc complete all as specified and directed. Note : Sheet glas, particle board will be measured and paid separately if provided at site.

S & F in repair 4 lever brass mortice lock,vertical type of size100 mm complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F Door closer hydraulically regulated, aluminium body (extruded section) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F 12mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including necessary fixing/supporting arrangements like handle, cleats, heavy duty floor spring etc cutting to shape, drilling holes, design, and similar work as requiredincluding complete taking down of existing glass handles, hinges complete etc. and also including the firm for logo & sign complete all as specified and directed.

S & F in repair floor machine (size 25cm x 12cm) for glass door including complete taking down of existing glass door opening using aluminium cleats etc.complete all as specified and directed. (before quoted rate for this item please confirm at Sagat Singh Auditorium).

S&F in repairs 5.5mm thick sheet glass ordinary quality and fitting with PVC rubber beading for door and windows in squares exc 0.50 sqm in each pane complete all as specified and directed.

S & F in repairs double point panic bar length 950mm and height upto 2400mm complete all as specified and directed.(before quoted rate for this item please confirm at Sagat Singh Auditorium).

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

M&L for POP for ceiling/corner of any design or pattern design on concrete or plaster surfaces of any description complete all as specified and directed.

Dismantling boarding any description fixed in any position with rails incl fillets

S&F Anodised aluminium snap grid frame work for false ceiling grid Size of grid 605 x 605mm including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long at any height and position complete all as specified and directed by Engr-in-Charge.

S&F 6mm thick non asbestos fibre cement designer building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed by Engr-in-Charge.

Fixing only 600 x 600mm x 4mm thick E Board classic as in false ceiling height for work up to 15 mtr. The rates quoted by the contractor is deemed to be including with necessary scaffolding, safety belts, and other saftey feature complete all as specified and directed. (Before quoted rate for the said item, please visit at Sagat Singh Auditorium).

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F solid PVC Wall Lining consisting of 5mm thick of any colour / design PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and directed by Engr-in-Charge.

S&F for 5mm thick aluminium composite panel (ACP) of approved colour one side covered with retro reflective sheet on wall cladding/ceiling at any height/position including with all necessary fixing arrangements and writing / printing letters, numbers, comma, dashes etc with retro reflective tape, cut to size (Block, italic, Roman etc. exc. 30 cm high) as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framed work.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or cranked hook bolts

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing

M&L for providing precast cement concrete louvers and jallies, 25mm thick Type B0 1:2:4 (12.5mm graded aggregate) (measured solid), set in cement mortar (1:4) including all mouldings, but excluding frame (Pre cast frame shall be measured and paid separately) complete all as specified and directed.

Providing precast cement concrete using type B0 1:2:4 (12.5mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc., complete all as specified

M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified Note : The rate includes for cleaning of old bricks.

M&L brick work with sub class 'B' (Old Size) bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4).

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified

M & L 15 mm thick rendering in CM (1:6) on brick surfaces or conc surfaces on walls and finished even and smooth without using extra cement all as specified

M & L 15 mm thick rendering in CM (1:4) using water proofing compound as per manufacturer's instruction (WPC to be measured & paid separately) on brick work or concrete surfaces and finished even and smooth without using extra cement all as specified

M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chajjas etc; in CM 1:3 finished even and smooth without using extra cement all as specified

Supply only integral water proofing compound of approved quality

M & L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces all as specified

M &L for applying two coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces all as specified

M&L for applying two coats of oil bound distemper ( to match with the adjacent shade or tint) over a coat of primer on newly plastered wall surfaces including applying wall putty to make up depression etc and to the surface even & smooth including preparation of these surfaces all as specified

M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directed by Engineer-in-Charge.

M&L applying one coat of cement base paint on Old decorated surfaces of walls , chajjas etc.; complete all as specified

Complete removal of existing treatment on walls and applying two coat of cement base paint over a coat of primer on old decorated surfaces of walls , chajjas etc.; complete all as specified

M & L for applying one coat of weather proof exterior emulsion paint of approved tint or shade on wall surfaces including preparation of surfaces complete all as specified and directed. Note:- Smart periodical methodology using airless spay sander airless graco machine/roller by authorized applicator and approved make.

M&L for Complete removal of existing treatment of any description on old wall surfaces of any description, preparation of surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified. (b) Two coats of exterior acrylic emulsion by using airless spray/roller over and including a coat of acrylic emulsion external primer, complete all as specified.

M&L for writing letter or figure not exceeding 30 cm height complete all as specified and directed.

Demolition of cement concrete (re-inforced) of any description and in any position not otherwise specifically provided for all as specified.

Providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) as in manholes covers, Kitchen sink slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and Chajjas etc and the like, complete all as specified.

Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and spiral stair case not exceeding 200mm tick complete all as specified.

M&L providing cement concrete (RCC/PCC) 1:2:4, type B0 (12.5mm graded aggregate) as in broken or cracked Chajjas, RCC columns, beams, stairs/steps etc in one or two layers as required (thickness from 25mm to 40mm) and finishing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portions and applying neat cement slurry before providing concrete, complete all as specified (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in four story buildings 2. Reinforcement if required to be provided for repairs of chajjas, beams, columns, stairs etc will be measured & paid in subsequent item separately )

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F in repairs Mild steel galvanised wire cloth 0.46mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified

S & F in repairs 300mm mild steel ordinary rat tail rod springs, including roller & roller plate complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified

S&F fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, window, door etc at any height and position complete all as specified and directed by Engr-in-Charge.

S&F Heat absorbing glass, 5mm thick and glazing complete with beads fixed with brass screws, rubber beading etc fixed in aluminium door/windows/ventilator etc complete all as specified and directed by Engr-in-Charge.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down or up old GI pipe complete all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down or up old GI pipe complete all as specified

S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with o without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified

S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe all as specified

S & F in repairs 15mm bore fancy type chromium plated bib taps, quarter turn cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S & F in repairs 15mm bore concealed angle cock screwed both ends for iron pipe all as specified

S & F repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S & F in repairs PVC lid (cover) for 500 to 1000 ltr capacity PVC water tanks with hinging & locking arrangement complete all as specified

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 25mm bore ( weight 210 gms Minimum) complete all as specified

S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union all as specified

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality

S&F in repairs health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified.

S&F in repairs Jet spray CP, brass body with wall hook and 1 mtr SS pipe complete all as specified.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified

S & F in repairs 32/40mm waste fittings for stainless steel sink(sink coupling) , brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified

S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap all as specified

S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified

S & F in repair PVC valveless, symphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connecting to flush pipe of any size and pattern complete all as specified

S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified

S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified

S&F in repairs stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip 1mm, fixed on wall etc complete all as specified & directed by Engr-in-Charge.

S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps incl taking down etc all as specified

S & F 110 mm bore, PVC (SWR) fittings such as bends of any radius, tee, shoe etc; fixed to PVC pipes, complete all as specified

Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or any type and re-fixing the same after minor repairs such as replacement of washers etc or complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc required to be replaced, shall be measured as supply only and paid for accordingly)

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified

S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories, all as directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall, laid in trenches incl all fittings & accessories, all as directed.

S & F cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified.

S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified.

Sealing only joints of cast iron pipes and fittings 75/100mm dia with chemical cement and making the joints leak proof complete all as specified

S&F in repairs oval access doors to cast iron pipes of 75mm bore with rubber washer packing & bolts & nuts as required complete all as specified

S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified

S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified

S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified

S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors

S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed by Engineer - in – Charge.

S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section all as specified

Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.

Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.

Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified

Supply only floor trap 75 mm dia with grating including jointing to waste pipe

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames).

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified

Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified

Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed.

Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.

S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.

S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.

M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified

M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6..

S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant

S&F factory Made Solid PVC Moulded Door Shutter (with wood free EPS), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm gde stone agg) as in filling of Chowkhats.

S&F for galvanised MS wire cloth 0.46 mm nominal dia and wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples.

S&F butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specified.

S&F for MS tower bolt 200 mm long stove enameled black with bright bolt.

S&F for MS sliding door bolt 250 mm long stove enameled black with bright bolt etc.

S&F for MS pressed handles, oval type stove enameled black 125 mm long.

S&F for Aluminium handles, cast type anodised 125 mm long for cup boards and doors.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30mm all as specified

M&L for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified

S&F in repairs end knobs for PVC coated MS pipe curtain rods, complete all as specified

S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring all as specified Each 150.00 89.30 13395.00 9149

Cleaning of water tanks exc 250 & n. exc 500 ltr capacity including removing all scale & dirt, etc., from tanks and from mouths of circulating pipes etc. all as specified

Cleaning of water tanks exc 500 & n. exc 1000 ltr capacity including removing all scale & dirt, etc., from tanks and from mouths of circulating pipes etc. all as specified

S&F in repairs three layers rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position 500 litre capacity white in colour complete all as specified and directed.

S&F in repairs three layers rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 1000 litres capacity white in colour complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified

S&F in repairs plastic water closet seat cover white/ivory colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

M & L for Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion & 2.25 litres per linear metre including drilling and plugging holes etc in apron/plinth etc., complete all as specified and as directed

M & L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors. Complete all as specified and as directed.

M & L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole at 300mm intervals incl drilling holes at 45 degree and re-plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to match the existing floors. Complete all as specified and as directed.

S & F Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified

S&F in repair Switch modular type single pole, one way, 6 Amp, one module, complete all as specified.

S&F in repair Switch modular type single pole one way, 16 Amp, one module, complete all as specified.

S&F in repair Socket outlet modular type, multipurpose, 2/3 pin, single pole one way, 6 Amp, two module, complete all as specified.

S&F in repair Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, complete all as specified.

S&F in repair Fan regulator, modular type, 5 step, high speed, two module complete all as specified.

S&F in repair Switch piano, flush type single pole, one way 5 Amp complete all as specified

S&F in repair Switch piano, flush type single pole, one way 15 Amp complete all as specified

S&F in repair Socket outlet 3 pin, 5A, flush type all as specified

S&F in repair Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified

S&F in repair Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply.

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified.(Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length)

S&F in replacement sheet metal encloser double door 12 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

-do- all as per item No 186 above but 04 way TPN 415 V complete all as specified and directed.

S&F in repair MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified

S&F in repair MCB 20-32 Amp 240V SPN 10 KA ‘B’ series complete all as specified

S&F in repair MCB 415V 40 to 100Amp TPN 10 KA ‘B’ series complete all as specified

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 3000/6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete complete including making connection complete all as specified and directed.

S&F in repair LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed

S&F in repair LED flood light fitting sqaure shape 150 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrossion resistant complete with IP 65/66 protection with suitable bolt and nuts, fixing at any height upto 15m complete with making connection complete all as specified and directed

S&F in repair LED downlighter/spot light fitting, recessed mounted, round shaped of ceiling cut outφ160mm, 12watts efficacy not less than 90 lumen/watt, 6500K extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F in repair LED panel light fitting, recessed mounted, square shaped of size (595x595x65)mm, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F in repair LED panel light fitting, surface mounted, square shaped of size (600x600x70) mm, 34(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F in repair LED panel light fitting, recessed mounted, rectangle shaped of size (1195x295x70) mm, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F in repair post top lantern LED type 20/25 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistance complete with driver and lamp complete all as specified and directed

Supplying and fixing in replacement metal halide lamp 150w double ended complete all as specified

Supplying and fixing in replacement metal halide lamp 150w single ended threaded complete all as specified

Supplying and fixing in replacement LED 9Watt 2 pin lamp, G24, 6500K,efficacy not less than 90 Lm /watt complete all as specified

Supplying and fixing in replacement LED 7Watt base B22, 6500K,efficacy not less than 90 Lm /watt complete all as specified

Supplying and fixing in replacement halogen lamp1000w double ended complete all as specified

Supplying and fixing in replacement 1000 W Halogen Bipin T-11 lamp for stage lightening complete all as specified

Supplying and fixing in replacement LED Step/foot light 5W for auditorium/cinemhall steps made of PC 3000/6500K complete all as specified

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

MODERN ENTERPRISES

M/S SAI BUILDERS

K L JINDAL AND CO.

G N CONSTRUCTIONS

M/S KARTIK BUILDERS

V K CONTRACTOR

Aman Enterprises

M/s Manav Builders

M/s Verma Construction Company