GE 874/EWS-41/2021-22

Amount

E/M Portion

Attending complaints for day to day/daily complaints by employed skilled staff, checking the serviceability of fan coil units and Air Conditioners of any capacity for having continous serviceability of FCU/ AC for any number of times as desired by Engr-in-charge incl replacement of minor spare parts like gasket, Electronoc boards and components, teflon tape, flare nut, tightening of any loose glycol connections, shifting FCU/ AC from one place to another place if required, heating up the freezed glycol line anywhere about the premises to have continous flow of glycol fluid, repairing the insulation pipes of any size by providing shallow pipe/ GI pipe as deemed fit for failing the insulation of pipe line,tightening the loose electrical connections as related with FCU/ AC,heating system, cleaning the air filter incl radiator of FCU to the entire satisfaction of Engr-in-charge all as directed. (i) Attending complaints of different nature in a single day in entire Grn incl ops room and MI room will be considered one job. (ii)Any replacement of major parts will be measured and paid seperately under respective items of Sch A.

(iii) Any nature of complaints related to FCU, radiator,bursting /cracking/leakage MS pipe lines, replacement of valves etc will be completed round the clock by suitable tradesman(welder with suitable T&P incl potable heating materials, skilled mech of CHS,plumber/fitter with helper, supervisor). (iv) Job slip will be maintained by the contractor supervisor under the supervision of JE E/M. (v) Any delay, of more than 48 hrs from intimation, in attending complaints will be reported to higher authorities and suitable penalities will be incurred from contractor( Rs 1000/- per job)

Disconnecting all electrical connection from central heating burner of make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintenance , removing wornout/defective spare parts and the replacement of following parts including servicing and testing on completion, complete all as specified. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only Ignition Transformer suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only oil flow sequence controller suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Fuel feed pump suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Photocell suitable for burnersuitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Nozzle suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Solenoid valves suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Disconnecting all electrical connection from central heating burner of makeEcoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintanance , removing wornout/defective spare parts and the replacement of following parts including servicing and testing on completion, complete all as specified. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only Ignition Transformer suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only oil flow sequence controller suitable for burner make Ecoflame Model Minor-14 DTC Max pressure 2 bar)and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Fuel feed pump suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Photocell suitable for burner make Ecoflame Model Minor-14 DTC Max pressure 2 bar)and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss .

Supply only Nozzle suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss,

Supply only Solenoid valves suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss,

Disconnecting all electrical connection from boiler and dismantling burner of make Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 from inlet opening central heating plant and set aside for repair and maintenance , removing wornout/defective spare parts and the replacement of following parts including servicing and testing on completion, complete all as specified. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only Ignition Transformer suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only oil flow sequence controller suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Fuel feed pump suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Photocell suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Nozzle suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Solenoid valves suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 bar and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Dismantling boiler of capacity 200000/ 100000 Kcal/hr by disconnecting all electric connections and unscrewing glycol tubing to isolate combustion chamber of boiler . Opening the inlet cover of Boiler by unscrewing the nut bolt and taking out the unserviceable coil made out of MS from the chamber with engagement of Tripod and chain pulley wihtout damaging internal chamber including cleaning of carbon content(scaling) to max clean with the help of heavy duty compressor including disposal of waste outside of cantonment area and replacement of damage parts of boiler complete all as directed by Engr-in-charge. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only burnt fire crete matti all as specified

Supply only asbstos foam all as specified

Supply only Inner glycol tubing of all as specified

Supply only Inner Piping Glass of all as specified

Supply and fixing of Asbestos Rope on Exhaust of bioler central heating plant up to wall all as specified and directed.

Material and labour for replacment of pressure guage suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified

Material and labour for replacment of Transperent Fuel Filter suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified

Material and labour for replacment Fuel pipe for fuel pump suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified

Material and labour for replacment Fuel tee suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified

Supply and fix butterfly gate valve 100 mm dia having nitrate seat and epoxy coated disc CI with hand leaver pressure rating PN 1.0 complete all as specified and as directed. Make - C&R/ kirloskar/ Zoloto.

Supply and fix air release valve (ARV) to automatically release trapped air from a heating system 25mm dia. complete all as specified and as directed. Make - C&R/ kirloskar/ Zoloto.

Disconnecting all electrical connections from blower and motor of Air handling unit at 428 FD HOSP (Make thermax) blower compartment incl dismantling of all pre filters, microfilters,aluminium perforated sheet over glass fibre wool panels , blowermotor incl connecting after repair / replacements of following parts including servicing and testing on completion, all as specified and directed by Eng-in-charge. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only prefilters having aluminium frame as per sample

Supply only Micro filters having aluminium frame as per sample

Supply only aluminium perforated sheet panel over 50 mm thick glass fibre wool as per sample

Supply only centre bearings for blower shaft incl CI housing all as per sample

Supply only v belts size B77 all as specified

Supply only foam for AHU Shatters all as specified

Repair of rediator checking for leakage of copper tubes and discaling of Glycol tubing including welding bleasing as requaired at site

Cleaning the chimney of heating plants from inside with wire brushes and removing away all carbon deposited and painting the outer surface of the chimney with two coats of heat proof black paint after preparing the surface for repainting complete all as directed.

Supply and fixing in replacement decorative wall mounted fan coil units of capacity 4500 Kcal/Hr CFM 470 complete with grill, ESB casing 3 speed motor, wall mounting brackets inlet out let mainfold all as directed and specified by Engr-in-Charge. Make - Western Model No WFC-4 or equivalent in Caryaire/ zeco/ airflow.

Repair of damages in CHS pipeline system with SMAW/ GMAW/ GTAW welding work, including electrodes/ filler material, for one damage of upto 2 meters long on the pipeline complete all as directed.

Supply and laying,connecting , fixing and testing in replacement of 3 layer poly propylene random copolymer composit pipes 25mm/20mm bore OD pipe conforming to PN1.6 complete with fittings duly insulated with 13mm thick closed cell elastomeric insulation 30 to 40 Kg/m3 density all as directed and specified by Engr-in-Charge.

Supply and fixing in replacement aluminium cladding over MS pipe and AHU duct with 24 guage aluminium sheet incl over lapping,screwing and well finishing complete all as specified

Supply & fixing in replacement of gun metal steam stop valve of 25mm bore screwed on both ends. Make Sant,CIM,Zoloto

Supply & fixing in replacemnet of gun metal steam stop valve of 20mm bore screwed on both ends. Make Sant,CIM,Zoloto

Supply & fixing in replacement of gun metal steam stop valve of 15mm bore screwed on both ends. Make Sant,CIM,Zoloto

Supply and fixing in replacement Heavy duty wiremesh bounded fuel pipe with flare nut both ends 600 mm length as per sample complete all as directed by Engr-in-charge.

Supply and fixing in replacement fuel filter element as per sample complete all as directed by Engr-in-charge.

Supply and fixing in replacement polyurethane pipe for hot water flow suitably connecting at inlet and outlet of FCU of size 16mmx12mm capable of of taking over 10 bar pressure ISI marked and temp 85 deg celsius all as specified and directed. Make K N K or as approved by GE.

Supply and fixing in replacement Nitrile foam insulation over CHS MS ERW heating pipes, of size 3/4" ID X 1/2 " TK ( 19 mm x 13mm ) all as specified and directed Make Superlon,Sant

Supply and fixing in replacement Nitrile foam insulation over CHS MS ERW heating pipes, of size 7/8" ID X 1/2 " TK ( 22 mm x 13mm ) all as specified and directed Make Superlon,Sant

Supply and fixing in replacement Nitrile foam insulation over CHS MS ERW heating pipes, of size 4" ID X 3/4 " TK ( 102 mm x 19mm ) all as specified and directed Make Superlon,Sant

Supply and fixing in replacement Nitrile foam insulation over CHS MS ERW heating pipes, of size 3 1/8" ID X 1/2 " TK ( 80 mm x 13mm ) all as specified and directed Make Superlon,Sant

Repair and maintenance of wall mounted type Fan coil unit ( Inner Unit complete) of make Western modle - WFC-04/ WFC-3000 after disconnecting electric connections including servicing and washing of condensor and replacement of following parts with existing make (Capacity upto 4500Kcal/Hr) and specifications as approved by the Engineer-in-charge: Note :- The cost of labour for repair and replacement of worn out/defective spare parts included in this item and parts to be replaced shall be measured and paid separetely and minor part included with this like tap roll etc.

Supply, Installation, Commissioning and testing of Blower motor for FCU of make Western model No WFC-04/ WFC-3000

Supply, Installation, Commissioning and testing of PCB for FCU of make Western model No WFC-04/ WFC-3000 and for Air Conditioner of capacity upto 2 ton

Supply, Installation, Commissioning and testing of Display Board for FCU of make Western model No WFC-04/ WFC-3000

Supply, Installation, Commissioning and testing of Nozzle Sets for inner units for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

Supply, Installation, Commissioning and testing of Pressure Valve for inner units for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

Supply, Installation, Commissioning and testing of Rubber Rings for for stopage of leakage in inner units pipe for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed for fixing of inclusive of one primer coat, one under coat and one finishing coat of paint.complete all as specified and directed.

Supply only of pre printed registers of ISO A3 size of 300 usable sheets with inbuilt carbon sheet consisting of three different coloured papers for use as user completion registers, site order book, sample approval register, gate pass for use in contracts etc, the layout of the registers will be made available to the contractor by MES complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M & L for point wiring for One light /one fan/one bell point controlled by one switch with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping or conduit pipes, with wooded or white coloured casing caping (as directed and specified) including accessories and provinsing of PVC boxes for mounting switches, switch socket, fan regulator, provn of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly. Make of wire :-Havells/ Finolex/L&T. Make of casing caping- Poly plast/ pressfit/ Presto plast

All as per item no. 68 above but for One socket outlet 5 pins 5 amps controlled by one switch on same board, complete as directed by engineer in charge.

All as per item no. 69 above but for One socket outlet 5 pins 5 amps controlled by one switch on independent board complete as directed by engineer in charge.

All as per item No 70 here in before but wiring with 2.5 sqmm copper wire ( FR) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .

M & L for concealed point wiring for One light /one fan/one bell point controlled by one switch with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular type metal Flush box with cover plate for fixing of switches, sockets,light, fan regulators etc for the following complete all as specified.

All as per item No. 72 here in before but for One socket outlet 5 pins 5 amps controlled by one switch on same board, complete as directed by engineer in charge.

All as per item No. 73 here in before but for One socket outlet 5 pins 5 amps controlled by one switch on independent board complete as directed by engineer in charge.

All as per item No 74 herein before but wiring with 2.5 sqmm copper wire ( FR) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .

S&F switch piano flush button single pole, one way 5 amps complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells .

S&F socket outlet multi 5 pins 5 amp, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F switch socket combination 2 in 1, 5A flush type, complete as directed and specified by engineer in charge.

S&F switch piano flush button single pole, one way 15amps, complete as directed and specified by engineer in charge. complete all as specified and directed. Make - Anchor/Plaza/Cona.

S&F socket outlet 2 in 1, 6 pins 15 amp, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S & F switch socket combination 3 pin 16A, flush type, complete as directed and specified by engineer in charge.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate (back plate of wooden or white pattern) suitable for batten/wall fitting of wooden pattern or white, complete as directed and specified by engineer in charge.. Make - Anchor/SSK/Cona Havells

Supply and Fix only stepped type electronic fan regulator 1 module, complete as directed and specified by engineer in charge.. Make : Anchor/Cona/SSK.

S&F Modular switch 1 way 6A, 1 module, flush button single pole, one way, wooden pattern, complete as directed and specified by engineer in charge. complete all as specified and directed. Make - Anchor/Plaza/Cona.

S&F Modular switch 1 way 16A, 1 module, flush button single pole, one way, wooden pattern, complete as directed and specified by engineer in charge. complete all as specified and directed. Make - Anchor/Plaza/Cona.

S&F modular socket outlet 2 in 1, 6 pins 6A and 16A, combined module, wooden pattern, complete as directed and specified by engineer in charge.. Make - Anchor/SSK/Cona Havells

S&F modular white cover plate with frame, 1 to 2 module, wooden pattern, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F modular white cover plate with frame, 3 to 4 module, wooden pattern, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F modular white cover plate with frame, 6 module, wooden pattern, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F modular white cover plate with frame, 8 module, wooden pattern, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

S&F sheet metal enclosure for DBs (single door type), wooden enamel finish or painted (as specified and directed), when MCBs to be used single pole and neutral 12 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type), wooden enamel finish or painted (as specified and directed), when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type), wooden enamel finish or painted (as specified and directed), when MCBs to be used single pole and neutral 4 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole & neutral 6 to 32 Amps 230 Volts'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T,

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge. Make : Leggrand/Havells/HPL.

S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

Supply Only Table lamp, designer hanging type, 7 watts, with designer ceramic or designer glassware dome of 600mm, enamelled bronze/ stainless steel base, with LED lamp, including necessary wiring and accessories required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

Taking down UNSV Bulk Head fitting by carefully unscrewing from boards/ outlet boxes, fittings and fixtures and carrying to the store

S&F LED Bulk Head luminaires, designer type, with 5 Watts lights and IP55 in engineering plastic housing with clear prismatic diffuser, with lamp holders, ceiling rose, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make of light fitting - C&S, Philips, Syska, Wipro or equivalent as approved by engineer in charge.

Supply and fixing recess mounting Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling 36 watts suitable for Armstrong/Grid ceiling compatible for Analog / DALI Dimming.Fixture size in mm (LxWxH) 595x595x65.Make Havells Cat No of fitting- VENUSNEOHE2X2PLR18-42WLED830MOD and Cat Part No of Driver LEDDRIVER36V36WS or equailent of philips/ wipro.

Supply and fix in replacement LED 9 w ,230v Indoor recess mounting down light circular and flat type, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make Havells, Philips ,C&S

supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 basewitth 1x20 watt LED lamp complete all as specified and directed by Engr-in-charge . Make Havells, Philips ,C&S

supply and fix in replacement 1x9 watt LED lamp (B-22 Base) 230v decorative wall mounting type with multicolour ABS housing with poly carbonate rings, and with, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed by Engr-in-charge.

supply and fix in replacement unique LED flood/ focus light 20 W LED 6500 K with IP 65 protection complete all as specified and directed by Engr-in-charge Make Havells, Philips ,C&S

S&F sheet metal enclosure for Triple Pole Neutral type DBs (double door type), with back cover, wooden enamel finish or painted (as specified and directed), when MCBs to be used 4 to 12 way (as directed) incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche, with MCB provided by MES, complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F MCCB/ RCBO (as directed) four pole 16 to 100 Amps (as required at site) 415 Volts, 16 KA complete all as specified and directed.Make: Havels /Legrand/ L&T

M&L for Repair and replacment unserviceable wornout/ Burnt parts of Voltage Stablizer upto 10 KVA of any make complete all as specified and directed by Engr-in-charge

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

Supply only copper thimble of size 25 sqmm

Supply only copper thimble of size 35 sqmm

Supply only copper thimble of size 50 sqmm

Supply only aluminium thimble of size 70 sqmm

Supply only aluminium thimble of size 95 sqmm

Supply only aluminium thimble of size 120 sqmm

Supply only aluminium thimble of size 150 sqmm

Supply only aluminium thimble of size 185 sqmm

Supply only aluminium thimble of size 240 sqmm

Supply Only LED Bulb, 7 Watt, B27/ E14 pin type (as directed), warm white, all as directed and specified by engineer in charge, of make of Havells/ Polycab/ Anchor/ Syska/ Bajaj, etc

supply and fix in replacement Decorative LED tube light fitting 18W/ 20W B22 basewitth 1x18watt LED complete all as specified and directed by Engr-in-charge . Make Havells, Philips ,C&S

Supply Only LED Bulb, 7 Watt, thread type (as directed), white, all as directed and specified by engineer in charge, of make of Havells/ Polycab/ Anchor/ Syska/ Bajaj, etc

Supply Only LED adore, 5.5 Watt, GU10 base cap (as directed), white, all as directed and specified by engineer in charge, of make of Havells/ Polycab/ Anchor/ Syska/ Bajaj, etc

M&L rewinding of ceiling fan (or industrial exhaust fan) with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 1200 /1400 mm sweep by dismantling its parts, capacitor by replacing petty items such as split pins,clamps, nuts & bolts, capacitor, bearing & washer both end of down rod, cleaning of fan body and its blade by cleaning agent, assembling and connecting testing all as specified and as directed by Engr-in-Charge. For rewinding, complete old winding has to be removed and winding with new copper wire to be done. When rewinding is not possible, complete fan stator/ rotor will be changed as required.

Painting of ceiling/ exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor by replacing petty items such as nuts & bolts,bearing & washers, capacitor, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing Complete. For rewinding, complete old winding has to be removed and winding with new copper wire to be done. When rewinding is not possible, complete fan stator/ rotor will be changed as required.

Supply and fixing ball bearing suitable for Ceiling and exhaust fan of any sweep and make complete. Make : TATA/ NBC/ SKF.

S&F Exhaust fan blade suitable for any sweep fan of any make.

S&F of gun metal bush suitable for any sweep fan of any make.

S&F of heating elemant with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers.

S&F of heating elemant with new one capacity of 2000 Watts for 50 Ltr geyser(triangle type).

S&F of heating elemant with new one capacity of 3000 Watts for 225 Ltr geyser.

S&F of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Supply Only of copper Geyser Assembly with rubber paking for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

S & F and testing of compressor for window/ split type air conditioner of capcity 1.5/2 ton and taking down of UNSV compressor, all as specified and directed by Engr-in-charge Make of AC - LG, Samsung.

S & F and testing of blower motor compatible with inverter split type AC of Make voltas

Repair/ Replacement of UNSV Copper Tubing, for Split Type AC including soldering works and necessary sockets, etc.

S & F and testing of thermistor (temprature Sensor) for split type air conditioner of capcity 1.5/2 ton and taking down UNSV thermistor, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of PCB for window/ split type air conditioner of capcity upto 2 ton and for FCUs of capacity upto 4500 kCal/hr and taking down UNSV PCB, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

Supply and fixing, in improvement/ enhancement/ replacement of heating dehumidifier element of ACs/ CHS, Oil Filled Radiators, of minimum 11 Fins, of minimum 2900 Watts, PTC cutoff type, of Make Usha/ Havells/ Morphy Richards, all as directed and specified by engineer in charge

S & F and testing of Blower for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge

S & F and testing of transformer for split type air conditioner of capcity 1.5/2 ton and taking down UNSV transformer, all as specified and directed by Engr-in-charge

S & F and testing of out door unit fan blade for split type air conditioner of capcity 2/ 1.5 ton and taking down UNSV unit, all as specified and directed by Engr-in-charge

S & F and testing of outer unit fan motor unit, complete, of split type air conditioner of capcity 1.5/2 ton and taking down of UNSV unit, all as specified and directed by Engr-in-charge

S & F and testing of 2 Way Valve Assembly of split type air conditioner of capcity 1.5/2 ton and taking down of UNSV unit, all as specified and directed by Engr-in-charge

Supply and fixing of Capaciter 50 MFD (or as required) for 1.5 / 2 ton AC complete all as specifide and directed.

Supply , fixing and testing of 3 Way Valve Assembly controling of cooling and heating of split type air conditioner of capcity 2/ 1.5 ton and taking down UNSV valve complete all as specified and directed by Engr-in-charge

Supply Only of gas R-22/ R-410/R32/ R134a Refrigerant Gas in small disposable cylinders as directed by engineer in charge

Supply and refilling of gas R-22/ R-410/R32/ R134a for split/ window/ central package type Air conditioners and Refrigerators incl checking and fixing leakage complete all as specified and directed by Engrs-in-charge.

Supply and Fixing Industrial Type Single Pole and Neutral Sheet metal enclosure with one Single pole MCB 10 - 20A two pin and earth plug and socket complete

Supply and Fixing Exhaust Fan 225/230mm sweep plastic body,230V , Make-Havells/Crompton/Plaza/Khaitan complete all as directed by Engr-in -harge

Supply and fixing in replacement of Stabiliser for 2 Ton Air Conditioner, Digital Type, of Model of V Guard -VG500 or equivalent as approved by engineer in charge

Supply and fixing in replacement of compressior for Refigerator/Deep freezer for any type and make quivalent as approved by engineer in charge

Supply and fixing in replacement of Filter Dryer for Refigerator/Deep freezer for any type and make quivalent as approved by engineer in charge

Supply and fixing in replacement of capaliery tube for Refigerator/Deep freezer for any size and make quivalent as approved by engineer in charge

M/S ASHRAF CONSTRUCTIONS

POPULARHARDWARESTORE

Bidder Name

M/S ASHRAF CONSTRUCTIONS

POPULARHARDWARESTORE

GH MOHD SHAH AND CO