Work of developing a room in the Government Girls Inter College in Mahoba district as a digital library

Dismentling of old exisiting damage plaster and desposal of refuse PWD SOR No 706

12mm thick plaster work in 1:3 cement and fine sand mortor on ceiling DSR Code No 13.7.1

12mm thick plaster work in 1:4 cement and fine sand mortor on walls DSR Code No 13.1.1

P/Laying of Ferrow cement concrete in 1:2:4 cement appd coarse sand and 20mm stone grite and mixing water proofing compound at the rate of 1 kg./ Bag of cement in thickness of 5cm. Avrage including embedding of expended metal jali of 6 gauge iron wire including and fixing over slab including 6mm thick cement plaster in 1:2 cement and c sand mortor finished with floating coate of need cement PWD SOR New Item 2 page No 37

Dismentaling of old Tile work in floor laid in cement mortor DSR Code No 15.23.1

Laying of PCC in 1:4:8 with cement , c sand and 40 mm stone ballast as base concrete DSR Code No 4.1.8

p/laying of vitrified tiles in different sizes with water absorption less than 0.08% .including grouting of joints ,laid with 1:3 cement sand mortar complete DSR No 11.47.2

Scraping of old exisiting damage White / colour wash and desposal of refuse PWD SOR No 708 ch. 17

P/ applying plaster of paris putty of avg. thickness 2mm of appd. Brand over the plastered wall surface to prepare to surface even and smooth DSR No 13.26

finishing wall tex tured exterior paint of required shad : new work ( two or more coat) @3.28ltr /10sqm over and including priming coat of exterior primer applied @2.20kg /10sqm DSR Code No 13.45.1

Painting with synthetic enamel paint of appd. Brand two or more coats over an under coat DSR Code No 13.62.1

P/F Powder coated Aluminium work for windows for frame and sliding pannel com. In all respect DSR Code No 21.1.1.2

P/F 5 mm thick Glazing in Aluminium window shutter with EPDM rubber /Neoprene gasket com.in all respect DSR Code No 21.3.2

P/F of ISI marked Flush door shutters decorative type with ISI marked stainless steel butt hinges DSR Code No 9.20.1

P/F of PVC panneling on walls including supply of pannel , labour T &P com. As per lowest market rate olny for estimated purpose

P/F in posion teak wood perforated partcal board ceiling tils bonded with BWP type phenol formaldehyde sythetic resin tils in size 60cm.x60cm.x13mm with alluminium chanal /M.S. Angle ceiling sextion with 12mm diaM.S. bar henger including three coat paints over one coat of pink primer with decorative ceiling tils . SOR Chapter 12 Page 40 (9b)

S/F computor table

Two door book self ( wooden glass frame Almirah)

Office table

Student chair ( Low back steel frame comfort chair )

S/F of digital library including 18 no desktops with AI -powered PAL Platforms, with ineractive flat pannel complete in all respect( as per attached quotation)

S/F of 2 Tonne capacity Split AC (5 Star range ) with stablizer and stand with installation

Sanitary fitting +drainage work +plumbering work

imformation board + photography

Supply of 3 KW Solar Power Plant (off grid) with module mounting structure , 48V, 240AH Battery (MNRE Approved) backup , 4.0 KVA Invertor etc …. Complete (5 year warranty)

Installation Charges

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C- DSR 1.10.3

Submains : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire- DSR1.14.1

Submains :Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire- DSR1.14.3

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.- DSR1.25

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.- DSR1.31

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.- DSR1.32

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for A.C. Point/MCB Point)- DSR1.57

Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)-4 way (4 + 12), Double door- DSR2.4.1

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.- DSR2.1-Single pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. - Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A-Marcket Rate

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.- DSR5.4

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)- DSR5.9

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.- Marcket Rate.

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA- DSR-1413

Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA- Marcket Rate

Supply and fixing of 3 watt to 6 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) - Marcket Rate

Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size - Marcket Rate size 25 sq mm x 3-1/2core

Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. - Marcket Rate

Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. Marcket Rate