Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-AOC 36 137 THANGAMAPURIPATTINAM METTUR DAM 636 402 | SALEM | TAMIL NADU | 636402 | ₹3.8 L Quoted ₹4.2 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | SRI V M A ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00 | BFP 3B MOTOR:
Charges for disconnection of power cable de- coupling the motor from pump and checking alignment of the motor shaft with pump shaft. | 1 | Nos | 7,755 ₹7,755 |
| 2.00 | Charges for removal of end covers and measuring the air gap and magnetic axis. | 1 | Nos | 2,631 ₹2,631 |
| 3.00 | Charges for removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location. | 1 | Nos | 5,338 ₹5,338 |
| 4.00 | Charges for removal of sleeve bearings, resting the rotor on the stator after placing rubber sheet. | 1 | Nos | 12,236 ₹12,236 |
| 5.00 | Charges for removal of foundation bolts, lifting the motor to a convenient location. | 1 | Nos | 12,236 ₹12,236 |
| 6.00 | OVERHAULING OF MOTOR:-a) OVERHAULING OF STATOR: Charges for Inspection and cleaning and checking of stator windings, fastening of the stator winding to the end ring and also the inter coil spacers and packing in the overhang portion of the windings tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR Value, DC resistance and Tan delta. Packing in the overhang portion of the windings, tightness the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR value, DC resistance and Tan delta. | 1 | Nos | 69,288 ₹69,288 |
| 7.00 | b) OVERHAULING OF ROTOR: Charges for Inspection and cleaning of released rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, cleaning of overheated and burnt places and applying one coat of Dr.Beck’s insulating varnish and drying out. | 1 | Nos | 17,654 ₹17,654 |
| 8.00 | c) Charges for cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc. | 1 | Nos | 37,805 ₹37,805 |
| 9.00 | d) Charges for checking the bearing and preparation of bearing surface and blue matching the housing. | 1 | Nos | 14,772 ₹14,772 |
| 10.00 | Charges for lifting and erection of the motor back on its bed after cleaning and checking healthiness of pedestal insulation. | 1 | Nos | 12,236 ₹12,236 |
Tender Value
Refer Docs
EMD Value
₹3,900
Closing Date
3 Oct 2025, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPS-I ES Circle EMI UnitIII Complete overhaul of 1 No 3500KW, 6.6KV HT Motor BFP-3B Sl.No 44201-T421-11-02 and 1 No. 500KW , 6.6 KV HT motor CEP-3A Sl.No 321 A404 01 04 during Unit III AOH 2025.
2025_EB_604844_1
CE-MTPSI-SE-ES-EM-I-OT74-25-26
Open Tender
Electrical Works
20 days
MTPS-I/METTURDAM
AS PER TENDER SPECIFICATION
4 documents required · 4 mandatory
₹0
₹3,900
Yes
16 May 2026
18 Sept 2025
4 Oct 2025
18 Sept 2025
3 Oct 2025
18 Sept 2025
Amount
BFP 3B MOTOR: Charges for disconnection of power cable de- coupling the motor from pump and checking alignment of the motor shaft with pump shaft.
Charges for removal of end covers and measuring the air gap and magnetic axis.
Charges for removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location.
Charges for removal of sleeve bearings, resting the rotor on the stator after placing rubber sheet.
Charges for removal of foundation bolts, lifting the motor to a convenient location.
OVERHAULING OF MOTOR:-a) OVERHAULING OF STATOR: Charges for Inspection and cleaning and checking of stator windings, fastening of the stator winding to the end ring and also the inter coil spacers and packing in the overhang portion of the windings tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR Value, DC resistance and Tan delta. Packing in the overhang portion of the windings, tightness the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR value, DC resistance and Tan delta.
b) OVERHAULING OF ROTOR: Charges for Inspection and cleaning of released rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, cleaning of overheated and burnt places and applying one coat of Dr.Beck’s insulating varnish and drying out.
c) Charges for cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc.
d) Charges for checking the bearing and preparation of bearing surface and blue matching the housing.
Charges for lifting and erection of the motor back on its bed after cleaning and checking healthiness of pedestal insulation.
Charges for assembling of sleeve bearings, checking the interference between the bearings and housing, checking the clearance between shaft and bearing.
Charges for assembling the end covers, checking air gap and magnetic axis.
Charges for lifting the cooler assembly, fixing with motor and connecting the water pipes etc.
Charges for termination of power cable, coupling the pump with motor and checking alignment of the motor shaft with pump shaft.
Charges for tightening of bed bolts, foundation bolts, checking the IR value, DC resistance and trial run the motor in decouple/ couple condition running the motor satisfactorily.
Charges for painting the motor complete surface and fan blade with 2 coats of standard Grey enamel paint. Area of 1 No. BFP HT Motor-46 M2
CEP 3A MOTOR: Charges for disconnection of power cable,de -coupling of the motor from pump and checking alignment.
Charges for removal of foundation bolts and lifting the motor to a convenient location.
Charges for dismantling of motor side pulley, cooler, end covers and threading out the rotor.
Charges for cleaning and checking of cooler tubes
OVERHAULING OF STATOR: Charges for Inspection, cleaning of stator & its winding, fastening of the winding to the end ring & the inner coil spacers and packing in the overhang portion of the winding. Tightening of the wedges, spraying one coat of Dr.Beck’svarnish and drying out, Stator preheating, checking the IR Value and DC resistance.
OVERHAULING OF ROTOR: Charges for Inspection, cleaning of rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, soldered end winding, cleaning of overheated burnt places and applying two coats of Dr.Beck’s protective enamel and drying out.
Charges for Releasing the bearing, cleaning, checking and reassembling/ replacing the bearing on both ends lubrication etc., (DE Bearing NU 326 to be supplied by TNPGCL) (NDE bearing under contractor scope)
Charges for Assembling the motor after threading in the rotor and fixing end covers. Providing rubber gasket and fixing the cooler unit, Checking the IR value, DC resistance and Tan Delta.
Charges for Lifting the motor, Placing at motor bed and tightening of foundation bolts, bed bolt etc.
Charges for Termination of power cable, coupling the motor with pump, checking alignment and trial run.
Charges for painting the motor complete surface and fan blade with 2 coats of standard Grey enamel paint. Area of 1 No. CEP HT Motors
Smoke Grey enamel paint
Dr.Beck varnish
Thinner
Ball Bearing CEP motor NDE side 7322 BMP (Brass cage), make: FAG
Cost of consumables (LS)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_722960.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
