REPAIR REPLACEMENT OF VARIOUS STEEL FURNITURE INCLUDING POLISHING AND PAINTING OF OTMS AREA AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

(CHAIR CB STEEL TUBULAR WITH ARMS) Removing the worn out paint by scraping from the steel surface, necessary preparation of surface for painting and welding wherever required, two coat of spray painting with synthetic enamelled paint olive green over a coat of Metal primer after dent/bent portion. Wooden surface should be black polish to required glazed and shine. (Drg No. FD-75(M))

Removing the worn out u/s seat frame and providing/fixing the new one of existing size made out of 1st class teak wood duly re-caning with new plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screw(plastic cane type-I HDPE). (Drg No. FD-75(M))

All as per item no.2 here-in-before but for back frame of Chair CB Steel Tubular With Arms. (Drg No. FD-75(M))

Removing the worn out u/s handle made out of well seasoned teak wood and providing/fixing of exisiting size and shape with required screw after finish with black polish. (Drg No. FD-75(M))

(CHAIR CB STEEL TUBULAR WITHOUT ARMS) Removing the worn out paint by scraping from the steel surface, necessary preparation of surface for painting and welding wherever required, two coat of spray painting with synthetic enamelled paint olive green over a coat of Metal primer after dent/bent portion. Wooden surface should be black polish to required glazed and shine. (Drg No. FD-75(M))

Removing the worn out u/s seat frame and providing/fixing the new one of existing size made out of 1st class teak wood duly re-caning with new plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screw(plastic cane type-I HDPE). (Drg No. FD-75(M))

All as per item no.6 here-in-before but for back frame of Chair CB Steel Tubular Without Arms. (Drg No. FD-75(M))

(TABLE OFFICE OFFICER STEEL) Removing old broken damaged top of table office officer steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered of existing shape and size with 19x4mm teak wood beading duly french polished all around the top. (Drg No. FD-84)

Removing old u/s internal drawer locks from table office officer steel and S/F new internal drawer locks 40mm 4 lever with duplicate keys of approved quality. (Drg No. FD-84)

Removing old broken u/s hard rubber shoes of table office officer steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing. (Drg No. FD-84)

Removing the worn out paint from internal/external surface of Table office officer steel by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge. (Drg No. FD-84)

(TABLE OFFICE CLERK STEEL) Removing old broken damaged top of table office clerk steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered of existing shape and size with 19x4mm teak wood beading duly french polished all around the top. (Drg No. FD-34(M))

Removing old u/s internal cupboard/drawer locks from table office clerk steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality. (Drg No. FD-34(M))

Removing old broken u/s rubber shoes of table office clerk steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel. (Drg No. FD-34(M))

Removing the worn out paint from internal/external surface of Table office Clerk steel by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge. (Drg No. FD-34(M))

(LMIRAH STEEL MEDIUM) Taking out of broken door shutter from Almirah med Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing. (Drg No, FD-67(M)/ 1032/TP)

Removing the worn out u/s handle from the almirah med steel and providing/fixing of new handle chromium plated heavy quality as approved by Engr-in-Charge. (Drg No, FD-67(M)/ 1032/TP)

Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge duly fixed as per drawing. (Drg No, FD-67(M)/ 1032/TP)

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg. (Drg No, FD-67(M)/ 1032/TP)

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. (Drg No, FD-67(M)/ 1032/TP)

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. (Drg No, FD-67(M)/ 1032/TP)

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of Metal primer to bring the surface to a glossy shine as directed by Engr-in-Charge. (Drg No, FD-67(M)/ 1032/TP)

(ALMIRAH STEEL LARGE) Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing. (Drg No FD-1031/TP)

Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge. (Drg No FD-1031/TP)

Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge duly fixed as per drawing. (Drg No FD-1031/TP)

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg. (Drg No FD-1031/TP)

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. (Drg No FD-1031/TP)

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. (Drg No FD-1031/TP)

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge. (Drg No FD-1031/TP)

(CHARPOY GI PIPE 32 MM PLYTOP) Remove the existing unserviceable Ply wood from Charpoy GI Pipe and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. (Drg No. FD-220)

Removing the unserviceable/broken check nuts form GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit). (Drg No. FD-220)

Removing the existing unserviceable broken 3 way GI elbow and S & F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit). (Drg No. FD-220)

Removing the existing unserviceable/broken long rail and S & F new long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Drg No. FD-220)

Removing the existing unserviceable/broken short rail and S & F new short rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Drg No. FD-220)

Making legs out of unserviceable long/short rails obtained from item 04 and 05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge. (Drg No. FD-220)

(CHARPOY FOLDING IP WITH HARDTOP) Remove the existing unserviceable Ply wood from Charpoy Folding IP with hard top and making the frame to its original position by tightening/welding etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. (Drg No. FD-388)

Removing unserviceable check nuts and supply & fix new nuts in charpoy IP Folding Hard top of existing shape and size and as directed by Engr-in-charge. (Drg No. FD-388)

Removing unsv Pipe and S&F new pipe for legs/short/long rail of Charpoy IP Folding Hard top of existing shape and size and as directed by Engr-in-charge. (Drg No. FD-388)

De-rusting/cleaning the frame of Charpoy IP Folding with Hard top to smooth surface and painting all steel surface with two coat of synthetic enameled OG Paint over a coat of Red Oxide primer to bring the surface with glossy finish. (Drg No. FD-388)

(CHARPOY IP WITH HARD TOP) Remove the existing unserviceable Ply wood from Charpoy IP with hard top and making the frame to its original position by tightening/welding etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. (Drg No. FD/MAP-11/01)

Removing unserviceable check nuts and supply & fix new nuts in charpoy IP Hard top of existing shape and size and as directed by Engr-in-charge. (Drg No. FD/MAP-11/01)

De-rusting/cleaning the frame of Charpoy IP with Hard top to smooth surface and painting all steel surface with two coat of synthetic enameled Black Paint over a coat of Red Oxide primer to bring the surface with glossy finish. (Drg No. FD/MAP-11/01)

M/S Subhadip Enterprise (BID ID -3385806)

M/S New Builders Corporation (BID ID -3393223)