REPAIR/REPLACEMENT TO SUBMAIN WIRE, MCB DB, AC BOX, INDOOR UNIT INCLUDING SERVICE CONNECTION FOR SPLIT/WINDOW TYPE AC ALONGWITH CERTAIN MISC WORKS AT VARIOUS LOCATION UNDER GE E/M LUCKNOW

Amount

Submain wiring in existing conduit comprising 6.0 sqmm + 1x6.00 sqmm earth wire nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade complete all as specified and directed by Engineer-in-Charge

Sub main wiring (concealed type ) with two single core 6 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 6Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 6 Sqmm ,1 run of PVC conduit & 1 run of 6 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

Sub main wiring (concealed type ) with two single core 4 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 4 Sqmm ,1 run of PVC conduit & 1 run of 4 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

Switch socket combination 16 Amps, 6 pin 3 module with PVC box complete all as specified and as directed by Engineer-in- Charge.

Plug and socket DBs with Single pole MCB rated 6-32 Amps capacity with socket plug top 2 pin and earth plug complete all as specified of standered make including making good disturbed surface of wall and mounted flush , complete all as specificed and directed by Engineer-in-Charge.

MCB SP, 05 to 32 Amp 10 kA, 240 volts AC 'C' curve fixed as in replacment , complete all as specified and as directed by Engineer-in-Charge.

MCB SPN, 32 Amp 10 kA, 240 volts AC 'C' curve fixed as in replacment , complete all as specified and as directed by Engineer-in-Charge.

Sheet Metal enclosures with Socket plugtop and MCB 32 Amps triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB including making good distrubed surface of wall etc complete all as specified and directed by Engineer-in-Charge

MCB TPN 32 Amps, 10 KA 440V AC 'C' series ISI Marked complete all as specified and directged by Engineer-in-Charge.

S&F sheet Metal enclosures for DBs when MCB to be used triple pole and neutral 4 way (Double door) including making good distributed surface of wall etc complete all as specified and directed by Engineer-in- Charge.

Distribution box epoxy powder coated ,SPN 8 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed by Engineer-in- Charge.

Distribution box epoxy powder coated ,SPN 4 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 complete all as specified and directed by Engineer-in- Charge.

Distribution box epoxy powder coated ,SPN 2 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 complete all as specified and directed by Engineer-in- Charge.

Contactor ML-1, , 240 Volt, 25Amps rating including taking out unserviceable contractor , complete all as specified and as directed by Engineer- in- Charge.

Flexible pipe 20 mm dia with PVc clip complete all as specified and directed by EIC.

Flat twin core ,10 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable in and including taking out of old unservicable cable , complete all as specified and as directed by Engineer-in-Charge.

Flat twin core ,6 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable in and including taking out of old unservicable cable , complete all as specified and as directed by Engineer-in-Charge.

LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 4 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers including jointing and testing complete and taking out unserviceable cable , complete all as specified and directed by Engineer-in- Charge. Note : Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per Item No 18 above but 10 sqmm cross sectional area, 4 core

All as per Item No 18 above but 25 sqmm cross sectional area, 4 core

MCCB 63 Amp 3 pole 16 KA fixed type 415 volts 50 Hz with spreader and suitable size of cable lugs/thimble complete including all electrical connection and making good the damaged surface after disconnecting all existing electrical connection from panel including testing and taking out unserviceable MCCB and cable from LT panel Board , complete all as specified and directed by Engineer-in-Charge.

MCCB 100 Amp 3 pole 16 KA fixed type 415 volts 50 Hz with spreader and suitable size of cable lugs/thimble complete including all electrical connection and making good the damaged surface after disconnecting all existing electrical connection from panel including testing and taking out unserviceable MCCB and cable from LT panel Board , complete all as specified and directed by Engineer-in-Charge.

Disconnecting ACs, Water Coolers, Refrigerators, Deep freezers and Voltage stabilizers and fixing only spares required to make it fully functional in all respect and handing over the report duly signed by the user by name to concern JE complete all as specified and directed by Engineer-in- Charge. (Spare parts shall be measured and paid separately under appropriate items)

New PCB for 1.5/2.0 TR Split AC Inverter type( hot & cold) including remote and with all acessories complete all as specified and directed by Engineer-in-charge.(Make-Samsung/LG or others as required)

Mettalic Plugs ( top) of AC box 20A, specified make , 2P+E and connecting complete all as specified and directed by Engineer-in- Charge.

Supply & Charging (Top up) the AC unit of 1.5 TR / 2 TR split type AC unit with refrigerant gas R-22/R-32/R-410 in required Qty complete all as specified and directed by Engineer-in- Charge.

Dismantling carefully front cover of indoor unit split type AC of any make & model of capacity 1.5 / 2 TR and disconnecting the water drain pipe for cleaning sludge etc refixing the water drain pipe at its original position of indoor unit including provision of necessary accessories for fixing of drain pipe and testing complete for proper functioning of indoor unit and refixing of front cover complete all as specified and directed by Engineer-in- Charge.

Servicing of Indoor unit and outdoor unit by means of electric blower & water under pressure ,cleaning & washing of cooling/condencing coil by soap solution or recommended chemical ,, & greasing of moving parts such as blower motor etc complete of 1.5 TR capacity complete all as specified and directed by Engineer-in- Charge.

Servicing of Indoor unit and outdoor unit by means of electric blower & water under pressure ,cleaning & washing of cooling/condencing coil by soap solution or recommended chemical ,, & greasing of moving parts such as blower motor etc complete of 2 TR capacity complete all as specified and directed by Engineer-in- Charge.

Dismantling of existing window type AC. from its location and refixing after doing the following repairs wherever required and as directed by EIC. (a) Servicing & cleaning with liquid soap , cleaning of fins by means of air blower and water with pressure jet and changing of air filter complete with cleaning of Cooling & Condensing coil all as directed by EIC. (b) M&L for painting of outer cage and front grill window type A/C with two coats of synthetic enameled paint of approved shade and tint including preparation of steel surface by emery paper including writing SM No. / MES No. etc with front of grill complete all as specified and directed by Engineer-in- Charge.

PVC pipe nylon imbraided 15 mm dia for condensed water drain fitted with clamps/concealed in wall, in repiars complete all as specified and directed by Engineer-in- Charge.

PVC insulated three core stranded copper cable of size 80/0.20 ( 2.5 sqmm) in repairs complete all as specified and directed by Engineer-in- Charge.

Nitrogen pressure testing,flushing out the system by Nitrogen ,vacumrnation and charging of refrigerant gas R-22/R-32/R-410 into the system for 1.5 TR capacity split type AC complete all as specified and directed by Engineer-in- Charge. (The refrigerant gas R-22 will be provided by Contractor)

Nitrogen pressure testing,flushing out the system by Nitrogen ,vacumrnation and charging of refrigerant gas R-22/R-32/R-410 into the system for 1.5/2 TR capacity split type AC complete all as specified and directed by Engineer-in- Charge. (The refrigerant gas R-22 will be provided by Contractor)

Nitrogen pressure testing Flushing out the system by Nitrogen ,vacumrnation and charging of refrigerant gas R-22/R-32/R-410 into the system for 1.5 TR/ 2 TR capacity Window type AC complete all as specified and directed by Engineer-in- Charge. (The refrigerant gas R-22 will be provided by Contractor)

Dismantling of defective PCB of 1.5/2.0 TR capacity Split AC inverter type of any make & (hot& cold type) from indoor unit and transporting to contractors workshop for repair of the same,transporting back to site & refixing to indoor unit to ensure proper functioning of the AC complete all as specified and directed by Engineer-in- Charge.

Dismantling of defective PCB of 1.5/2.0 TR capacity SplitAC of any make &(cooling only/hot& cold type) from indoor unit and transporting to contractors workshop for repair of the same,transporting back to site & refixing to indoor unit to ensure proper functioning of the AC complete all as specified and directed by Engineer-in- Charge.

Power unit 16 Amp with 4 Module plate, 16 Amp Plug and socketg including 4 Module PVC box fior mnounting the power unit complete all as specified and directed by Engineer-in- Charge.

Cooling coil of 165/190/195 litres capacities refrigerator after disconnecting the cooling coil from refrigerator, Nitrogen gas pressure testing and flushing out the system and charging of Non CFC gas as per required quantity and testing complete all as specified and directed by Engineer-in- Charge.

All as per item No 39 above but for capacity of 286/300/310 ltrs (1/6 TR) refrigrators

Condensing coil of 165/190/195 litres capacities refrigerator by disconnecting condensing coil from refrigerator, N2 pressure testing and flushing out the system and charging of Non CFC gas as per required quantity and testing in repairs complete all as specified and directed by Engineer-in- Charge.

All as per item No 41 above but for capacity of 286/300/310 ltrs (1/6 TR) refrigrators

Checking of leakage in refrigerant system of refrigerator of 165/190/195 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed by Engineer-in- Charge.

Checking of leakage in refrigerant system of refrigerator of 286 /300/310 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed by Engineer-in- Charge.

Starting relay, open type for refrigerator of capacity 165/300/310 litres in repairs complete all as specified and directed by Engineer-in- Charge.

Thermostat defrost type for refrigerator in repairs complete all as specified and directed by Engineer-in- Charge.

Thermostat non defrost type for refrigerator in repairs complete all as specified and directed by Engineer-in- Charge.

Dismantling of defective condensing unit ( outdoor unit) of spilt type AC of 2 TR capacity and supply & fixing new condensing unit ( except compressor) complete with condensing coil, coil frame, wiring kit and running capacitor, relay, condensing motor with blade complete all as specified and directed by Engineer-in- Charge. ( Make :- Totaline/ Bluestar/LG/Voltas/Daikin/Hitachi)

Dismantling of defective indoor unit of 1.5 TR capacity split type AC and supply and fixing new indoor unit of the same capacity in working condition with blower motor, front grill and all other connected items and connecting the copper tubing by brazing detecting leak and rectifying the same and recharging with Non CFC refrigerant gas as required the unit in wall/ceiling mounted complete all as specified and directed by Engineer-in- Charge. (Make:-Totaline / BlueStar / LG / Voltas / Daikin / Hitachi)

Dismantling of defective outdoor unit of 1.5 TR capacity split type AC and supply and fixing new outdoor unit of the same capacity in working condition with blower motor,fan, and condensing unit of copper, and cabinet and all other connected electricals and items for connecting with indoor unit and connecting the copper tubing by brazing detecting leak and rectifying the same and recharging with refrigerant gas as required with stand and installing the unit in wall/ceiling mounted complete all as specified and directed by Engineer-in- Charge. (Make:-Totaline / BlueStar / LG / Voltas / Daikin / Hitachi)

Dismantling of defective condensing unit ( outdoor unit) of spilt type AC of 1.5 TR capacity and supply & fixing new condensing unit ( except compressor) complete with condensing coil, coil frame, wiring kit and running capacitor, relay, condensing motor with blade complete all as specified and directed by Engineer-in- Charge. ( Make :- Totaline/ Bluestar/LG/Voltas/Daikin/Hitachi)

Supply only R-134 gas suitable for Refrigerators / Deep Freezers/ Water coolers in sealed cylinder complete all as specified and directed by Engineer-in-Charge.

Disconnecting of water cooler of 150 litres capacities from its position, taking out water from its water tank, cleaning of water tank by washing with washing powder and with fresh water externally and internally and spray painting with synthetic enamel paint of approved tint/colour to all painted surface of water cooler of following capacities after preparation of old painted surfaces without disturbing the components & wiring etc. complete and reconnceting complete all as specified and directed by Engineer-in- Charge.

All as per item No 53 above but for 40 / 80 Litres capacities of water coolers

All as per item No 53 above but for 60 / 120 Litres capacities of water coolers

Checking of leakage in refrigerant system of water cooler of 150 litres capacity by putting nitrogen under pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuumising the system including charging refrigerant gas Non CFC in required quantity all complete all as specified and directed by Engineer-in- Charge.

All as per item No 56 above but for 40 / 80 and 60/120 Litres capacities of water coolers

Transporting defective blower motor of 1/ 16 HP capacities from AGE E/M yard to contractor's workshop, dismantling the burnt winding & rewinding of blower motor with the existing size super enameled copper winding wire including insulation, varnishing, greasing, testing and transporting back to AGE E/M yard for refixing at the site complete all as specified and directed by Engineer-in- Charge.

All as per item No 58 above but but for capacity of1/8 HP

Wall mounted air cooled digital display voltage stablizer 4 KVA for automatic voltage correction single phase naturally air cooled indoor type and designed for input variation between 160 v 260 v with output voltage stabilizer at 220 volts+/- 9% volt and hig low voltage cutoff with facility of including instant start & time delay relay of 3 minute capacity complete all as specified and directed by EIC. (Make:- Blue Bird/ Integ/ Voltas/ V gaurd/EE or equivalant)

Taking out defective blower motor from window type AC of cap 1.5/2.0 TR or outdoor unit of Split type AC of capacity 1.5 TR / 2 TR and transporting defective motor of any make & capacity from site to contractor workshop dismantling the burnt winding & rewinding of 1 / 5 to 1 / 8 HP blower motor with the required size of super enameled copper winding wire of suitable gauge including insulation, varnishing, greasing, testing complete and transporting to back to site and refixing complete all as specified and directed by Engineer-in- Charge.

Supply in repairs indoor motor of split type AC of capacity 1.5 TR / 2.0 TR of any make as per suitable for complete all as specified and directed by Engineer-in-Charge

Taking out carefully 325 to 500 mm sweep desert cooler from its existing position from stand or pillar, removing the side panels, taking out cut wood pads or loose pads and disposed to a distance not exceeding 50 metres away as directed by EIC and spray painting with synthetic enamel paint of approved color (inside and outside) after preparation of old painted surfaces and reassembling and fixing in position including renewal of new wood pads complete all as specified and as directed by Engineer-in-Charge.

Repairing of leakage of tank by brazing/soldering of any size of desert cooler, testing the leakage water complete all as specified and as directed by Engineer-in-Charge.

Renewal of PVC front grill complete all as specified and as directed by Engineer-in-Charge. ( Make Orient/ Anchor or equivalent of other specified make)

Renewal of control switch/dimmer electronic 650 watt complete all as specified and as directed by Engineer-in-Charge. ( Make :- Anchor or other specified make)

Renewal of set of panels made out of PGI sheet 22 gauge thick with wood wool pads, in required quantity duly filled complete all as specified and as directed by Engineer-in-Charge.

Renewal of sprinkle pipe, PVC heavy duty 15 mm dia with tee, elbow etc. for 24"/18" sweep desert cooler complete all as specified and as directed by Engineer-in-Charge.

Renewal of PVC distributor suitable for 15 mm dia PVC Pipe, PVC elbow & connection of PVC pipe from pump to distributor suitable for 18"/24" sweep desert cooler complete all as specified and as directed by Engineer-in-Charge.

Renewal of desert cooler body, suitable for 450 mm/500 mm sweep exhaust fan /kit, made out of 22 gauge PGI sheet with front grill and side panel with switch regulator and spray painting (double coat) with synthetic enamel paint of approved color (inside and outside) complete all as specified and as directed by Engineer-in-Charge. Make ;- Champion or equivalent of other specified make.

Renewal of Polycarbonate Plug top 3 pin16 A .Make :- Cat No.386237/3993of Anchor or other equivalent of specified make) complete all as specified and as directed by Engineer-in-Charge.

Renewal of Polycarbonate Plug top 3 pin 6 A .Make :- Cat No.386226/3982of Anchor or other equivalent of specified make) complete all as specified and as directed by Engineer-in-Charge.

Renewal of kit fan, motor, single phase, 230 volt AC, 1/3 HP, complete with blade arm 18" sweep size suitable for desert cooler complete all as specified and as directed by Engineer-in-Charge. (Make:- Jyoti / Champion / Summer Cool)

Renewal of exhaust fan motor, single phase, 230 volt AC, 1/3 HP, complete with blade arm 18"/20" sweep size suitable for desert cooler complete all as specified and as directed by Engineer-in-Charge. (Make:- Crompton / Khaitan /USHA/HAVELLS /ORIENT)

Supply and fixing in replacement submersible pump for desert cooler single phase, 1/40 HP, 230 volts complete all as specified and as directed by Engineer-in-Charge. Make- TULLU/KSB/JYOTI)

Khus pad (As per sample) suitable for desert cooler 16" / 24" sweep in repairs complete all as specified and as directed by Engineer-in-Charge.

Wood wool (As per sample) suitable for desert cooler 24" sweep in repairs complete all as specified and as directed by Engineer-in-Charge.

Wood wool pad (As per sample) suitable for desert cooler 325 mm to 500mm sweep in repairs complete all as specified and as directed by Engineer-in-Charge.

Worn out wiremesh rectangular / square fitted with all the three side panels of desert cooler of 15"/24" any make made out of 24 SWG 10mm aperture including rivetting and renewing the cut wood pads in repairs complete all as specified and as directed by Engineer-in-Charge. (Renewal of Wood pads shall be measured and paid separately).

Renewal of capacitor Single Phase , 230 V, AC, of following capacities 2.5 MFD complete all as specified and as directed by Engineer-in-Charge.

All as per item No 81 above but 4.0 MFD.

Collection of unserviceable voltage stabilizers of any make of 4kVA/ 5kVA capacities from AGE store yard & transporting it to local workshop of the contractor, dismantling the stablizer for repairs of the defective parts/ spares & reassembling including repairs of defective screws, rubber shoes, testing & painting with two coats of synthetic enamelled paint after removing old paint and repairs body etc depositing back to MES stores yard complete all as specified and as directed by Engineer-in-Charge. (Note: Spares /parts renewed shall be paid for separately under respective items at appropriate rates).

Relay 25/30 Amps 24 Volt for 4 KVA/ 5 KVA voltage stablizers in repairs complete all as specified and as directed by Engineer-in-Charge. Make- Dunmag, Eaglemen, Powerman

Main PCB with high & low voltage cut off suiable for 4 KVA/ 5 KVA voltage stablizers in repairs of any make complete all as specified and as directed by Engineer-in-Charge. ( Make:- Blue birds/ Hitech)

S&F ( in repairs) 2 Metre long copper conductor cable 3 core PVC insulated and sheathed 80 / 0.20 ( 2.5 sqmm)size duly fitted with 3 pin top, 20 Amps ( Cat No. 38637 of Anchor or any equivalent specified make complete all as specified and as directed by Engineer-in-Charge.

Power transformer suitable for Voltage stabilizer of make Blue Bird / Vinitec / Servel suitable for 4kVA/ 5kVA capacity stabilizer duly winded with suitable size super enamelled copper wire and testing in repairs complete all as specified and as directed by Engineer-in-Charge.

AC volt meter, square/round type, 0-300 volts suitable for 8 KVA / 4 KVA / 5 KVA / 0.5 KVA single phase voltage stablizer in repairs complete all as specified and as directed by Engineer-in-Charge.

Trigger transformer suitable for 4/5 KVA Voltage stabilizer of make Blue Bird / Vinitec / Servel duly winded with suitable size super enamelled copper wire and testing in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply only connector for in - out supply of voltage stablizer, 15 Amp with earth connection complete all as specified and as directed by Engineer-in-Charge.

Casing-caping flame ratardent (FR) PVC material size 25mm x 16mm, ivory color, unplasticised formulation for prolong storage or usage, double lock, ISI marked as per IS 14927, high durability, resistance to oil and grease with steel wooden screw of length 1.5/2 inches, (+) head, shank hole size-5/32, round washer head, PVC rim less wall plugs sleeves with antirotation lock for fixing of screws white colour made from high density non recycled polymer/ PVC complete all as specified and directed by Engineer-in-Charge.

All as per item No 91 above but size 38mm x 16mm

Horizontal boring and inserting casing pipe with fittings with material HDPE of pressure rating 6Kg/cm2 along road and under pavements/ hard standing/ road crossing in all types of soil at prescribed depth (in no case depth of the boring be less than 1.7 m from the road surface) upto 200 meters of drilling longitudinal or 3 to 4 roads crossing should be possible, for passing of LT cable of size 16/10/25 sqmm including all civil works and reinstatement as per BMP standards complete all as specified and directed. Note- If any dfamages to existing services such as OFC /gas pipe line/ electric cable etc shall be repaired immediately by the contractor. rate quoted above deemed to be included.)

S S CONSTRUCTION

M/s Acme Engineers and Contractors

M/s Vatsh Raj and co

M/S S.B. Singh and Sons

PUMA POWER