Loading
Loading…
Loading…
Tender ID
Tender Value
Refer Docs
Closing Date
20 Mar 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
73
1 condition
FOR TENDER VALUE ABOVE 1 LAKH:- IN CASE YOU ARE MSE AND WANT TO AVAIL BENEFITS AVAILABLE THEREOF, THEN PLEASE UPLOADTHE REQUISITE DOCUMENTS ALONGWITH THE TENDER . IF YOU ARE NOT A MSE OR A CONSORTIA OF MSES FORMED BY NSIC, PLEASE INDICATE PERCENTAGE OF SUB CONTRACTS IN EXECUTION OF THIS TENDER THAT WILL BE FROM MICRO AND SMALL ENTERPRISE IN PERCENT OF ORDER VALUE WITH FURTHER BREAKUP OF MSE OWNED BY SC/ST. INFORMATION WILL BE PROVIDED IN PERCENT TERMS WITH 6 FILEDS MICRO OWNED BY SC, MICRO OWNED BY ST, MICRO OWNED BY OTHERS, SMALL INDUSTRY OWNED BY SC, SMALL INDUSTRY OWNED BY ST, SMALL INDUSTRY OWNED BY OTHERS.
16 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
CONSIGNEE
TDS Clause: Indian Railways, as recipient of goods and services, shall deduct TDS at the rate of 2% of the value of supplies w.e.f 08.1.2018 where the total value of the contract exceeds Rs 2,50,000 /-, in terms of section 51 of CGST act 2017 & section 20 of IGST act of 2017 as notified by CBIC notification no 50/2018/central tax dated 13.09.2018.
Delivery Period : The delivery period in Store Procurement cases shall be reckoned from the date of issue of Advance PO/Letter of Advance Acceptance/Letter of Acceptance.
EMD and SD Not Applicable
1 location across Maharashtra · 8 Numbers total
Gauge
73255690A~CR
73255690A
Open - Indigenous
Goods
Maharashtra
₹0
Exempted
20 Mar 2026
6 Mar 2026
4 items · 8 Numbers total
Gauge for Draft Key Slot Width - 38 mm, Required size: NOGO-40.0 mm (Flat Type) Ref. Drg. No. RDSO SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with C alibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab [ Warranty Period: 30 Mont hs after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Trainset material management, Wadibunder, CR | Maharashtra | 2.00 Numbers |
| Total | 2 Numbers | |
Gauge for 62 mm Dia Pin Hole of Draw Hook. Required size - NOGO - 65.0 mm (Flat Type) Ref .Drg. No. RDSO SK 79062 Alt-05 & 99007 Material Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab [ Warranty Period: 30 Mon ths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Trainset material management, Wadibunder, CR | Maharashtra | 2.00 Numbers |
| Total | 2 Numbers | |
Gauge for Bottom Side of Shank - 56 mm Height Draw Hook, Required size: NOGO - 41.0 mm (Snap Type) Ref. Drg. No. RDSO SK 79062 Alt-05 & 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab [ Warrant y Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Trainset material management, Wadibunder, CR | Maharashtra | 2.00 Numbers |
| Total | 2 Numbers | |
Gauge for Shank Body 39 mm, Required size: NOGO-36.0 mm (Snap Type) Ref. Drg. No. RDS O SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibratio n Certificate Valid for min. 01 Year issued from NABL Approved Lab [ Warranty Period: 30 Months after th e date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Trainset material management, Wadibunder, CR | Maharashtra | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
4069009.pdf
ATTACHMENT
4069043.pdf
ATTACHMENT
5515399.pdf
ATTACHMENT
5515401.pdf
ATTACHMENT
5515402.pdf
ATTACHMENT
5531229.pdf
ATTACHMENT
5515404.pdf
ATTACHMENT
5515405.pdf
ATTACHMENT
5515411.pdf
ATTACHMENT
5515413.pdf
ATTACHMENT
5515415.pdf
ATTACHMENT
5515403.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .