TENDER FOR ITEM RATE CONTRACT FOR COMPLETION OF INCOMPLETE/ LEFY OVER WORK FOR PSPECIAL REPAIRS/ REPLACEMENT OF LT PANEL AT VARIOUS LOCATIONS UNDER GE(U) E/M MEERUT CANTT.

Amount

Supplying, installing, commissioing and testing of LT switchgear panel board IP-55 (indoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 400 Amps copper bus bars , cubical , factory made out of 2mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 75mmx75mmx6mm with 400mm long extended legs grouting in PCC plateform , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front and back openable doors with proper locking arrangements for dust and vermin proof ,complete including suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable comprising of the followings and specified hereafter:- MCCB 4 pole, 250 Amps, 415V, microprocessor release suitable for isolation, adjustable overload from 0.4-1.0 In adjustable short circuit from 2-12 , 35 KA, -01 No (incoming)

MCCB 3 pole, 125 Amps, 415V, 25KA, FMU )thermal magnetic) release, Adjustable overload 80 to 100% , fixed short circuit -03 Nos Out going, Digital type ampere meter 0-200 Amps, with CT ( for each Phase) square type -01 No, Digital type Votmeter 0-500 volts suare type -01 No LED type indication lamps ( R-Y-B) with holder panel mounting type complete all as specified -01 No, Motor protection compact unit device complete suitable for 50 HP VT pump with single phase protection, High/Low voltage protection, Phase reversal protection, Over load protection, Star delta starter suitable for 50 HP VT pump ( with sheet metal enclosure) sets-02 Nos, 25 sqmm single core copper conductor cable 6 run of suitable length not less than 1.50m each run connected from starter to Motor all as directed.

Supplying, installing, commissioing and testing of LT switchgear panel board IP-55 (indoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 200 Amps copper bus bars , cubical , factory made out of 2mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 75mmx75mmx6mm with 400mm long extended legs grouting in PCC plateform , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front and back openable doors with proper locking arrangements for dust and vermin proof ,complete including suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable comprising of the followings and specified hereafter:-

MCCB 4 pole, 125 Amps, 415V, 25 kA, FMU( thermal magnetic) release, adjustable overload 80% to 100%, fixed short circuit , -01 No.(incoming), MCB TP, 63 Amps, 415V, -02 Nos Out going, MCB TP, 40 Amps, 415V, -02 Nos Out going, Digital type ampere meter 0-200 Amps, with CT ( for each Phase) square type -01 No, Digital type Votmeter 0-500 volts square type -01 No,LED type indication lamps ( R-Y-B) with holder panel mounting type complete all as specified. -01 No, Motor protection compact unit device complete suitable for 10 HP -02 Nos. And 7.5 HP -02 Nos with single phase protection, High/Low voltage protection, Phase reversal protection, Over load protection, Star delta starter suitable for 10 HP pump set -02 Nos( with sheet metal enclosure), Star delta starter suitable for 7.5HP pump set -02 Nos( with sheet metal enclosure), 16 sqmm single core copper conductor cable 6 run of suitable length not less than 1.50m each run connected from starter to Motor all as directed.

Supplying, installing, commissioing and testing of LT switchgear panel board IP-55 (indoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 100 Amps copper bus bars , cubical , factory made out of 2mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 25mmx25mmx6mm with 400mm long extended legs grouting in PCC plateform , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front openable doors with proper locking arrangements for dust and vermin proof ,complete including suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable comprising of the followings and specified hereafter:-

MCCB 4 pole, 63 Amps, 415V, 25 kA, thermal magnetic) release, adjustable overload 80% to 100%, fixed short circuit , -01 No.(incoming),Digital type ampere meter 0-100 Amps, with CT ( for each Phase) square type -01 No,Digital type Votmeter 0-500 volts suare type -01 No,LED type indication lamps ( R-Y-B) with holder panel mounting type complete all as specified. -01 No,Motor protection compact unit device complete suitable for 5HP -01 No with single phase protection, High/Low voltage protection, Phase reversal protection, Over load protection,DOL starter suitable for 5 HP pump set -01 No ( with sheet metal enclosure),6 sqmm single core copper conductor cable 6 run of suitable length not less than 1.50m each run connected from starter to Motor all as directed.

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 25 x 4 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'medium grade' as water pipe from earth chamber to upper edge of earth plate, GI funnel with wire mesh fixed on water pipe and PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with XPM weighing not less than 4 Kg/sqm with 6mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

janta tradrers

Shikha Enterprises

M/S MANOJ ARORA

KUKREJA BROTHERS