COMPREHENSIVE REPAIR WKS OF B/R AND E/M LIKE JOINERY, PLUMBING, FLOORING, PLASTERING, LEAKAGE/SEEPAGE, WELCOME MAINT ALONGWITH REPAIR/REPLACEMENT OF E/M WKS WITH CONNECTED ACCESSORIES IN ZONE C OF NOFRA INCL OTM ACCN UNDER AGE B/R-I AT NS KARANJA

Amount

Supply and Fix in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 15mm angle cock with flange cast copper alloy, chromium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge.

Supply and Fix in repair 15mm dia stop cock fancy type cast copper alloy chromium plated, concealed type with long shank with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.

Supply and Fix in repair Brass Chromium plated wall ,sink, WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe in sink/ wall mixer etc, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in covers for PVC overhead water tanks of 500 to 2000 litres capacity (as per sample), complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs Jumper brass with rubber or leather washer for 15 mm dia bib cock / stop cock brass, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs spindle brass for 15 mm dia CP Bib cock/ stop cock/pillar cock/ Mixer (any type)/concealed cock of any pattern, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs stainless steel kitchen plate rack of size 600x600 and 1 mm thick (18 gauge) , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair waste coupling 40 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair PVC connections 15 mm size with brass nuts both side of length 450 mm, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair PVC waste pipe 32 to 40 mm for WHB/Sink up to floor trap and fixed, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs brass chromium plated overhead shower 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 25 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Rotational moulded polyethylene 500 litres capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float & dismantling of old water tank , complete all as specified and directed by Engr-in-Charge.

Supply and Fix Rotational moulded polyethylene 1000 litres capacity water storage tank(Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float & dismantling of old water tank , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair aluminium anodised towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer in Charge.

Supply and Fix in repair MS Rat tail pattern/ helical doors spring 150 to 200mm, ordinary springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, joint in cement mortar and taking out from floors or walls complete all as specified and directed by Engineer in Charge

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, joint in cement mortar and taking out from floors or walls complete all as specified and directed by Engineer in Charge

Supply and Fix 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls , complete all as specified and directed by Engr-in-Charge.

Supply and Fix 75 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 110 mm dia, PVC bend, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius, complete all as specified and directed by Engr-in-Charge.

Supply and Fix PVC (SWR) branch piece single (single 'Y') equal or unequal 110mm bore, complete all as specified and directed by Engr-in-Charge.

Supply and Fix PVC (SWR) branch piece double (double 'Y') equal or unequal 110mm bore, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 75 mm dia, PVC bend, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 75mm bore PVC (SWR) junction single, (single T) equal or unequal any radius, complete all as specified and directed by Engr-in-Charge.

Supply and Fix PVC (SWR) branch piece single (single 'Y') equal or unequal 75mm bore, complete all as specified and directed by Engr-in-Charge.

Supply and Fix PVC (SWR) branch piece double (double 'Y') equal or unequal 75mm bore, complete all as specified and directed by Engr-in-Charge.

Taking up or down 15/16mm dia CPVC/KITEC/GI Tubing and connection including, cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge.

Taking up or down 20mm dia CPVC/KITEC/GI Tubing and connection including, cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge.

Taking up or down 40/50mm dia CPVC/KITEC/GI Tubing and connection including, cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 15mm bore mild steel galvanized tubing medium grade with all fittings fixed to walls including work to be done up to 10th floor in short piece/length, including breaking the existing wall for replacement of corroded GI pipe in/on the wall and making good the disturbed surface to match previous structure with complete all as specified and directed by Engineer in Charge.

Supply and Fix 20mm bore mild steel galvanized tubing medium grade with all fittings such as nipple, union, socket, elbow, bends, etc fixed to walls including work to be done up to 10th floor in short piece/length, including breaking the existing wall for replacement of corroded GI pipe in/on the wall and making good the disturbed surface to match previous structure with complete all as specified and directed by Engineer in Charge.

Supply and Fix 50mm bore mild steel galvanized tubing medium grade with all fittings such as nipple, union, socket, elbow, bends, etc fixed to walls including work to be done up to 10th floor in short piece/length, including breaking the existing wall for replacement of corroded GI pipe in/on the wall and making good the disturbed surface to match previous structure with complete all as specified and directed by Engineer in Charge.

Supplying and fixing of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with al fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

Supplying and fixing of 20mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

Supplying and fixing of 16mm dia KITEC composite PIPE for 10kg/cm2 with all fittings to concealed connection walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

Supply and Fix in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low/high level, white/coloured with inlet ball valve, float and handle including brackets, etc, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair vitreous China squatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs vitreous china wash down water closet pan pedestal pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromium plated hinging and 'P' or 'S' trap device, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Chromium plated soap dish including fixing arrangement complete all as specified and directed by Engr-in-charge.

Material and Labour in repairs CI Floor trap long neck 75 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4, complete all as specified and directed by Engr-in-Charge.

Material and Labour in repairs CI Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4, complete all as specified and directed by Engr-in-Charge.

Material and Labour in repairs CI Nahani trap long neck 100 mm dia, including jointing to waste pipe fixed in cement concrete type B1, 1:2:4, complete all as specified and directed by Engr-in-Charge.

Material and Labour in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair PTMT cabinet with mirror of size 600x450mm x124mm, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs150 mm dia round/square grating of CP with or without hole including Jointed to PVC pipe , complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames including shutter (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed by Engr-in-Charge.

-Ditto- all as per item No 59.00 here-in-before but exc 1.50 Sqm and not exc 4 Sqm.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening including easing, adjusting etc, all as specified & directed by Engr-in-Charge.

Supply and Fix Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply and Fix Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply and Fix Aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainless steel screw not less than 50mm and @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section ( 28mm x 19mm x 2mm thick)around the opening, complete all as specified and directed by Engr-in-Charge.

Material and Labour 2nd class hardwood, Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).

Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).

Supply and Fix 200mm long and 10-15mm dia MS fasteners, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 35mm thick 2nd class Hardwood plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces, complete all as specified and directed by Engr-in-Charge. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated.

Supply and Fix 35mm thick 2nd class Hardwood, glazed and skeleton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered surrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a), complete all as specified and directed by Engr-in-Charge.

Supply and Fix Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opening as per specification and drawing etc, complete all as specified and directed by Engr-in-Charge.

Supply and Fix MS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs MS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 150mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 150mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 200mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs 200mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Preparation of old wooden surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint , complete all as specified and directed by Engr-in-Charge.

Supply and Fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.

Supply and Fix MS hold fast similar small articles confirming to Fe 290 Gde -E- 165, complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge.

Material and Labour for 4 mm thick, plain sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

Material and Labour 4 mm thick, plain sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

Supply and Fix figured glass 3mm thick pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Curtain rails Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer in Charge.

Supply and Fix in repair 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws to timber frame work , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws to timber frame work , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repairs, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 20mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. Note: stainless steel butt hinges and necessary SS screws shall be paid separately.

Supply and Fix in repairs, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 12mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary SSscrews shall be paid separately.

Supply and Fix in repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 150 mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed by Engineer in Charge.

Supply and Fix in repair 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

Petty repair to toilet floor, bathroom, kitchen, etc seepage including sunken portion treatment with water proofing compound including repair to floor trap, nahani trap , grating etc, complete all as specified and directed by Engr-in-Charge.

Petty repair to wooden door, PVC door, cupboard door, wardrobe door with shutter (size not more than 2sqm) including roller, windows, etc with minor repair and easing and adjustment/alignment to openable with accessories if required any ( like roller of cupboard door, butt hinge, handle, tower bolt, beading, bow handle, etc complete) , complete all as specified and directed by Engr-in-Charge.

Petty repairs to leakage of bib taps, pillar cock, stop cock, PVC connection, waste pipes, float valves, angle valve, concealed valve, GI union joints of pipe, re-fixing of bottle trap, etc. by changing the PVC washers/Sheet washers, spindle or any other minor accessories etc, complete all as specified and directed by Engr-in-Charge.

Petty repair to high or low level flushing cistern by adjusting the float valve, leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush, complete all as specified and directed by Engr-in-Charge.

Petty repair to wall mixer, basin mixer, sink mixer etc including spindle, rubber washer etc, complete all as specified and directed by Engr-in-Charge.

Petty repair to internal/external water inlet water pipe line including socket, elbow, nipple ,with repair to water blockage , pipe line leakage including concealed water tubing etc of any height using scaffolding, complete all as specified and directed by Engr-in-Charge.

Material and Labour for new or old surfaces of exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clan water & allow to dry. Fill visible cracks/ joints by crack seal caulking compound (chemistik or equivalent) & allow to dry for 24 hours. Apply a primer coat of water base primer (chemistik prime M Seal or equivalent)) and allow to dry for 6 hours. Thereafter apply 02 coats of WB high build anti carbonating coating cum waterproofing (chemistik PDS-50 or equivalent) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc, complete all as specified and directed by Engr-in-Charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Non Skid ceramic coloured tiles7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.018 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment match the colour of tiles with and including 20mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Vitrified Ceramic tiles (dark shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in CM 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Vitrified Ceramic tiles (dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat in CM 1:3 to receive tiles, complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed by Engr-in-Charge.

Material and Labour for 20 mm thick polymer modified ready mix cement based plaster on external surfaces including mix with WPC @ 3% by weight of cement, complete all as specified and directed by Engr-in-Charge.

Material and Labour for 5 mm thick ready mixed cement base plaster on concrete surfaces of ceiling, complete all as specified and directed by Engr-in-Charge.

Material and Labour 8 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces, complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls, complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment of walls plastered or unplastered, washing, rubbing down and stopping of painted surfaces etc, complete all as specified and directed by Engr-in-Charge.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of newly or untreated plastered surface applying two coats of oil bound distemper (OBD) over a coat primer, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair rubber beading suitable for fixing 4 mm/5mm thick glass in aluminium window/doors. etc, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair star lock for window including all necessary fittings, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair aluminium windows bearing per windows, complete all as specified and directed by Engr-in-Charge.

Material and Labour for injection chemical GLYPHOSPHATE (4% Concentration) of 20 mL or till refusal by making cut / injection in the stem of plant of roots at 30 mm and spraying with solution 25 mL GLYPHOSPHATE (4% concentration diluted with 1 litre of water) and removing the Plant / vegetation including penetrated roots complete including necessary scaffolding etc for plants / vegetation of any size of girth complete all as specified and directed for buildings upto and including any height, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of 04 pieces pulley operated cloths drying system consisting of aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 metre with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hiderope Channel to be dia of minimum weight of pipe shall not be less than 0.20kg/Rm and maximum weight of pipe in one unit not less than 2 kg weight of rope shall be not less than the 550 gms/ metres including taking down old unserviceable cloth hanger, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Water proofing treatment to sunken floor of RCC slab, complete all as specified and directed by Engr-in-Charge, as per following steps :-

(a) After cleaning the surface applying a coat of cement slurry @ 3kg/sqm over 20mm thick cement plaster in 1:4 with WPC @ 2% by weight of cement on bottom/sides of RCC.( WPC to be measured and paid separately)

(b) Applying first coat of chemical pidifin 2K (DR Fixit or equivalent) on cleaned plastered surfaces @ 0.86 kg/sqm (min) as recommended by manufacturers. Then Provide a layer of glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as manufacturer's recommendations. Thereafter Apply second coat of chemical pidifin 2K (DR Fixit or equivalent) @ 0.86 kg/sqm (min) layer glass fibre mesh as recommended by manufacturers.

(c) Spouts of 40mm dia GI pipes light grade projecting at least by 150mm clear of face of the outer wall.

(d) 30 mm thick PCC 1:2:4 type C1 using 20mm graded stone aggregate mixed with WPC @ 3% by weight of cement shall be provided on bottom.

(e) After laying of CI connections apply two coats of hot bitumen Blown 85/25 grade to concrete surfaces @ 1.5 kg/sqm/coat over vertical sides and floor of sunken portion.

(f) The sunken portion shall be filled with PCC 1:7:12 type F2 using 40mm brick aggregate after carrying out required test for joints/water proofing. Note :- The treatment shall also be provided over side wall upto a height of 150 mm above FFL

Supply only integral water proofing compound, complete all as specified and directed by Engr-in-Charge.

Material and Labour for 40 mm thick, Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate)as in floors finished even and smooth using extra cement, complete all as specified and directed by Engr-in-Charge.

Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris to a distance exc 1.0 km, complete all as specified and directed by Engr-in-Charge. Note :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work.

Material and Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with waters to remove dusts etc, complete all as specified and directed by Engr-in-Charge.

Brushing neat cement slurry with 3kg/sqm, complete all as specified and directed by Engr-in-Charge.

Material and Labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in concrete padding laid to required slope including finishing the concrete surface fair and even without using extra cement, complete all as specified and directed by Engr-in-Charge.

Material and Labour for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC 3% by weight of total cement, complete all as specified and directed by Engr-in-Charge. Note :- Integral WPC shall be measured and paid separately.

Material and Labour for Applying oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface, complete all as specified and directed by Engr-in-Charge.

Material and Labour for APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method, complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces, complete all as specified and directed by Engr-in-Charge.

Material and Labour for torching on joints (not exc 10cm) of old APP membrane sheet including cleaning, brushing at joints and necessary repairs (including suitable/items T&P/Gas cylinder) as required, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair two -in- one tap cast copper alloy chromium plated fancy type, CP with long shank & cup (concealed type), cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enamelled steel conduit/PVC conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets,, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, complete all as specified and directed by Engr-in-Charge.

Material and Labour point wiring with 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in casing caping of 25 mm wide, with double locking type, ISI marked including all accessories casing caping as approved by Engr-in-charge, with PVC 1.5 mm multi stranded insulated unsheathed FRLSH copper wire, ISI marked of green colour for continuous earth, including sunken box made out of suitable thickness and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted including 3mm hylam /masonite sheet cover, for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer, complete all as specified and directed by Engr-in-Charge, for one light point or one fan point controlled by one switch. Note : Wiring to be done as per approved colour code.

-Ditto - all as per item No 149.00 here-in-before but for one light point controlled by 2 way switch SP, 5 Amp, 240 Volts

-Ditto - all as per item No 149.00 here-in-before but one 5 amp socket point on same board

-Ditto - all as per item No 149.00 here-in-before but one 5 amp multi socket independent

-Ditto - all as per item No 149.00 here-in-before, but using 2.5 sqmm ( nominal area) multistranded FRLSH copper conductor cable/wire & 2.5 sqmm size PVC insulated unsheathed copper conductor cable for earth continuity ( green colour) for one 5 pin socket outlet 5 / 15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed by Engr-in-Charge.

-Ditto- all as per item No 149.00 here-in-before, but using 4 sqmm (nominal area) FRLSH multistranded copper conductor cable/wire for one 5/15 Amp socket point controlled by 15 Amp switch, SP one way 240 Volts & Socket, complete all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano type flush button type single pole one way 5 Amps 240V front operated, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 A and 15 Amp flush type universal , complete all as specified and directed by Engr-in-Charge.

Supply and Fix socket 3 pin, 5 A flush type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell buzzer 240V 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell push 240V 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/relacement switch piano flush button single pole one way, 6 Amp (ISI marked), complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement Switch socket outlet 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Socket outlet 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Switch bell push flush type 5 Amp (ISI marked) complete all as specified and directed Engineer-in-Charge.

Supply and Fix in repair/replacement Switch socket combination outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Switch flush button, single pole two way, 6 Amp (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Socket type EME fan 5 step regulator switch/socket type for ceiling fan of suitable size, complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Lamp holder/angle holder insulated body with black/white plate for batten fittings, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular step type fan regulator 120 watt ,AC, 220V, 50 Hz , ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular switch 1 module, 6 amp, one way, ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular switch 1 module, 16 amp, one way, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular socket 2 module universal type 5/6 amp, one way, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular socket 2 module universal type 6/16 amp, one way, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular bell push 6A, 1 module, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement Bell buzzer, ding dong AC,230V, 50 Hz single pole , complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular cover plates with frame up From 1 /2 to 3 module as per site requirements, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular cover plates with frame up from 4 to 12 module as per site requirements, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular metal flush box as per site requirements from 1/2 to 3 modules, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular metal flush box as per site requirements from 4 to 12 modules , complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/ suitable size , ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surfaces/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surface/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surface/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in complete, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 2.5 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 20mm dia/casing capping/suitable size , ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 2.5 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surfaces/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 2.5 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 2.5 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for cutting of wall/ceiling/column for laying submain of any size including plastering ,white wash, complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED building security light fitting with suitable size bracket/angle with three core flexible wire to fit security light of 45 W, IP 66 protection LED, complete all as specified and directed by Engr-in-Charge.

Supply and fix LED batten with 20/22W LED tube light in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 12 way double door open able, including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 8 way double door open able, including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way ,including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 2 way including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 16 way including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series), complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement MCB SPN 32 AMP DP 240 V 10 KA (C-Series) , complete all as specified and directed by Engr-in-Charge.

Supply and fix repair/replacement LED Bulk head fittings 9/10W luminaire including LED light driver holder 220 V, AC,50HZ connecting up with three core flexible copper conductor cable of suitable size complete with all accessories, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement LED tube rod 20 watt, 220V, AC, 50 Hz change with existing any tube rod including flexible wire and connected accessories, complete all as specified and directed by Engr-in-Charge.

Supply and Fixix in repair/replacement Batten MS suitable for 18/22/24W LED rod 220V,AC,50HZ with accessories including suitable 1.5 sqmm 2 core wire for connecting with ceiling rose, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED batten 10W, 2 feet with LED tube light 220V, AC, 50 Hz in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc, complete all as specified and directed by Engr-in-Charge.

Supply and Fixin repair/replacement MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fixin repair/replacement MCCB 4 pole, thermal magnetic release range 125 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Material and Labour for daily complaint checking & repairing of DBs/meter panel board/circuits/submain wiring/switches/sockets etc and other connected work including rectification of faults, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement MCCB 4 pole, thermal magnetic release range 63 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement MCCB 4 pole, thermal magnetic release range 40 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement three pin top of capacity 15 amp, AC, 220V, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement PCRD plug of capacity 15 amp, AC, 220V, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 10x10cm, concealed / surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 15x7.5cm, concealed / surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 20x15cm, concealed / surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 20x25cm, concealed / surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement emergency bulb LED 10W, 230V, 50Hz, with 2/4 hour backup, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement RCCBs 63 Amps double pole 100mA breaking capacity, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement RCCBs 40 Amps double pole 100mA breaking capacity, complete all as specified and directed by Engr-in-Charge.

Supply and fix repair/replacement decorative light suitable for holder B-22/E-27, complete all as specified and directed by Engr-in-Charge.

Material and Labour for taking out and refixing of tube light, mirror light etc after cleaning and any type of rectifying defect, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED batten with 20/22W LED tube light (four feet) with sensor in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED batten with 9/10 W LED tube light two feet mirror type with sensor in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED batten with 20W LED tube light (four feet) with inverter type with 2 hrs backup in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED bulb of 9/10 watt , complete all as specified and directed by Engr-in-Charge.

Material and Labour for servicing and cleaning of geyser of any capacity including taking out from existing position and refixing, complete all as specified and directed by Engr-in-Charge.

Material and Labour for checking ceiling fan of size 1200/1400mm and change defective part cotter pin/ nut bolt etc, complete all as specified and directed by Engr-in-Charge.

Supply and fix flexible copper wire 2 core of suitable size including taking down, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement fan rod of size 1/1.5 feet suitable for mounting ceiling fan of size 1200/1400 mm, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular type AC box with three pin socket and plug top and 20 amp single pole MCB, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement two way sheet metal enclosure with three pin socket and plug top and 20 amp single pole MCB, complete all as specified and directed by Engr-in-Charge.

M.K Enterprises (BID ID -3349594)

SAI ENTERPRISES (BID ID -3350867)

M/s Vishwakarma Enterprises (BID ID -3350794)

EVEREST CONSTRUCTION (BID ID -3350959)

DIGITAL SERVICES (BID ID -3351160)

D.N.PATIL (BID ID -3348785)

M/s PIONEER CONTRACTORS (BID ID -3351452)