Loading
Loading…
Loading…
Tender Value
₹50.0 L
EMD Value
₹99,980
Closing Date
14 Sept 2026, 6:00 pm
GE (AF) ADAMPUR
GE (AF) ADAMPUR
REPAIR / MAINT AND SERVICING OF EOT/ HOT CRANES/ LIFTS INSTALLED IN VARIOUS LOCATIONS AT AF STN ADAMPUR
2026_MES_785850_1
GE(AF)/ADM/T-43 OF 2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
UNDER GE (AF) ADAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) ADAMPUR
₹99,980
Yes
22 Aug 2026
22 Aug 2026
16 Sept 2026
22 Aug 2026
14 Sept 2026
7 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1M&L for Servicing of over head travelling crane complete including checking / tightening of all nut , bolt & breaks any type any size complete system, adjusting etc of all breaks motions and VFD adjustment setting as per load testing run of flame proof / non flame proof/ normal type EOT / HOT cranes with having single or double girder type and providing greasing & oiling of traveling / moving parts of crane with connecting motor girder parts for movement of crane hoist / long / cross traveling and including maintaining the controlling of speed / creeping micro speed of motors with minor maint / repair electrically operated main control panel wire with connecting control wiring system consisting of main switch, step down transformer, contactor, HRC fuse, VFD, PLR, control pendent ,wire rope with break drum unit, gear box unit , oil levels, motor bed / foot ,electrical control cable, motor terminal, end cable carriage trolly , motor shaft, bush flange bearing with lathe work ,chain pulley block, ratchet clutch, gear block, chain wheel, chain etc and including locating the defect or fault and rectification of the fault and rectification of oil leakage etc any type any size and replacement of defected nut, bolt & washer and making it soundless/sound proof and after trails testing run of crane for smooth functioning / operation satisfactorily complete for the following capacity as per relevant IS Code :- | |||||
| 1.01 | EOT crane of capacity 1/2 Ton | 30 | Each Job | - | - |
| 1.02 | EOT crane of capacity 3 Ton | 3 | Each Job | - | - |
| 1.03 | EOT crane of capacity 5 Ton | 12 | Each Job | - | - |
| 1.04 | EOT crane of capacity 10 Ton | 2 | Each Job | - | - |
| 1.05 | HOT crane of capacity 2 Ton | 11 | Each Job | - | - |
| 1.07 | (f) Checking of electric motor connections, insulation resistance value.
(g) Checking wire rope for any damage & greasing the rope.
(h) Adjustment of the rotary limit switch.
(j) Checking of bearing of the hook and greasing the same.
(iv) ELECTRICAL PANEL
(a) Checking the contactors for overheating or flashing.
(b) General checking of contacts and connections.
(c) Cleaning of control panels and checking of connections.
(d) Checking of connections of VFD drives/other drive, calibrating VFD drive and PLC to get smooth movement & maximum efficiency / other drives for smooth functioning of the same.
(e) checking the serviceability of cable including power/control cable, checking the serviceability of cable carrier/cable trolleys ,adjusting as possible to get maximum free for movement of moving part/ Aprons of EOT cranes
(v) DOWN SHOP LEAD
(a) Checking the alignment and rectification.
(b) Cleaning of the moving/sliding objects.
(vi) GROUND MOTION CONTROL PANEL
(a) Checking function ability of motion push buttons, function lock key operated switch, "ON &OFF" , lamps.
(vii) Periodic inspection/servicing shall be carried out by authorized service engineers/ agencies, without any disturbance of movement/ operation schedule of bldgs as approved by GE.
(viii) Major materials shall be measured and paid separately under relevant items of schedule 'A'. | - | - | - | - |
| 2M&L for Load testing of over head travelling crane of HOT / EOT crane as per manufacturer norm for safe working rating load including arrangement of load measurement unit with link steel wire rope and required suitable load for testing duly varying the load upto 125% of the rated capacity load of crane including transporting to testing load at different location and also providing load test certificate in triplicate duly signed by inspector of crane complete for the following capacity :- | |||||
| 2.01 | HOT crane of capacity 2 Ton | 11 | Each Job | - | - |
| 2.02 | EOT crane of capacity 1/2 Ton | 30 | Each Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
tender.pdf
Tender Documents • 0.72 MB
BOQ_880616.xls
BOQ • 1.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].