Works contract for East Division

Amount

Excavation of Pole/Stay Pit

Excavation of pole pit upto 27' (8.0 m) Pole by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Hard rock without blasting (where houses are located)

Stay pit 4.5' to 5' depth by using JCB or manual

Erection of poles.

PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

PSC/ RCC poles/Metal poles above 8.00m by using JCB or manual

Metal supports above 9.00m/ RSJ/ Rail pole/ Fabricated poles/ Tubular pole by using JCB or manual

Erection of stay set complete

Transport of Poles road side to pole pit including loading and unloading

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100m

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)

Below 8 Kms (Plains)

Above 8 Kms. For additional Km (Irrespective of weight in tonnage)

Loading and unloading of poles:

Loading of poles upto 8.0 M/ 27

Unloading of poles upto 8.0 M/27

Loading of poles above 8.0 M

Unloading of Poles above 8.0 M

Loading of metal poles (All sizes)

Unloading of metal poles (All sizes)

Loading of materials

Unloading of materials

Leading and stacking of materials

Fixing of Cross Arms

HT "V" cross arms (all types) / Channel cross arms/ Guarding Cross arms

Double Channel X-arm

Guarding Cross arm

LT 3 phase cross arms

LT Single phase cross arms

HT/LT TI Fittings

Fixing of Aluminium Knob

Fixing of HT pin Insulators 22 KV

Fixing of HT 11 KV strain disc.

Fixing of HT 22 KV strain disc

Fixing of LT pin Insulator

Fixing of LT shackle

Paving of Conductor, stringing etc., complete with ACSR/ AAAC for both HT/LT lines.

ACSR 7/4.09 mm Raccoon conductor

ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

ACSR 7/2.59 mm / AAAC 2.50 mm weasel and ACSR 7/2.11 mm Conductor

Guarding arrangements:

Flat guarding including fixing of 2 Nos. cross arms

HT Guarding

Concreting of poles:

Mass concreting including materials (Cement + River sand/ M sand and Blue metals and watering)

Sleeve concreting including materials (Cement + River Sand/ M sand and Blue metals and watering)

Earthing of pole with coil earthing including burying looping and binding

Painting

Painting of metal poles including cross arms (excluding cost of paint)

Numbering of pole with paint and with base painting.

Painting of Transformer (Double coat)

Erection of Transformer

Loading of Transformer upto 100 KVA

Unloading of Transformer upto 100 KVA

Loading of Transformer above 100 and upto 200 KVA

Unloading of Transformer above 100 and upto 200 KVA

Loading of Transformer above 200 KVA

unloading of Transformer above 200 KVA

Erection of New Transformer all capacities (with jumpering)

Replacement of failed Transformers all capacities (with jumpering)

Erection of HT Metering set

Loading of HT Metering set

Unloading of HT Metering set

Lathe Works

Labour charges for alteration of Back Clamps/ Stay Clamps to suit for the works

Drilling of hole in channel only 3/4" & 1"

Cutting of channel

Cutting of RSJ pole

RSJ pole welding

Re-sagging of HT/LT lines

Re-sagging ACSR 7/4.09 mm Raccoon conductor

Re-sagging ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

Re-sagging ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor

Releasing of ACSR/AAAC conductors from conductor drum and coiling 7/2.59, AAAC 7/2.50, ACSR 7/3.35, 7/3.15 MM

Service Erected:

Erection of street light including fixure fitting

Erection of street light service

Fixing of new SV/MV lamp fittings

Agricultural service fixing

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

Releasing of 3 phase service and (above 50 HP) re-fixing.

Releasing of grills from RCC Poles

Tree cutting works

Cutting of coconut leaves (per tree)

Clearing of branches of trees

DT/ DP erection

Erection of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer)

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)

Erection of D.P. structure with AB switch, top channel, cross bracing, earthing, painting, providing stay including concreting

Dismandling of Line Materials

Dismandling of Transformer structure Complete

Dismantling of Single pole Transformer Structure complete

Dismantling of D.P Structure complete

Dismandling of pole from pole pit (9.0m and above)

Dismandling of pole from pole pit (7.5mtr & 8mtr)

Dismandling of pole (9.0m and above)

Dismandling of pole (7.5mtr & 8mtr)

Dismandling of HT 22 KV Pin Insulator

Dismandling of HT TI Fitting

Dismandling of11 KV disc

Dismandling of 22 KV disc

Dismandling of 3 PH X arm

Dismandling of Tapping X arm, V X arm & Guarding X arm

Dismandling of 1 PH X arm

Dismandling of Alu Knob

Dismandling of LT pin Insulator

Dismandling of LT Shackle Insulator

Stay set complete dismandling

Dismandling of 7/4.09 mm ACSR conductor

Dismandling of 7/3.35 mm ACSR conductor

Dismandling of 7/2.59 & 7/2.11 mmACSR conductor

Dismantling of Guarding

Dismantling of St light fitting

Dismantling of st light SC

G.S.T. @18% should be Entered by the Bidder