Nanjangudu taluk Nagarle village panchayat building Continuation work

Nanjangudu taluk Nagarle village panchayat building Continuation work

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia

mild steel bars at 20 cms. c to c both horizontally and vertically fixed with

chicken mesh for drop chajja,facia, backing to cup ...

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,

with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and sid...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing in position fully panelled Honne wood shutters for

doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per drawing...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the directions of...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to openi...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:

6 fine sand) including rounding off corners wherever required smooth

rendering, providing and removing scaffolding, including cost of m...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Providing and fixing suitable plaster mesh 100mm wide manufactured

out of hot dipped galvanised iron of nominal thickness 0.35mm with a

zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, lai...

Providing and laying flamed finish Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle gre...

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including

water thinnable priming coat with cement primer after th...

Applying One Coat of Water thinnable cement primer of approved brand and manufacture on wall surfaces Water thinnable cement primer to give an even Shade after thoroughly brooming the surfaces to remo...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, ...

Providing Flush/ Ruled pointing: Pointing on stone work with cement

mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining,

including cost of materials, labour, curing as per s...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :Two coats on new

work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Lettering with black Japan paint of approved brand and manufacture to give

an even shade including preparing the surface after thoroughly cleaning the

surface to remove all dirt, dust and foreign matt...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished

with necessary screws etc. 125x65x2.12mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel

type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992

with necessary screws etc. complete : 125mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock

with 6 levers and a pair of lever handles of approved quality with necessary

screws etc. complete.

Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP...

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually c...

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing brass bib cock of approved quality :15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal for wash basin

completely recessed at the back for the reception of pipes and fittings.

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : 15 mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet...