Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC C O RANJIT ELECTRICAL KEATING ROAD SHILLONG 793001 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793001 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹47.2 L+₹27,029.95 (0.58%)Rejected-Finance NO 29 CANTONMENT NEAR ANJALI CINEMA HALL SHILLONG 793001 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹49.4 L+₹2.4 L (5.21%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹49.6 L+₹2.6 L (5.51%)Rejected-Finance MAWBLEI MADANRTING SHILLONG 793 021 MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793021 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹51.5 L+₹4.6 L (9.73%)Rejected-Finance C O GUPTA EMPORIUM AR BAZAR HAPPY VALLEY SHILLONG 793 004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
1 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
SPL REPAIR TO BLDG NO. A 178 OF OR GOVT MD ACCN AT HAPPY VALLEY UNDER GE SHILLONG
2024_MES_651346_1
8759/SHL/E8
Open Tender
Civil Works
Item Rate
270 days
Shillong
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Shillong
₹1.1 L
Yes
6 Nov 2024
27 Apr 2024
3 Jun 2024
27 Apr 2024
1 Jun 2024
18 May 2024
Amount
Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.
Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed.
S&F of MS flat iron such as small articles for hold fast and similar work all as specified and as directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) for fixing hold fast complete all as specified and directed.
S&F of 2nd class hard wood plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F of 35 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed.
S&F of 2nd class hard wood 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.
Supply and fixing 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No ) complete all as specified and directed.
M&L for 4.80 mm thick sheet glass ordinary quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed
M&L for preparation of new steel surface exc 10cm width or girth and applying of two coat of synthetic enamel paint over one coat of red oxide primer all as specified and directed.
M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregates) as in Foundation filling and mass concrete complete all as specified and directed.
M & L for 75mm thick PCC 1:4:8 type D2 as in path complete all as specified and directed.
Supply and fixing 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed.
Supply and fixing 200mm size MS barrel tower bolt stove enamelled black with bright bolt ISI marked complete all as specified and directed.
Supply and fixing 150mm size MS pressed handle oval type stove enameled black complete all as specified and directed.
Supply and fixing 250mm long MS sliding door bolt, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of six bolts & nuts, four on bolt & two on staple,ISI marked, complete all as specified and directed.
Supply and fixing 100mm size MS barrel tower bolt stove enamelled black with bright bolt ISI marked complete all as specified and directed.
Supply and fixing 100mm size MS pressed handle oval type stove enameled black complete all as specified and directed.
S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm long cover plate complete all as specified and directed.
S & F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples comlete all as specified and as directed.
M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling, including dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of unframed work complete all as specified and as directed.
M&L for 2nd class hard wood plain fillets bull nosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc 6 sq cm & n exc 13 sq cm complete all as specified and as directed.
M&L for 2nd class hard wood plain fillets bull nosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc 3 Sq cm and n exc 6 sq cm complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for forming jambs, etc. to openings in cement mortar 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.
Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed.
M & for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in including 15mm thick rendering in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the same old concrete slab by picking, sweeping clean and washing down with water to remove dust etc.and applying cement slurry @3kg/Sqm. (ii) Screed bed or bedding layer 15 mm thick in cement mortar 1:4 on roof slab by mixing of WPC and surface finished fare and smooth without using extra cement. (Note: WPC shall be measured and paid for under relevent items) (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.
Taking down GI tubing 15mm bore and connection including removing to store complete all as specified and directed.
Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealing in wall all as specified and directed. Note: cutting chases and making good shall be measured and paid seperately under relevent item.
Refixing only 15mm bore tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed. Note: Serviceable pipe obtained from item No. 37.00
M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete.
Taking down GI tubing 20mm bore and connection including removing to store complete all as specified and directed.
Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.
Refixing only 20mm bore tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed. Note: Serviceable pipe obtained from item No. 41.00
Taking down GI tubing 25mm bore and connection including removing to store complete all as specified and directed.
Supply and fix 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete all as specified and directed.
S&F in repair 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
S&F in repair CP single lever wall mixer with provision of over hear shower complete with 115 mm long bend pipe connecting legs & wall flange complete all as specified and directed.
S&F in repair CP lever sink Mixer with swinging spout on upper side (wall mounted model) with connected legs & wall flanges complete all as specified and directed.
S & F in repair 15 mm bore CP fancy type bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repair 15 mm bore CP fancy type 2 in 1 bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed.
S&F in repair Powder coated fancy type Anodised aluminium alloy curtain rod 25mm dia including PVC rings @ 100mm c/c with suitable brackets matching to curtain rod of make as approved by GE complete all as specified and as directed. Note:Additional supporting bracket shall be provided if length is exceeding 1.2m and quoted rate shall be deemed to be included for the same.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs vitreous china wash down water down water closet pan (pedestal pattern- P trap), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.
S & F in repairs Vitreous china wash hand basin, white, flat back of size 450 mm x 300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32 mm dia and PVC connection 15mm size 450 mm length with PTMT nuts, complete all as specified and as directed.
Supply and fix in repair 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F in repairs 600 mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and as directed.
S&F of stainless steel kitchen rack of size 36”x 36”x 10” complete all as specified and directed.
S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.
S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.
S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
S&F in repairs PVC (SWR) bend with access door of 110mm bore complete all as specified and directed.
S&F in repairs PVC (SWR) bend with access door of 75mm bore complete all as specified and directed.
S&F in repair PVC (SWR) 110mm dia junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F in repair PVC (SWR) 75mm dia junction single, (Single T) equal or unequal complete all as specified and as directed.
S & F in repair 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S & F 500 litres capacity rotational molded, polythene (white colour), tripple layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including dismantling of old complete all as specified and as directed.
S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed.
S&F aluminium guide rail two track having two PVC wheel 50 mm dia for smooth functioning of cupboard/door shutter approx length 1.60 mtr complete all as specified and directed.
S&F compacted recessed handle of size 150 mm suitable for sliding door complete all as specified and directed.
M&L for Pre cast RCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid sepratly.
M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Demolition of reinforced cement Concrete (RCC chimney/cover slabs) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
S&F 2nd class hard wood boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling old boarding of any description complete all as specified and as directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries out side of MOD land all specified and directed.
M&L for rendering 10 mm thick on concrete surface in cement mortar (1:4) as backing coat and 5 mm thick in CM 1:4 using finishing the surface even and smooth without using extra cement, including mixing water proofing compound as per manufacturer instruction complete all as specified and as directed. Note:- WPC will be measured & Paid separately
M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.
M & L for rendering 5 mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed .
Supply only water proofing compound complete all as specified and directed.
M&L for preparation of new plastered external surfaces of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer,complete all as specified and directed.
M & L for preparation of new plastered/concrete surfaces of walls and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable primer complete all as specified and directed.
M & L for preparation of new plastered/concrete surfaces of ceiling and apply three coats of white wash on the surfaces of ceiling complete all as specified and directed.
M&L for complete removal of existing treatment from external surface of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer,complete all as specified and directed
M&L for Complete removal of existing treatment and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable primer complete all as specified and as directed.
M & L for preparation of old decorated surfaces (plastered or unplastered) and applying two coats of white wash on the surfaces of ceiling complete all as specified and directed.
M&L for Precast PCC (1:3:6) type C1 (using 20mm graded stone aggregates) solid block masonry exc 10cm in width or girth and setting in CM (1:6) including demolition of Precast cement concrete block walling in any position and including removal of debries out side of MoD land complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) in ground floors or sunken floors and pavings n exc 15 cm thickness (below or above ground level or sunken floors) complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in plinth protection/ path incl finishing even & smooth with using extra cement complete all as specified and directed.
M&L for PCC 1:5:10 (using 40mm graded stone aggregates) as in sunken floor incl finishing even & smooth with using extra cement complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in surface channels and drain complete all as specified and as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
S&F of stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed.
S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed.
S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed by Engr-in-charge
S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed.
S&F ball bearing drawer channel (soft close) of size 600 mm long complete all as sspecified and as directed.
S&F clip on cabinet hinge(auto close) complete all as specified and directed.
Dismantling of boarding any description fixed in any position with nails complete all as specified and directed
S & F of 12mm thick Block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame complete all as specified and as directed.
S&F of 18/19 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber frame complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified
S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed
S&F 75mm Brass handles, cast type, polished bright all as specified and directed
S&F in repairs Soap dish holder stainless steel complete all as specified and directed
S&F in repairs Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union CP over head shower of size 125mm of approved make with CP shower arm for wall mounted showers flange complete all as specified and directed.
S&F in repairs corner glass shelf with bracket complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.
M&L Glazed ceramic colour tiles of size 350 x 250 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.
M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.
M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, dado , skirting and riser etc, set and jointed in cement slurry and pointed in white or colour cement to match with shade of tiles over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed
M& L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20 mm thick screed bed in CM 1:3 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M& L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10 mm thick backing coat in CM 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigments cement and pigments and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.
S & F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.
Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm dia PVC conduit concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild galvanised sunken box/metal flush box made out of 1.6 mm thick galvanised sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including accessories including cutting chases and making good the disturbed surfaces in cement mortar 1:3 and painting complete to match with the existing for one light point controlled by one switch complete all as specified and directed.
All as per item No.124.00 above but One 3 pin 5 Amps socket out let points on independent board
All as per item No.124.00 above but 5 Amp socket on same board with other switches.
All as per item No.124.00 above but One call Bell point controlled by one bell Push on independent Board
Material and labour for point wiring for one light point controlled by one, Two way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC conduit and fittings of medium grade fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
Material and labour for point wiring for power point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVCconduit and fittings of medium grade fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
Material and labour for submain wiring for DBs/ Power Point, two single core ,4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 4sqmm cable+ 1 run of PVC conduit+ 1 run of 4sqmm earth cable shall be measured as one unit.
Material and labour for submain wiring for DBs/ Power Point, two single core ,2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 2.5sqmm cable+ 1 run of PVC conduit+ 1 run of 2.5sqmm earth cable shall be measured as one unit.
Supply and fixing modular switch 1 way 6 A, 1 module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular bell push 1 way 6 A, 1 module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular switch 2 way 6 A, 1 module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.
Supply and fixing modular switch socket sockets 6A 2/3 pin combined 3 module 230/250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.
Supply and fixing modular switch sockets 6/16A 6 pin combined 3 module 230/250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.
S & F Modular cover plate with frame & flush box of 8 modules complete all as specified and directed.
S & F Modular cover plate with frame & flush box of 6 modules, complete all as specified and directed.
S & F Modular cover plate with frame & flush box of 4 modules, complete all as specified and directed.
S & F Modular cover plate with frame& flush box of 3 modules, complete all as specified and directed.
S & F Modular cover plate with frame & flush box of 2 modules, complete all as specified and directed.
Supply & fix ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
Supply and fix Bell push, flush type, 5 amp complete all as specified and directed.
Supply and fix Call Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed.
Supply and fix in repair Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size including taking down old unserviceable one complete all as directed.
Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F Wall bracket decorative LED / Bulk head Light fitting with lamp 10 Watt with necessary connection complete all as specified and directed.
Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.
Supply and fix Distribution board double door MCB TPN 4 way with IP 43 multiphase outgoing suitable for mounting 63 Amps MCB as incomer with Bus bars, Neutral links complete with all accessories including taking down old unserviceable complete all as directed.
Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down old unserviceable complete all as directed.
Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed.
Supply and fix MCB SPN 40 - 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection all as specified and directed.
Supply and fix MCB TPN 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection all as specified and directed.
Supply and fix exhaust fan, steel body, AC, single Phase, 230V of size 300mm sweep with, blades, frame and louvers complete all as specified and directed.
Supply and fix 20 Amps SPN MCB metallic Plug and socket sheet metal enclosure complete all as specified and directed.
Supply and fix Water heater storage type, electric,capacity 25 litres BEE 5 star rated complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in soft/loose all complete as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m in depth and getting out in soft/loose all complete as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and as directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement all as specified and directed.
Supply and fixing/laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable including taking down old unserviceable one complete all as specified and as directed.
Material and labour for sand cushioning with coarse dry sand for underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete as specified and as directed. Note :- Only punned down sand shall be measured and paid.
M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core iincluding laying in trench or fixed on wall through clamps complete all as specified and as directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate No. 3 of SSR Part I complete all as specified and directed.
M/S Surendra Prasad and Associates
Ms Amrik Singh Bahra
S.M ENGINEERING AND CONSTRUCTION
M/S UTTAM SAHA
Shekhar Trading Co.
S K Construction
shivam constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .