REPAIR AND POLISHING OF WOODEN FURNITURE AND RECANNING OF DIFFERENT TYPE OF CHAIRS AND FIXING OF PLY TOP AT VARIOUS AIR FORCE STN UNDER BSO OF GE AF GURGAON

Amount

Chair Dining FD 279 & 1105 Repair to chair Dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below. The entire chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks. All other work as specified and as directed by Engineer - in - Charge.

Front Leg

Rear Leg

Stiffner

Stiffner H type

Side and back rail with drill canning hole suitable for 2mm thick cane

Recaning of chair dining with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed

Bed Hard Ply Top ( Drg No FD-246) Repair to Bed hard ply top with repairs/replacement of the following components and the bed shall be set right and the entire bed shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Removing unserviceable plywood from outer sides of Head rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Head Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Removing unserviceable plywood from inner sides of Head rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Head Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Removing unserviceable plywood from outer sides of Foot rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Foot Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Removing unserviceable plywood from inner sides of Foot rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Foot Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Replacement of top ply:- Removing unserviceable ply top from Bed Hard Top and S&F of new ply wood top shall be 12mm thick BWR Grade commercial face veneers on both side fixed with screws complete all as shown on drg and complete all as specified and as directed. Make: Greenply Duro or Archid with ISI Marked.

Replacement of legs Taking out unserviceable legs from Bed Hard and S&F new leg made out of 1st class hard wood teak as per existing shape and size as shown on drg complete all as specified and as directed

Replacement of Long Rails: Taking out unserviceable/broken long rails from Bed Hard and S&F new long rail as per existing shape and size made out of well seasoned teak wood free from knot and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed

Replacement of stiffner : Taking out broken stiffner and S&F new stiffner made out of teak wood as per existing shape, design and size all as shown on drg complete all as specified and as directed

Table 900x600x760mm with out drawer (Drg No. FD-223 & 284) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 75x75mm teak wood triangular corner between rails and legs. The entire table shall be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class sheesham wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long of first class sheesham wood, as per Drg.

Taking out UNSV short rail, supply and fixing of new top short rail of first class sheesham wood, as per Drg.

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class sheesham wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table Dining 6 Persons (Drg No. FD-273 & 239) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 100mmx100mm teak wood triangular corner between rails and legs. The entire table shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top of table dining 6 pers, supply and fixing of new top of pre-laminated particle board 18mm exterior grade with 4mm thick teak wood beading all round as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table dressing Ladies (Drg No. FD-251) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and entire table shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned below shall be measured and paid separately.

Taking out unserviceable top table dressing Ladies and supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable bottom of table dressing Ladies, supply and fixing of new bottom made out of 18/19 mm block board commercial BWR. Type exterior gde as per Drg.

Taking out unserviceable legs of talbe dressing ladies, supply and fixing of new legs made out of first class teak wood.

Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom with knob 25mm. Bottom shall be 6mm ply wood commercial. Front portion of drawer shall be made out of pre-laminated particle board 18mm with anodize copper plated knob.

Supply of looking mirror 5mm thick superior quality make saint Gobin/Modigaurd with teak wood frame and ply wook 6mm thick commercial quality on back complete as per Drg.

Taking out UNSV/broken sliding glass, Supply and fixing of new sliding glass shutter 5mm thick dully rounded edges complete as per Drg.

Taking out UNSV aluminium channel, Supply and fixing of new aluminium channel as per Drg.

Taking out back side plywood and Supply and fixing of new ply wood commercial 12 mm as per Drg.

Table Center (Drg No. FD-274 & 235) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and the entire table shoud be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with Emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned below shall be measured and paid separately.

Taking out unserviceable top of table centre, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Teapoy (Drg No. FD-278&232) Repair to teapoy including dismantling of old broken parts and replace with new parts as mentioned below. Teapoy shall be repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry pape. Rest all as directed by Engr-in-charge. Note : New parts as mentioned here in after shall be measured and paid separately as supply only.

Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board 18mm exterior grade with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Peg Table (Drg No. FD-235) Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable stiffener , supply and fixing of new stiffener complete of first class hard wood teak as per Drg

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

The entire peg table shall be polished with French polish after replacement of above components.

Table writing (Drg No. FD-275) Taking out unserviceable top of table writing, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable drawer, supply and fixing of new drawer of deodar wood except bottom. Which shall be of 6mm ply wood commercial. Front portion of drawer shall be of teak wood with anodize knob.

Taking out unserviceable cub board of table writing, supply and fixing of new cub board with shutter as per Drg.

Taking out unserviceable shutter, supply and fixing of new shutter of table writing made of pre-laminated particle board exterior grade 18mm as per grade.

Taking out unserviceable stiffener, supply and fixing of new stiffener complete of first class teak wood as per Drg.

Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as per approved by Engr-in-Chage.

The entire table shall be pollshed with French polish after replacement of above components.

Hat Stand Taking out unserviceable looking mirror of hat stand , supply and fixing of new mirror electro copper plated 5mm thick.

Taking out unserviceable peg of hat stand , supply and fixing of new peg CP brass 120x75mm as per Drg.

The entire hat stand shoud be polished with French polish after replacement of above components .

Table dining 1200x900mm (Drg No.FD/MAP-II/03) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. The entire table shall be repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top , supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Chair computer FD/E6/MAP/01 Taking out unserviceable seat and back of chair computer, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with teapastry cloth as approved by Engr-in-charge complete all as specified and as directed.

Removing old unserviceable coaster wheel and S&F new coaster wheels of chair computer complete all as specified and as directed.

Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed.

Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Table bed side Drg No. FD/E6/MAP/15 ( R) Taking out unserviceable top of table bed side, supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable left/right sides of table bed side, supply and fixing of new right/left side of table bed side made out of pre-laminated particle board 18mm exterior grade.

Taking out unserviceable bottom of table bed side, supply and fixing of new bottom of made out of pre-laminated particle board 18mm exterior grade.

Taking out unserviceable partition of table bed side, supply and fixing of new partition of 6mm ply wood cpmmrcial as per Drg.

Taking out unserviceable handles of table bed side, supply and fixing of new handles superior quality as approved by Engr-in-charge.

Sofa Set 5 Seater (Drg No FD/E6/MAP-II/02, FD-373 and FD-281) Repair to sofa sets including dismantling of old back and seat cushions and replace with new back and seat cushions. 'Cool' Foam of 100mm thick 40 density shall be fixed on back and seat covered with tapestry cloth of superior quality as approved by GE, cost shall not be less than Rs 200/- per mtr. The size of the 'Cool' foam seat and back shall be 530mmx500mm of make Sleepwell or Kurlon. Wooden frame of sofa set shall be set right and polished after repair in original teak shade. The under mentioned unserviceable/broken parts/components of the Sofa set shall be taking out and supply and fixing new parts/components made out of well seasoned teak wood free from knots and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed. Note : One Sofa set 5 Seater means One 03 Seater & 2 Single Seater One Set Cushion denotes 10 Pieces of Cushion (5 backs & 5 Seats)

Long rail

Short rail

Rear leg

Handle/Arms

Chair Easy FD-229 Repair to chair easy including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. The entire chair shall be polished with French polish in original shade after properly removing the old existing polish and smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed.

Front Leg

Rear leg

Stiffner

Side/back rail with duly drill holes for 2 mm caning

Recaning of chair easy with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed

Dressing mirror FD/E6/MAP/16 Repair to dressing mirror including dismantling of old broken parts and replace with new parts as mentioned below. Dressing mirror shall be set right and repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry paper.Rest all as directed by Engr-in-charge.

Taking out unserviceable mirror, supply and fixing of new Electro copper plated mirror 5.5mm thick with teak wood frame as per Drg.

Chair Writing FD-280 Repair to chair Writing including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and selling right all other existing parts. The entire chair shall be polished with French polish in original shade after properly removing the old exisiting polish and smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed.

Front Leg

Rear leg

Stiffner

Side/back rail

Recaning of chair writing with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed

Chair revolving with arms with cushion seat & back (TP/Godrej) Taking out unserviceable seat and back of chair revolving, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with teapastry cloth as approved by GE complete all as specified and as directed.

Removing old unserviceable coaster wheel and S&F new coaster wheels of chair revolving complete all as specified and as directed.

Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed.

Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Chair visitor with arms with cushion seat & back(TP/MAP) Taking out unserviceable seat and back of chair Un-revolving with arm, supply and fixing of new seat and back 50mm thick foam cushion for seat, 25mm thick foam cushion for back covered with teapastry cloth as approved by GE complete all as specified and as directed.

Removing of unserviceable rubber shoes of Chairs, supply and fixing of new rubber shoes as per Drg complete all as specified and as directed.

Preparation of old painted surface of chair and apply one coat of synthetic enamel paint Black including denting and welding complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Table 900x600x760mm with drawer (Drg No.FD-224 & 283) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. The entire table shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top of table 900x600x760mm with drawer, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long of first class teak wood, as per Drg.

Taking out UNSV short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom which shall be of 6mm ply wood commercial. Front portion of drawer shall be of teak wood

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table 900x900mmx760mm W/O drawer Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry paper.

Taking out unserviceable top , supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top rail, supply and fixing of new top rail of first class teak wood, as per Drg.

Table Dining 8 Persons (Drg No. FD-273) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 100mmx100mm teak wood triangular corner between rails and legs. The entire table shall be set right and polished with French polish in original teak shade after properly preparation of surface by removing existing polish and applying putty and smoothened with emery paper.

Taking out unserviceable top of table dining 8 pers, supply and fixing of new top of pre-laminated particle board 18mm exterior grade with 4mm thick teak wood beading all round as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Table dressing Gents (Drg No.FD-230) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry paper.Rest all as directed by Engr-in-charge. Note : New parts as mentioned here in after shall be measured and paid separately as supply only.

Taking out unserviceable top table dressing gents and supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable left/right sides of talbe dressing gents, supply and fixing of new right/left side made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable bottom of talbe dressing gents, supply and fixing of new bottom made out of 19 mm block board commercial BWR. Type exterior gde as per Drg.

Taking out unserviceable mirror with frame, supply and fixing of new Electro copper plated mirror 5mm thick with teak wood frame as per Drg.

Taking of UNSV drawer, supply and fixing of new drawer made out of deodar wood except bottom and front. Bottom shall be of 6mm ply wood commercial. Front portion of drawer shall be made out of pre-laminated particle board 18mm with anodize copper plated knob

Taking out back ply and supply and fixing of new ply wood commercial 12mm (BWR) as per Drg.

Polishing of following wooden furniture with french polish (after removing existing polish and making good surface by scraping/cleaning) till glossy finish of best quality to the entire satisfaction of Engr-in-Charge

Bench Workshop wooden all type

Bed ply top

Book Case LP

Chair dining

Chair Easy

Chair Writing

Hat Stand with mirror

Peg Table

Sofa set 5 seater

Sofa set Single Seater

Table Centre

Table Dining for 6 pers

Table writing

Table 900x600mm with and without drawer (FD-284/283)

Table 900x900mm

Table 1200x900mm

Teapoy wooden

Rifle Rack

Stool Dressing CB

Table One Piece All Purpose

Table Bed Side

Foam without Back Wooden

Techno India Enterprises