Improvement such as widening and strengthening of Nahaka Bypass chhak to NH-215 near Kanheipur via Chandama Hingula road (ODR) from 0/000 km. to 2/767 km. in the district of Jajpur under State Plan

Dismantling of prestressed / Reinforecd Cement Concrete Grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.

Fine dressing and providing, laying turfing with live sods of perennial turf forming grass on embankment slope, verges or other locations including preparation of ground, fetching of sods with all lifts and leads upto 5 Km. and watering complete in all respect as per approved drawing and technical specifications as per Section 900 and Clause 307 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Clearing grubbing road land including uprooting rank vegetation grass bushes shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to used etc complete as per specification and direction of Engineer in charge

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers trimming bottom and side slopes in accordance with requirement of lines grades and cross section and transporting to the embankment location within all lead and lifts upto 1000m. etc. complete as per specification and direction of Engineer-in-charge

Loosening, leveling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm. mixed with water of OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction and clause 305 of MORT&H specification for Road & Bridge works(5th Revision) etc complete as directed by the Engineer in charge

Construction of embankment with approved material obtained from roadway cutting with all lifts and leads, transporting to site by mechanical means within a lead of 5 km. spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MORT&H specifications for Road & Bridge works(5th Revision).

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 km. spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MORT&H specifications for Road & Bridge works(5th Revision).

Providing compacted shoulder with granular materials by using moorum and sand admixture(60:40) of approved quality, watering and compacting the required density in OMC with PRR as per approved drawing and technical specification as per Section 900 and Clause 407 of MoRT&H Specification for Road & Bridge works (5th Revision) and as per direction of Engineer-in-Charge

Construction of granular sub-base by providing close graded Granular sub-base Grading-VI materials as per table 400-I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MORT&H Specification for Road & Bridge works ( 5th Revision).

Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MORT&H specification for Road and Bridge works(5th Revision).

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surfce and spraying primer @ 0.6kg. per sqm.using mechanical broom as per Clause 502 of MORT&H Specification for Road & Bridge works (5th Revision.)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.2kg. per sqm.on prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MORT&H Specification for Road & Bridge works (5th Revision.)

Providing & laying 50 mm thick av. compacted Bituminous Macadam (Grading-II) using VG-30 Bitumen with Hot Mix Plant using crusher broken hard granite aggregates of specified grading premixed with bituminous binder @ 3.3 % by weight of total mix and filler, transporting the hot mix to works site, lying with Hydrostatic Paver Finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compacting as per Clause No. 504 and section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5thRevision)

Providing and laying 25 mm thick av. compacted Semi Dense Bituminous Concrete (Grading-II) using VG-30 grade Bitumen and crusher broken hard granite aggregates of specified grading, premixed with bituminous binder @ 5.0 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paverfinisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause No.501, 508 and section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision)

Providing and fixing 15cm dia and 1.00 mtr long guard post of cement concrete (1:2:4) with hard granite chips including cost of steel reinforcement for finished item of work including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Providing & fixing RCC M-15 in Hectometer stone, 5th Km. stone and Ordinary Km. stone etc along with reinforcement complete as per drawing as per IRC -25 / 1967 & IRC-8-1980 fixed in position including finishing and lettering, painting and technical specification as per Clause No. 804 & 806 and Section 1000, 1500, 1600, 1700, 2300 of Specification for Road & Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge. 110 cm long Oridinary Kilometre stone

115 cm long orinary 5th Km stone

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes

Providing and errecting direction and place identification retro reflective sign as per IRC 67 made of high intensity grade sheeting as per clause no 801.3 fixed over aluminium sheeting, 2m thick with area exceeding 0.9sqm supported on a mild steel angle Iron post 75x75x6mm , 2nos firmly fixed to the ground by means of properly designed foundation with M15 grade of concrete 45x45x60cm below ground level as per approved drawing. i) Informatory signs (1800x1200 mm)(above 0.90 sqm)

90cm equilateral triangle

90 cm x45cm rectangular

90 cm x30cm rectangular

90 cm octagon

60 cm x 50 cm

Sand filling in Road work & CD works etc as per approved drawing and technical specifications as per Clause 304 and Section 900 of MORT&H Specifications for Road & Bridge works (5th Revision) complete in all respect & as per direction of the Engineer-in-Charge

P C C- M15 in foundation with 40 mm size C.B. Metal of approved quality as per approved drawing and direction of the Engineer-in-charge including cost, conveyance, royality taxes of all materials conforming to the MORTH techanical specification. (Toe wall base)

P.C.C. M-20 grade in sub-structure using 40 mm size C.B. Metal of approved quality as per approved drawing and direction of the Engineer-in-charge including cost, conveyance, royality taxes of all materials conforming to the MORTH techanical specification. (Toe wall)

RCC M-20 grade using 20mm down graded chips in foundation of drain as per approved drawing and direction of the Engineer-in-charge including cost, conveyance, royality taxes of all materials conforming to the MORTH techanical specification.- Drain Base

Drain wall

Drain cover slab

Providing RCC M-25 grade Reinforced Cement Concrete in Foundation & Raft for CD works using 20mm down graded chips including cost, conveyance of all materials, all labour and T&P etc. complete as per direction and specification of Engineer-in-charge complete.

Providing RCC M-25 grade Reinforced Cement Concrete in Sub-structure for CD works using 20mm down graded chips including cost, conveyance of all materials, all labour and T&P etc. complete as per direction and specification of Engineer-in-charge complete.

Providing RCC M-25 grade Reinforced Cement Concrete in Superstructure/ deck slab for CD works using 20mm down graded chips including cost, conveyance of all materials, all labour and T&P etc. complete as per direction and specification of Engineer-in-charge complete.

Providing RCC M-30 grade Reinforced Cement Concrete using 20mm down graded chips in wearing coat including steel for CD works including cost, conveyance of all materials, all labour and T&P etc. complete as per direction and specification of Engineer-in-charge complete.

Provision of an Reinforced cement concrete crash barrier at the edges of the bridge and approaches to bridge structures, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineerand as per Technical Specifications section 809 of MORTH specification for Road & Bridge works (5th revision).

Supplying, cutting, bending, binding, straightening, placing HYSD bars confirming to grade IS:1786-(Fe-500) for steel reinforcement works for finished item of work as per approved drawing and technical specifications complete in all respect as per section 900,1000 & 1600 of MoRT&H specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Providing weep holes in Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specification.

Metal spall backing in the rear side of abutment and wing walls using 5cm size hard granite metal including cost, conveyance, royalty, taxes of materials, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge

Providing and laying of Filter media with stone crushed aggregates of 45mm size satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification as directed by the Engineer in charge

Gravel backing to approns and revetments with good quality moorum/sand and moorum admixture satisfying Liquid limit below 25 and P.I.value within 6 as per approved drawing with cost,conveyance,royalty,taxes of all materials ,all labours, T&P sundries complete as per specification and direction of Engineer-in-Charge

Supplying, fabricating welded water tight drainage spout as per technical specification clause 2705 of specification road and bridge work MORT&H (5th revision) assembly to dimensions shown on drawing of dia not less than 100mm with galvanized steel conforming to IS 226 & fixing in position with suitable fixtures at specified locations on bridge decks including painting two coats with bituminous paint sealed with sealant as per IS 1834 around the spout to the deck slab including full compensation to all operations, all inclusive costs, contingencies, incidental involved for the finished defect free item of work complete as per the specification & direction of the Engineer in charge

Rough stone dry packing in aprons and revetments, stone pitching in slopes and boulder apron etc with hard stone of size 30 cm and above and weighing not less than 40Kg as per approved drawing and Section 900, 1000 & 2500 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm to the bridge superstructure as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge

Please Enable Macros to View BoQ information