Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Schedule | Awardee / L1 Bidder | Status | Bids | Value |
|---|---|---|---|---|---|
| 1 | Schedule 1 | VKE VALVES INDUSTRIES PVT LTDLikely | RA Ended | 1 | ₹48,026 |
| 2 | Schedule 2 | VKE VALVES INDUSTRIES PVT LTDLikely | RA Ended | 2 | ₹5.5 L |
| 3 | Schedule 3 | VKE VALVES INDUSTRIES PVT LTDLikely | RA Ended | 2 | ₹2.3 L |
| 4 | Schedule 4 | VKE VALVES INDUSTRIES PVT LTDLikely | RA Ended | 2 | ₹77,703 |
| 5 | Schedule 5 | VKE VALVES INDUSTRIES PVT LTDLikely | RA Ended | 2 | ₹72,983 |
Tender Value
₹15.9 L
EMD Value
Exempted
Closing Date
9 Jun 2026, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Safety relief valves
9364687
GEM/2026/B/7571783
Two Packet Bid
Safety Relief Valves of inlet and outlet size 15mm x 25 mm with set pressure 0.16 barg,Safety Relie
Chengalpattu, Tamil Nadu
Item wise evaluation
BOQ
1 document required · 1 mandatory
AGM,CMM, PFBR KALPAKKAM, Department of Atomic Energy, BHARATIYA NABHIKIYA VIDYUT NIGAM Limited, PMO, (K.viswanathan)
Exempted
Yes
15 Oct 2026
22 May 2026
9 Jun 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Safety Relief Valves of inlet and outlet size 15mm x 25 mm with set pressure 0.16 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 15mm x 25 mm with set pressure 0.16 barg suitable for gas temperature service of 150 deg C as per drawing attached as Annexure -1. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 2 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
| 2 | Safety Relief Valves of inlet and outlet size 80 mm x 100 mm with set pressure 4.5 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 80 mm x 100 mm with set pressure 4.5 barg suitable for gas temperature service of 350 deg C as per drawing attached as Annexure -2. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 2 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
| 3 | Safety Relief Valves of inlet and outlet size 25 mm x 32 mm with set pressure 6 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 25 mm x 32 mm with set pressure 6 barg suitable for gas temperature service of 350 deg C as per drawing attached as Annexure -3. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 4 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
| 4 | Safety Relief Valves of inlet and outlet size 25 mm x 50 mm with set pressure 16.5 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 25 mm x 50 mm with set pressure 16.5 barg suitable for gas temperature service of ambient condition as per drawing attached as Annexure -4. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 1 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
| 5 | Safety Relief Valves of inlet and outlet size 25 mm x 50 mm with set pressure 2.2 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 25 mm x 50 mm with set pressure 2.2 barg suitable for gas temperature service of ambient condition as per drawing attached as Annexure -5. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 1 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
| 6 | Safety Relief Valves of inlet and outlet size 50 mm x 50 mm with set pressure 2.2 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 50 mm x 50 mm with set pressure 2.2 barg suitable for gas temperature service of 450 deg C as per drawing attached as Annexure -6. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 1 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
| 7 | Safety Relief Valves of inlet and outlet size 100 mm x 100 mm with set pressure 0.22 barg | Supply and safe delivery of Safety Relief Valves of inlet and outlet size 100 mm x 100 mm with set pressure 0.22 barg suitable for gas temperature service of ambient condition as per drawing attached as Annexure -7. The valve design shall conform to ASME Section VIII Div.1 and API 520 Part I, with orifice area and center-to-face dimensions as per API 526. Flanged end connections shall be as per ASME B16.5 with specified ratings and raised face serrated finish as per drawing. Materials of construction shall be as per drawing. Each valve shall be factory set to the specified set pressure and tested. Seat leakage test shall be as per API 527, shell test as per ASME B16.34 and set pressure verification as per ASME Sec VIII Div.1. Hydrostatic test pressure shall meet specified requirements as per drawing. Dimensions and ratings shall match the drawing so as to fully interchangeable with existing installed SRV. Supply shall include approved GA drawing, valid material test certificates, pressure test reports, calibration certificate and complete compliance to drawing without deviation. | 1 | Nos | NR Sathiyavathi 603102,BHAVINIPFBR PLANT SITE KALPAKKAM | 90 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_9364687.pdf
GEM_BID • 0.17 MB
finalatc_2026-05-22-10-16-18_b521571ff204934d161143ee6bc1720c.pdf
BOQ • 3.64 MB
boq_item_sample_file_5037_2026-05-22-10-16-18_b134023c7a85d4558ea9f87bde412433.csv
BOQ • 0.01 MB
finalatc_fc13ad12-eb87-4770-aa2e1779425785328_pfbr_320.pdf
GEM_OTHER • 3.64 MB
gtc.pdf
GEM_OTHER • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .