CA NO CWE/PAT/T-24/2020-21 SPECIAL REPAIR TO BLDG NO P-97 TO P-100 OFFRS MD ACCN UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound all as specified & as directed by Engineer-in-Charge.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Make of Wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) .

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) .

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (APEX) / Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL) .

S&F factory made flush shutters 35mm thick, confoirming to IS : 2202 (part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters compete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate - 1 nos per leaf

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.

S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5 x 38.10 x 1.29mm for chowkats or frame & shutters made of size 44.45 x 44.45 x 1.29mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 Nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 Nos per leaf (d) Alm door closer hydraulically regulated, designated No 3 universal type, upto 1 m width of shutter - 01 No per leaf Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

M&L for Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria/Somany as approved by AO

Providing and Laying Premium (1st) quality straight edge, ceramic tiles 400x400x 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed. Make:- Johnson (Digital HD Tiles) (Barstow for Toilets & Verona for Kitchens) or equivalent from Kajaria/Somany as approved by AO

Providing and Laying Premium (1st) quality straight edge, plain square outdoor vitrified full body tiles with in 400x400x10 mm thick in floors etc. in approved shade/combination of light & dark, set & jointed in neat cement including and over 20mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed. Make : Johnson/Kajaria/Nitco/RAK/Somany as approved by AO

M&L for toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make - Jaguar Cat Part No ACN-1151N./Marc/Cera or equivalent as approved by AO.

S&F stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Sink :- Nirali or Diamond or Neelkanth or Prayag

Disconnecting existing tanks of any capacity from 350 to 500 Ltrs, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

S&F vitreous china premium/1st quality wash down water closet wall hung EWC with P trap white colour including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (EWC-Compact, Seat cover- Carona) or equivalent from Hindware (Slick) ,Parryware as approved by accepting Officer.

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Calina S3010102) or Hindware (Orissa Pan Eco) equivalent from Parryware

S&F vitreous china premium/1st quality wall hung wash basin white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Concealed Cistern-Cento, Flush Plate-Cento) / Cera (Concealed Cistern-Chevron Cat No. - B1110101, Flush Plate-Cat No. B1120101-H Type)

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed.

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. Make : Cera (Cat No. - F7020305, F7040103) or equivalent from Jaquar/Paryag/Hindware

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. Make : Jaquar/Cera/Hindware/Marc/Prima

S&F stainless steel tubing of 25 mm bore mild steel chromium plated 1.6 mm wall thickness as in curtain rod complete incl S&F 02 Nos brackets, stops including rings 7 nos per RM etc in repairsc all as specified & directed as in repair .

M&L for cutting down plants/trees/bushes of girth not exc 15 cm from roof tops/sides, externals walls of building, chajja wall junctions, junctions of rain water/ CI/ Soil waste/ Vent pipes including taking out roots entered into walls/slab surfaces, then spraying the affected area with solutions of 25 ml Glyphosphate (4% content) diluted with 1 ltr of water or as per manufacture's instructions & making good the surface using PCC (1:2:4), type BO or cement mortar 1:3 as per site requirement with necessary scaffolding/stagging etc. any height from ground level, complete all as specified & as directed by Engineer-in-Charge. Note :- 1. Any PVC pipes, brick works damaged during the execution of the work shall be replaced with new one to ensure leak/seepage free joint. 2. The width of such wk will be measured 0.50 sq.m extra beyond roots of the plants.

M&L for sunken floor treatment without disturbing the existing treatment by applying siliconate injection grouting using nozzles. The spacing of holes will be 2 Nos, holes in every 1.00m, using 12 to 15mm diameter drill bit, drill holes at an inclination of 45 degree to the extent of 1/2 to 3/4 the wall thickness & injecting in the lowset possible point almost touching the defective damp proofing course depending upon the severity of dampness and the materils used in the walls & in its construction. A hand pump sfficient to create pressure of approx 3kg/sqm must inject chemical through pressure grouting machine, inject the diluted liquid (1:4) by pumping till the point of return of liquid is felt (minimum 10 litres) & allow to remain for some time before moving to the next nozzle & observing the area for 24 hours including removing the extended/protruding nozzles & seal the holes with suitable compound. The treated areas should be washed thoroughly and followed by application of two coats of water based hygienic coat containing in entire scrapped area and including removing of old materials of any description, all as per manufecturer's instruction, making good the holes after treatment complete all as specified and directed. (Make : M/S Build Core, M/S Pidilite, M/S STP as approved by the GE)

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

S&F acrylic glass shelf 3 tier of radius not less than 30cm of lower rack with glass thickness 5.50mm with stainless steel railing best quality available in market and fixed to walls with plug and brass chromium plated screws complete all as specified and directed.

S&F acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes, comb, tooth paste etc and fixed to walls with plug and brass chromium plated screws complete all as specified and directed.

Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified. Note : The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make/Product: Sika Rustoff 100 or equivalent from Fosroc

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified. Note : The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make/Product: SikaTop®-Armatec-108 or equivalent from Fosroc

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified. Make : Prayag (BEA-30) or equivalent as approved.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajja etc with mechanical means/grinder complete all as specified and directed.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make : Sika/STP/Fosroc

Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. Note : The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Product: Sikadur®-32 LP or equivalent from Fosroc

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness. Yield: approx. 0.84 ltr/kg. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm Note : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Product: SikaTop®-122 HS or equivalent from Fosroc

S&F 18 mm thick LEAD FREE PVC Celuka ply of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO

S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Make : KAFF/Hettich

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make KAFF/Hettich

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified. Make : Harrison (Cat No 0812) or equivalent as approved by AO

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

M&L for dummy joints/construction joints 8mmx10mm as in PCC floors filled with polyurethane elastic adhesive/sealant (white/grey colour) of approx density 1.30kg/litre complete all as specified. Make : Sika flex

S&F LED bulb 7W all as per complete. Make : Havells / CG/Bajaj /Wipro.

Supply and fix in replacement of MCB SP 6 to 32 Amps complete all as specified and directed.

Supply and fix bell ding dong electronic complete all as specified and directed.

Hanging only ceiling fan after necessary point wiring complete all as specified and directed.

S&F electric meter digital type single phase complete all as specified and directed. Note : - Old deposited in MES Yard.

S & F tube light fitting LED type retrofit T-8, 20 Watt, 4 ft long including LED tube rod and including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S & F tube light fitting LED type integrated 9/10 watt, 2 ft long including LED tube rod and including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S&F bulk head fitting LED type Including 1 x 9/10 watt LED lamp, with flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S&F LED security light fitting 30-35 watt, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Buttar Construction Co.

Jagdish kumar aggarwal