Vikramaditya Marg sthit naya Upmantri Awas No. 2 me do snangreh / shauchalay ki pani ki supply ki jarjar avem jungyukt, pipeline badalna, va ek snangreh / shauchalay ki jangyukt fittings badalna, awas me store room ke paas deewar bana kar shade dalna

Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates, framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2,

Providing Corrugated G.S. Sheet roofing including Vertical/Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm dia meter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters and and trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DSR N0-12.1.1,

Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DAR.No-2.1.1,

Providing and laying in Position Cement Concrete of 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) Derived from natural Sources : 10 graded Stone aggregate 40 mm nomical size Derived from natural Sources ) DSR N0-4.1.10,

Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.1.1,

Provoding and Laying Damp Proof Course 40 mm thick with Cement concrete 1:2:4, ( 1 Cement, 2 Coarse Sand (Zone-lll) Derived from natural Sources : 4 graded Stone aggregate 12.5 mm nomical size Derived from natural Sources ) DAR N0-4.10,

Brick work with Common burnt clay F.P.S. (Non Modular ) bricks of Class designation 7.5 in Superstructure above plinth level up to floor V level in all shapes and size in Cement Mortar 1:4 Cement and Coarse sand in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.4.1,

12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1,

Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. DSR.N0-15.23.1

Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.40)

Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DSR-8.31),

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing cmplete with base of cement mortar 1: 4 (1cement : 4 coarse sand) DSR N0-11.26.1,

Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2, Rs-424.67)

Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threated fittings This includes joints of pipes & fitting with one step CPVC solvent cement and testing, refilling & testing of joints complete as per direction of Engineer -In-charge. External work -Exposed on wall (25 mm nominal dia pipe ) DSR No-18.9.3,

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter DSR No- 12.41.1,

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm Coupler DSR No-12.42.1.1,

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 87.5° Bend 75 mm Bend DSR No-12.42.5.1,

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 75 mm, DSR- 12.43.1,

Supply and Fixing of S.S. Jali 125 mm dia,

Supply and Fixing of PVC Nahani Trep,

Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLR-5053N, including supply of all material & labour and T & P etc. requird for proper completion of work.

Providing and Fixing of 15mm dia Florentine C.P. brass Bib Cock, (Straight line model) with wall Flange Jaguar Make Code N0-FLR-5047N, including supply of all material, labour, T&P etc. complete.

Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete.

Supply and Fixing of Florentine C.P. Brass Single Lever Basin Mixer without Pop-Up Waste System with 450 mm long braided hoses, Jaguar Make Code N0-FLR-5001B, including supply of all material, labour T&P etc. complete.

Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete.

Supply and fixing of CP hand Shower Ø95 mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete.

S/F of Maze Over head Shower Ø300 mm Round Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System with Shower Arm Ø20 mm & 600 mm long Round Shape with 90° Bend for wall mounted showers with stainless Steel Flange Jaguar make, Code No-OHS-CHR-1633+SHA-479L600 lncluding supply of all material & labour and T & P etc. requird for proper completion of work.

S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete.

Providing and fixing of Single Piece WC with UF Soft Close Slim Seat Cover Hinges, Fixing Accessories Set And Cistern Fittings, Size-370x670x720 mm. S Trap 220 mm Code N0-LYS-WHT-38851S220UFSMN, Jaquar make, including Cutting and making good the walls and floors wherever required.

Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 570X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar make with C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work.

S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731N, including supply of all material, labour, T&P etc. complete.

S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-39753PS, including supply of all material, labour, T&P etc. complete.

S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work.

S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work.

S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work.

Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete.

Supply and Fixing of Corner Glass Shelf (With Bracket) Jaguar make Code N0-ACN-1173, including supply of all material, labour, T&P etc. Complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31).

Providing and placing on terrace ( at all floor levels ) Polyethylene Water Storage Tank. IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank. DSR- 18.48) )

Providing and fixing gun metal gate valve with C.I heel of approved quality (screwed end) 20 mm dia nominal bore, (As DSR-18.17.1A)

Providing and fixing Ball valve brass of approved quality high or low pressure with plastic floats complet 20 mm nominal bore DSR- 18.18.2)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18,

Please Enable Macros to View BoQ information