1) Providing Minor repair works to AHS Parkalagandi (V) of Danmmapeta (M) in Bhadradri Kothagudem District, 2) Providing Minor repair works to Cheepurugudem (V) of Dammapeta (M) in Bhadradri Kothagudem District, 3) Providing Minor repair works to AGHS Ankampalem (V) of Dammapeta (M) of Bhadradri Kothagudem District

1) Providing repairs to AHS Parkalagandi of Dammapeta (M) in Bhadradri Kothagudem District

Earth work excavation for foundation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Foundation of Building.(APSS No. 308) (SBC-20t/Sqm)

Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402)excluding seignerage & GST charges for Floor Bed

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete excluding seignerage & GST charges for Footings.

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete excluding seignerage & GST charges for Plinth Beams.

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete excluding seignerage & GST charges for Columns.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Plastering to even surfaces of wall with CM (1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

white washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing th surface to remove all dirt andrmains of loose podered materials including cost of all materials like cement, metal. natural river sand and manufactured sand (Rock Sand) in the ratio of 50.50 and watet etc., complete exclduing seigniorage charges etc., complete for finished item of work

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Supply and Fixing of 18 Gauge MS Plain Sheet window Shutter of size 0.50 x 0.45 M with shutter angular frame of rolled steel equal angle ISA 2525 of size 25 x 25 x 4mm elded ith fixturs such as MS powder coatd toer bolts IS 204 100 mm long 1 Nos, MS Powder Coated Butt Hinges IS 205 100mm long 2nos including Red Oxide Paint of grade - I quality, sales and other taxes on cost of all materials including cost and conveyance of all materials to site , all labour charges etc. complete for finished item of work

Supply and fixing of M.S.Grill with outer angular frame of rolled steel equal angle of ISA 2525 of size 25mm x 25mm x 4mm welded with safety bars of 10mm square rods at 150mm (7 Horizontals & 7 Verticles)centre to centre horizontally and verticlally including red oxide primer of grade-I quality, sales and other taxes, cost and conveyance of all materials to site, all labour charges and fixing in position etc., complete for finished item of work.

Providing and fixing factory made 0.75*1.80m solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 mm with encapsulation of 6 mm rigid layer on all external surfaces. The door frame will have a rebate of 32mm/ 37mm. The two Vertical members are to be joined together with the horizontal member using 8x75 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.

Flooring and Treads with Polished shabad / Tandur stone minimum 15 to 18 mm thick of size (0.254M x0.254M) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, and water and flooring stones etc., complete, excluding seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work.

Supplying fabricating and fixing in position all heavy steel works like trusses, stanchions, heavy beams and gutter (by using MS tubes and pipes) including cost of welding rods, power charges, erecting in positions and fixing by using chain pulley blocks derek pole arrangements and cranes, etc complete.

Roofing:Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.-10 sqmts

ELECTRIFICATION

Supplying and wiring with 2 runs of14/0.30 mm (1.50 Sq.mm FRLS/ HFFR P.V.C insulated flexible copper cable L&T/ Havels /Standard/Polycab/Power flex make with ISI mark in the existing metallic / non-metallic conduct pipe with 6A 1 modular type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for light, bell, fan and exhaust fan points in Non Residential Buildings

Supply and run of 2 of 36/0.3mm (2.5 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes Polycab / Havells / Gold medal /Fortune art /L&T/ HPL in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and run of 2 of 56/0.3mm (4.00 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes Polycab / Havells / Gold medal /Fortune art /L&T/ HPL in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and transportation of 20W, 2000Lumens,T8, 1200mm length LED light ,input voltage AC 220-260 volts with PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,complete manufature has to submit LM79,LM80 & Photobiological saftey report.Luminaire Performance complies to IS 10322 Part (5/sec 3)& IEC 60598-1,IEC 60529 ISO certified company.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

WATER SUPPLY AND SANITARY ARRANGEMENTS

Supply and fixing of 80 mm dia GI pipe including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Manufacture,supply and dlivery of 80mm PN 20 cast carbon steel rising/ non rising spindl sluice valve design standard as per IS: 14846/2000 for ater supply scheme ith SS spindleand SS orking parts th grade of cast steel for body bonnet, dome, stool cover, wedge,stuffing box, gland thrust plate, shall be as per IS:1030/1998 ( the valve shall be usd for high pressure schmes & pumping stations) excluding transportation etc complete

2) Providing repairs to AHS Cheepurugudem o Dammapeta (M) in Bhadradri Kothagudem District

Supply and Fixing of 18 Gauge MS Plain Sheet window Shutter of size 0.50 x 0.45 M with shutter angular frame of rolled steel equal angle ISA 2525 of size 25 x 25 x 4mm elded ith fixturs such as MS powder coatd toer bolts IS 204 100 mm long 1 Nos, MS Powder Coated Butt Hinges IS 205 100mm long 2nos including Red Oxide Paint of grade - I quality, sales and other taxes on cost of all materials including cost and conveyance of all materials to site , all labour charges etc. complete for finished item of work

Providing specialized high solid, coldapplied,acrylic elastomeric liquid membrane coating treatment to the terrace/roofing ith fire emsh/ geo fabric duy a, cleaning of the surface from dirt, dust and other contaminations, b, applying one coat of high solid, cold applied, acrylic elastomeric liquid membrane coating, c. immediately application of one coat of high solid,cold applied, acrylicelastomeric liquid membrane coating, e.laying of fibre mesh 40 GSM/ geo fabric 40 GSM on the surface,f. over the fibre mesh, application of two coats of high soild, cold applied,acrylic elastomeric liquid membrane

Manufacturing, Supply, delivery and Fixing of plain MS Plain Sheet Door of size 1.20x2.10 m with frame made of L angular section 40x40x6mm and inner frame of double leave shutters with MS L angle of 25x25x4mm welded ith 2 nos of 25x25x4 angle and 3 nos of 25x4mm each leaf and welded with powder coated fixtures including Red Oxide Paint including sales and other taxes on cost of all materials including cost and conveyance of all materials to site etc. complete for finished item of work

Supply and Fixing of 18 Gauge MS Plain Sheet Window of size 0.90x1.20m (two leaf shutters) with outer angular frame made of rolled steel equal angle ISA 4040 of size 40 x 40 x 6mm and inner Shutter angular frame of rolled steel qual angle ISA 2525 with 25 x 25 x 4mm and rolled steel Tee bars 40x40x6 mm one number horizontally and vertically at the center of the window also welded ith fixturs such as MS Powder Coated Tower bolts and and 3 Nos. of 18 Gauge Mild Steel Plain Sheet and welded with 4 Nos. of 225mm Long hold fasts of 40 x 40 x 6mm, and along with the following fixtures for each shutter such as 6 Nos. of 100mm long MS Powder Coated Hinges , 6 Nos. of 100mm of 125mm MS Powder Coated Handles including Red Oxide Paint including sales and other taxes on cost of all materials including cost and conveyance of all materials to site etc. complete for finished item of work for Window of size 1.52m. x 1.372m.

Supplying, fabricating and fixing in position all heavy steel works like trusses, stanchions, heavy beams and gutter (by using MS tubes and pipes) including cost of welding rods, power charges, erecting in positions and fixing by using chain pulley blocks drek pole arrangements and cranes etc. complete for finished item of work

Roofing:Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.-10 sqmts

Ellies pattern flooring ith CC (1:5:10) prop using 40mm nominal size HBG metal brought from approved quarry laid 80mm thick for bed concrete and laid over with CC (1:2:4) prop using 20mm to 10mm graded HBG metal 40mm thick water to work site and all operational, incidntal, labour charges such as machine mixing,laying curing etc, complete for finished item of work.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50 water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work.

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, any brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in all floors

ELECTRIFICATION

Supplying and wiring with 2 runs of14/0.30 mm (1.50 Sq.mm FRLS/ HFFR P.V.C insulated flexible copper cable L&T/ Havels /Standard/Polycab/Power flex make with ISI mark in the existing metallic / non-metallic conduct pipe with 6A 1 modular type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for light, bell, fan and exhaust fan points in Non Residential Buildings

Supply and run of 2 of 36/0.3mm (2.5 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes Polycab / Havells / Gold medal /Fortune art /L&T/ HPL in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and run of 2 of 56/0.3mm (4.00 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes Polycab / Havells / Gold medal /Fortune art /L&T/ HPL in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and transportation of 20W, 2000Lumens,T8, 1200mm length LED light ,input voltage AC 220-260 volts with PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,complete manufature has to submit LM79,LM80 & Photobiological saftey report.Luminaire Performance complies to IS 10322 Part (5/sec 3)& IEC 60598-1,IEC 60529 ISO certified company.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

WATER SUPPLY AND SANITARY ARRANGEMENTS

Supply and fixing of 80 mm dia GI pipe including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Manufacture,supply and dlivery of 80mm PN 20 cast carbon steel rising/ non rising spindl sluice valve design standard as per IS: 14846/2000 for ater supply scheme ith SS spindleand SS orking parts th grade of cast steel for body bonnet, dome, stool cover, wedge,stuffing box, gland thrust plate, shall be as per IS:1030/1998 ( the valve shall be usd for high pressure schmes & pumping stations) excluding transportation etc complete

3) Providing repairs to AGHS Ankampalem of Dammapeta (M) in Bhadradri Kothagudem District

Providing and fixing factory made 0.75*1.80m solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 mm with encapsulation of 6 mm rigid layer on all external surfaces. The door frame will have a rebate of 32mm/ 37mm. The two Vertical members are to be joined together with the horizontal member using 8x75 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.

Supply and fixing of M.S.Grill with outer angular frame of rolled steel equal angle of ISA 2525 of size 25mm x 25mm x 4mm welded with safety bars of 10mm square rods at 150mm (7 Horizontals & 7 Verticles)centre to centre horizontally and verticlally including red oxide primer of grade-I quality, sales and other taxes, cost and conveyance of all materials to site, all labour charges and fixing in position etc., complete for finished item of work.

Supply and Fixing of 1.05x2.13 m(single leaf) flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as mild steel z type hold fasts 6 nos, MS powder coatd tower bolts IS 204 300 mm long 1 Nos and 10mm bolt dia 2 nos,MS powder coated handles IS 208125mm long 4nos, MS Powder Coated aldrop IS2681 300mm long 1 no, MS Powder Coated door stopper 2 nos sales and other taxes on cost of all materials such as making of door frame,fixing inposition,fixing of shutters and hard ware fixtures etc complete for finished item of work , the frame should be embedded to a depth of 40mm in flooring.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Flooring and Treads with Polished shabad / Tandur stone minimum 15 to 18 mm thick of size (0.254M x0.254M) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, and water and flooring stones etc., complete, excluding seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work.

WATER SUPPLY AND SANITARY ARRANGEMENTS

Supply and fixing of 80 mm dia GI pipe including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Manufacture,supply and dlivery of 80mm PN 20 cast carbon steel rising/ non rising spindl sluice valve design standard as per IS: 14846/2000 for ater supply scheme ith SS spindleand SS orking parts th grade of cast steel for body bonnet, dome, stool cover, wedge,stuffing box, gland thrust plate, shall be as per IS:1030/1998 ( the valve shall be usd for high pressure schmes & pumping stations) excluding transportation etc complete

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Earth work excavation for foundation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Foundation of Building.(APSS No. 308) (SBC-20t/Sqm)

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402)excluding seignerage & GST charges for Floor Bed

Plain Cement Concrete M15 grade nominal mix (1:2.5:5) proportion (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Bed Blocks and Hold Fasts (APSS No. 402)

RUPEES FOURTY LAKHS SIXTY FIVE THOUSAND EIGHT HUNDRED NINETY SEVEN ONLY