AR AND MO of Housing Colony Mandhala

Provide labour such as Electrician for Street light maintanance for one year.(5 day week and 240 days in one year) as approved by the Engineer in Charge.

Provide labour such as T-Mate for Street light maintanance for one year.(5 day week and 240 days in one year) as approved by the Engineer in Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required: and approved by the Engineer in Charge.- Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. and approved by the Engineer in Charge A) 63Amp Cat-A

Supplying and fixing following rating, Four pole, 400 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer in Charge.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, 3 core cable in the existing surface/ recessed steel/ PVC conduit as required. and approved by the Engineer in Charge 3x 1.5 sq. mm

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed working voltage 1100 volts grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. and approved by the Engineer in Charge Armoured cable 16 sq. mm (four core)

Armoured cable 25 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-and approved by the Engineer in Charge Armoured cable 16 sq. mm (four core)

Armoured cable 25 sq. mm (3.5 core)

Providing and fixing of EDGE NXT LED Next Generation LED street light of 70 watt with pressure die-cast housing along with polycarbonate modular secondary lens optics for City Road application (A2 &B1 road category) with IP66 ingress protection. 4kV inbuilt and 10kV external surge protecton with Top opening driver cover for easy maintenance. Efficacy120 lm (ordering code WENXT P 84L WH CR PC SD) of Bajaj or its equivalent make complete in all respect with connections as required or as approved by the Engineer in Charge.

Providing and fixing of Epyz 50Watt Solar Street Light Outdoor Waterproof with Remote 196 LEDs Motion Sensor Light and Dusk to Dawn for Garden,Street,Lawn [ with Out Pole ] complete in all respect with connections as required or as approved by the Engineer in Charge.

Providing and fixing of Street light of 45 watt with pressure die-cast housing along with polycarbonat (ordering code PSTSM2357) of Penasonic or its equivalent make complete in all respect with connections as required or as approved by the Engineer in Charge.

Providing and laying of Double walled corrugated(DWC)HDPE pipe 120 mm size direct in ground including exacavation and refiling the trench etc as required or as approved by the Engineer in Charge.

Supplying , fixing and repairing of LED street light 150 watt driver suitable for existing street lights of C&S make or equivalent compatible with existing street light as required and approved by the Engineer-in-charge. (this quantity has been taken if existing LED driver mass burnt out (30-50 lights) due to short circuited/over voltage in HPSEBL transformer / LT line.) and approved by the Engineer in Charge

Supplying , fixing and repairing of LED street light 150 watt high lmens PCB contains LED chip with 120-140 lumens per watt/LED suitable for existing street lights of C&S make or equivalent compatible with existing street light as required and approved by the Engineer-in-charge. (this quantity has been taken if existing LED chip mass burnt out (30-50 lights) due to short circuited/over voltage in HPSEBL transformer / LT line.) and approved by the Engineer in Charge

Supplying fixing and repairing of LED street light 45 watt driver suitable for existing street lights of C&S make or equivalent compatible with existing street light as required and approved by the Engineer-in-charge. (this quantity has been taken if existing LED driver mass burnt out (30-50 lights) due to short circuited/over voltage in HPSEBL transformer / LT line.) and approved by the Engineer in Charge

Supplying fixing and repairing of LED street light 45 watt high lmens PCB contains LED chip with 120-140 lumens per watt/LED suitable for existing street lights of c&s make or equivalent compatible with existing street light as required and approved by the Engineer-in-charge (this quantity has been taken if existing LED chip mass burnt out (30-50 lights) due to short circuited/over voltage in HPSEBL transformer / LT line.)

Providing and fixing Magnetic Contactor 3 Pole Power Contactors,AC Coil up to Frame-4 and AC/DC Universal coil with SMART ECM (Electronic Control Module) in-built for Frame-5 to Frame-8,Conforms to IS / IEC 60947-4-1,Finger proof IP20 terminals,Low VA Burden Wide operating band coils with Class H Insulation of Havells make or equivalent make as required and approved by the Engineer-in- Charge.

Providing and fixing of sheet metal cover plate minimum 3 mm thick in the existing servicing window of 6/9 mtr pole incl. all accessories as reqd and approved by Engineer in charge.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-40 mm dia. G.I. pipe, heavy class and approved by the Engineer in Charge

Purchase of Petty items required for maintenance of street lights such as wire, screw, nuts, tape , erection of existing poles etc.(One Job Per Year)

Providing hydra for repaire and maintenance of street light of 9 mtr pole as reqd and approved by Engineer in charge.