NIT NO. E.E./F-03(4)/2026-2027/24 Dated 10.04.2026

Estimate for White Washing & Painting of Dairy Plant Building & Repering & Maintanance of Lab Room of Dairy Plant, Raipur

S.No Sor No. Particulars Detail No L B D/H Qty Unit

1 14.13 Providing and applying 2mm thick ready mix exterior grade putty (Birla wall care, Alltek Superfine W/R of (NCL), J.K. wall putty) on walls to make the surface smooth and even.

GRAND TOTAL 7879.93 sqm

2 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.

qty same as i.n. 1+2+3 7879.93 sqm

3 14.10.1 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade.

On new work (Two or more coats)

Quantity same as I.n. 1+2

4 14.16.1 Painting new exterior surface (two or more coats) with PREMIUM TEXTURED paint as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

On new work (Two or more coats ) 2487.39 Sqm.

5 14.19 Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including priming coat with epoxy primer, preparation of surface, etc. complete. 500 sqm

6 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing andplastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :

7 Painting on new work (two or more coats) to give an even shade with:

8 4.15 Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane,black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/ltr andviscosity 70 - 160 cps. over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°CCold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.

9 7.5.1 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

10 11.3.1 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11 11.7 Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand).

12 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. 406 KG

13 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick wallsjunctions including scaffolding and all lead and lifts etc.completebefore plastering upto 10mts in height. 125 SQM

14 10.61 Providing and fixing at all height false ceiling consisting of frame work "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each aving clips of 10.5mm at 450mm centre to centre shall be fixed in adirection perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the

15 13.6 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.

16 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or withwooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Angle-iron frames 250 KG

17 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete

18 9.61.2 Providing and fixing aluminium composite panels in approved panel sizes,thickness and shape on aluminium frame work on face of building. (Frame to be paid separately)

19 8.163 A.6 Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completelyfixed ventilator with S.S. friction hinges (350*19*1.9) made of (bio series) frame 67*60mm, sash 67*80 mm all

20 8.165 C. 1 Casement door with 3D hinges made of (big series) 67*64 mm & sash 67*110 mm both having wall thickness of 2.3 + - 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension.

Sub Engineer (Ele.) Assi. Engineer Executive Engineer