PROVN OF COVERED REPAIR BAY AND HARD STANDING FOR A VEH GARRAGES OF DEMO SQN, ARMY WAR COLLEGE AT HFFR.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Cement concrete1:4:8 type D2 (40mm graded aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

M&L M-25 (Design Mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Wearproof topping 15 mm thick in CM 1:2 as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth mixed with metallic floor hardner complete all as specified and directed. Note:- Metalic floor hardner will be measured and paid separately.

Supply only Metallic Floor hardner, complete all as specified and directed.

M&L M-25 (Design Mix) in beams, cantilevers, bressummers, lintle over 1.5 mtr span and mass concrete complete all as specified and directed.

M&L M-25 (Design Mix) in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for fair finished surface of concrete complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for fair finished surface of concrete complete all as specified and directed.

M&L Brickwork with fly ash / modular bricks, straight or curved on plan exc 6m mean radius, built in C:M 1:4 complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4on fair faces of brick work or concrete surfaces, complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:6on fair faces of brick work or concrete surfaces, complete all as specified and directed.

M&L for preparation of new surfaces and applying two coat of white wash complete all as specified and directed.

M&L for preparation new surfaces all and applying two coats of cement base paint with roller complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Description same as per Item No. 18.00 above but 6 to 8mm dia complete all as specified and directed.

Description same as per Item No. 18.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) using Fe 410- W ( Grade E -250) Quality A, including distance pieces, cleats etc complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 22.5cm but n exc 30cm long, complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

Excavating over areas, n exc1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush, complete all as specified and directed.

S&F 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L Prepare the previously painted surface of primer (red oxide) and applying two coats of synthetic enamel paint complete all as directed.

M&Lprepration of newly or previously untreated steel surfaces of any description 10 cm in width of girth & applying one coat of red oxide and two coats of synthetic enamel paint complete all as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC conduit fixed on wall/ceiling with saddles, screws etc of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including including modular metal flush box , cover plate and cover frame of suitable size making good disturbed surface of walls and floors etc. for One light / fan /bell controlled by one, one way switch 5/6 Amps, Complete all as specified and as directed.

Description same as per Item No. 31.00 but for One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch, complete all as specified and directed.

Description same as per Item No. 31.00 but for One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch, complete all as specified and directed.

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC conduit fixed on wall/ceiling of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets, and making good disturbed surface of walls and floors etc. complete all as specified and directed.

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed.

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F decorative ultra slim poly carbonate LED tube light fitting 4 feet long 18 to 22 watts with THD less than 15% very high effficiency suited for T-8 tube light luminare with system efficiency 120 lumens per watts, fixture lumen package should be ≥ 2200 lumen. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed.

S & F LED bldg security light fitting 30 watts, lumen output >= 110lm/W made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed.

S&F MCB DB SPN 08 way IP 43 IK 09 double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed.

S&F MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed.

M&L for Sub main wiring with 2 single core,6 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 6.0 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

S&F Exhaust fan , steel body AC single phase 230 volt of size 300 mm mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified and directed.

S&F rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed

S&F wall mounted fan single phase 230 volt, 400 mm sweep including flexible copper cable for electric connections complete all as specified and as directed.

M&L for LED Midbay light 120 watts with IP 66 & IK 08 protected LED midbay with PDC housing & toughened glass suitable for ceiling ( surface/suspended) mount with wide beam complete incl connecting wire from to ceiling rose to connector & fixing arrangement on existing square pipe all as specifed and directed.

S&F LED security light fitting 90 watt lumen output >= 120 lm/W made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection fixed on 9 mtr pole complete with GI pipe bend into sizes with clamps , nut, bolt and washers complete all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing incl taking down of old service connection any size all as as directed at site.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing all as as directed at site.

Excavation in trenches not exceding 1.5 meter depth and 1.5 meter in width in loose/ soft soil for laying of cable/errection of pole getting out soil complete all as specified and directed.

M&L for replacing PCC cable cover class LV , flat size 250x150x40 mm size complete all as specified and directed.

M&L of locally available river sand in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

M&L for FRP junction box three terminal and neutral with one MCB SP 20 A for control of security light from PCC pillar of gates/post top lantern base coping incl PVC wire 1.5 sqmm (02 runs) from FRP Junctiom box to street light fitting inside PVC conduit duly supported with clamps, nuts, bolts and washers and making good of PCC and finishing with cement rendering complete all as specified and directed.

M&L for errection of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 ( 9.0 metres long) Note: Excavation and PCC shall be measured and paid seperately as per relevent item of schedule.

M&L for cement concrete in foundation of poles of grade C2 1:3: 6 ( 40 mm graded aggregate), complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of poles including necessary use and waste of formwork and finishing the surface even and smooth without using extra cement complete all as specified.

M&L Tubes, 'light grade,galvanised, with all fitting of size 40 mm ;laid in trenches for cable protection all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Goyal Construction