Sub work. Supply, erection, testing and commissioning of 22.0.433 KV, 315 KVA transformer and its allied overhead line works for extension of power supply to the Manapet beach in Puducherry.

Amount

Providing and laying in position cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation etc.including form work etc as required

Supply and fixing of wall mount bracket of 50 mm dia GI pipe suitable for SVL / MH fittings with clamp , bolts and nuts as required.

Supply of 6 SWG G.I wire

Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required:3 1/2 X120 Sq.mm

Supplying and erection of stay set complete (galvanised) with per no 19/20 mm dia x 1.8 metres long stay rod , anchor plate of size 45 cm x 45 cm x 7.5 mm , thimble , stay clamps , bow tightener , 7/4.00 mm dia G.I stay wire and strain insulator etc.in cement concrete 1:3:6 (one cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc.as required

Supply and fixing LED street light fitting wtih 120 watts with lens, IP 65/66, white colour with necessary over voltge, under voltage and surge protection with three years onsite warranty for replacement / rectification. (Make:- Philips / Havells / Crompton / Bajaj / LED GEO, The rate is inclusive of all taxes).

Supplying of 3 1/2 x 300sqmm armoured aluminium U.G cable-1.1KV grade .Make:Finolex/Polycab

Supply, Erection and Testing and Commissioning of Outdoor type 22/0.433Kv,315KVA Energy efficient Level-II Distribution transformers as per the Puducherry Electricity Department specifications with off load tap switch having > position with voltage connection in steps of 2.5% with all required accessories. As per the Electricity Department specifications.Make: RPG Raychem(P) Ltd / Indotech / Kirloskar / Wilson / Sakthi Transformers.

Supply, Erection and Testing and Commissioning of LT - CT metering panel as per the electricity department's specificatiton.

Supplying and erection of 30'RCC Pole.

Supplying and drawing of ACSR conductor of 7/ 2.59 sqmm diameter including binding etc., as required

Supply and fixing of LT pin insulator with pin

Supply and fixing of Shackle insulator with metal parts

Supply and fixing of F clamp .

Supplying and fixing of HT stool .

Supply and fixing of single phase LT cross arm including ms clamp.

Supply and erection of CI Knobs.

Supply and fixing of H.T. tapping channel of size 100x50 x 50 X 10mm for 11/22 Kv over head line.

Supply and fixing of V cross arm.

Supply and fixing of 22 Kv pin insulator.

Supply and fixing of 22 Kv G.I.pins.

Supply and fixing of disc metal parts of integral socketed type tension clamp complete with keeper piece, U bolt & nuts, spring washers with security clilp.

Supply and fixing of 2 nos of 11 KV discs insulators.

Earthing of line materials of the HT pole of the ground in the pole concrete including 8 SWG G.I. wires..

Supply of MS bolt and nuts.

Supply and erection of 22KV DP Structure as per following specifications: 30 feet RCC Pole 2 nos, 100x50 mm channels, angles, Transformer bed channels, clamps bolt nuts and 22KV AB switch operating handle 1 set, 22KV Pin insulaters, HG fuses, 22KV Lighting arrester, 0/2 SWG Copper jumpering and alchanthin pipes, other supporting insulater and iron materials and necessary civil works etc.

Providing and fixing of 2 sets of 400A fuse base with 315A Link.

Supply and erection of GI Hot DIP Galvanised Tubular pole for the effective corrosion resistant with base plate,stiffner plate and four ornamental decorative brackets suitable for the bridges/streets/junctions.Specification-pole dimension 165.1x4.85x3000 mm, 139.7x4.5x2750mm,114.3mmx3.65xmmx3250mm and bracket dimension 114.3mm x 3.65xmm x 1000mm, 60.3x3.25x1500 mm x4 Nos. base plate with stiffner plate of size 350 mm x 350 mm x16 mm .The pole painted with two coats epoxy primer and finished with one coat of polyurethane based metallic paint Grey/Green colour and inbuilt cable connection box and overall height:10 Mts .The rate including excative and refilling with cement concrete 1:2:4 ratio of size 850x850x1500 mm enclosing the foundation bolt and coping above the ground level of size 600x600x300 mm. The specifications and design should got be approved by engineer-in charge make:orient/bajaj.

Fabrication, supply, erection, testing and commissioning of one no of SMC Box (Make:Sintex) with metering and timer panel panel board for the power supply of over all size 850mm x 350mm x 250mm made out of glass wool with resin material. The front top portion have energy meter with viewing glass with 10mm hylem sheet. The bottom side compartments with 40 – 63A rating, TPN MCB, “C Series, 10KA breaking capacity (Make – Siemens/ABB), 1no. of Timer switch (Daily) analog with battery backup to 200hrs. (Make – L&T – Hagger/ Legrand - Lexic), 1no. 60A power contactor (Make – C&S), 1no. of toggle switch (Make – C&S), 3nos of signal lamp (Blue, Red, Yellow). The switch units are to be fixed with in the allotted size in the 10mm hylem sheet. The bottom sheet of the shell should be of PVC thick cold rolled for cable entry. The panel has to be mounted with required concreting and supports. Interior connection between the switch fuse units are to be done with 2.5sqmm / 6.0 / 10.0sqmm ISI marked, FR PVC insulated, single core copper conductor cable. (Make – Finolex / Polycab).

Providing and fixing 50mm x 6 mm G.I strip on surface or in recess for connections etc., as required.

Supplying of fire bucket painted red & approved quality (set of 4 buckets)

Supplying and fixing danger plate 440 volts written in two languages.

Supplying and fixing carbondioxide fire extinguisher type. 4.5 Kg capacity.

Supplying of first aid box.

Supplying and fixing of shock treatment chart.

Supplying of Hand gloves suitable for 22 KV.

PAOWER TECH ENGINEERS

Kumar Electricals Service