Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAdmitted-Finance | ₹1.1 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SELVA GANAPATHY ENGINEERING L1 |
|---|---|---|---|---|
| 1.00 | 3 mm SS 304L Plate - Supply, lining on floors of concrete floor having MS Embedded plate grids involving Inspection /Rectification of Floor EP's Required, forming of sheets, chemical cleaning, cutting, laying liner panel on EP grids, GTA welding, DPT, Vacuum box testing and passivation as per technical specifications at active area. (Plates corrosion rate shall be less than 18 mpy as per testing done with ASTM A 262 Pr. A & C corrosion test method) | 85 | Sqr.Mtrs | 21,400 ₹18,19,000 Lowest |
| 2.00 | Supply & lnstallation of HUS3-C 8/10 SCREW ANCHOR for anchorage of 6mm thick MS flats on concrete floor at active area up to 50mR/Hr with Special Work Permit. | 600 | Nos. | 500 ₹3,00,000 Lowest |
| 3.00 | Supply, Fabrication and erection of SS Pipe supports/ladder/structural from SS 304L sheets, channels, angles, plates, etc. which involves acid cleaning/shearing/bending/ forming and welding (GTAW), including LP examination and weld passivation at active area up to 50mR/Hr with Special Work Permit. | 1,500 | Kg | 724 ₹10,86,000 Lowest |
| 4.00 | Supply of CS plates, chequered plates, Flats/ Angles/ Supports (IS 2062), Fabrication structural platforms or supports for equipment / piping, welding by SMAW process, installation and painting including LP examination of all welds at active area up to 50mR/Hr with Special Work Permit | 2,000 | Kg | 200 ₹4,00,000 Lowest |
| 5.00 | Erection of SS pipe sub-assemblies which involves preparation of spool drawings as per approved process flow sheet with actual site measurement transportation of pipes fittings valves etc from store to site acid cleaning, bending of pipes ,final erection of pipe sub-assemblies along with inline specialities on permanent pipe supports of pipe spools /lines (pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit. | 500 | Inch mtr | 700 ₹3,50,000 Lowest |
| 6.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area | 200 | inch Dia | 1,410 ₹2,82,000 Lowest |
| 7.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit. | 450 | inch Dia | 2,900 ₹13,05,000 Lowest |
| 8.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area | 200 | inch Dia | 1,200 ₹2,40,000 Lowest |
| 9.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit. | 300 | inch Dia | 2,000 ₹6,00,000 Lowest |
| 10.00 | Radiography Examinations of Butt weld in Active area | 200 | per exposure | 2,806 ₹5,61,200 Lowest |
Tender Value
₹1.1 Cr
EMD Value
₹2.3 L
Closing Date
25 Jun 2025, 3:00 pmClosed
GM, INRPK
GM, INRPK Kalpakkam
Fabrication, Supply and Erection of SS lining and Piping works in DNP area
2025_BARC_862780_1
BARCF/INRPK-MA/WM/TR/35/2025
Open Tender
Miscellaneous Works
Item Rate
365 days
Kalpakkam
Fabrication, Supply and Erection of SS lining and Piping works in DNP area
7 documents required · 7 mandatory
₹0
₹2.3 L
14 Oct 2025
6 Jun 2025
1 Jul 2025
9 Jun 2025
25 Jun 2025
18 Jun 2025
13 Jun 2025 - 17 Jun 2025
Amount
3 mm SS 304L Plate - Supply, lining on floors of concrete floor having MS Embedded plate grids involving Inspection /Rectification of Floor EP's Required, forming of sheets, chemical cleaning, cutting, laying liner panel on EP grids, GTA welding, DPT, Vacuum box testing and passivation as per technical specifications at active area. (Plates corrosion rate shall be less than 18 mpy as per testing done with ASTM A 262 Pr. A & C corrosion test method)
Supply & lnstallation of HUS3-C 8/10 SCREW ANCHOR for anchorage of 6mm thick MS flats on concrete floor at active area up to 50mR/Hr with Special Work Permit.
Supply, Fabrication and erection of SS Pipe supports/ladder/structural from SS 304L sheets, channels, angles, plates, etc. which involves acid cleaning/shearing/bending/ forming and welding (GTAW), including LP examination and weld passivation at active area up to 50mR/Hr with Special Work Permit.
Supply of CS plates, chequered plates, Flats/ Angles/ Supports (IS 2062), Fabrication structural platforms or supports for equipment / piping, welding by SMAW process, installation and painting including LP examination of all welds at active area up to 50mR/Hr with Special Work Permit
Erection of SS pipe sub-assemblies which involves preparation of spool drawings as per approved process flow sheet with actual site measurement transportation of pipes fittings valves etc from store to site acid cleaning, bending of pipes ,final erection of pipe sub-assemblies along with inline specialities on permanent pipe supports of pipe spools /lines (pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit.
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit.
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit.
Radiography Examinations of Butt weld in Active area
Supply of SS 304L Plate/ Sheet as per department approved split-up quantity in conformance to technical specification , ASTM A240 standards with supplementary corrosion rate requirements (Corrosion rate shall be less than 18 mpy as per testing done with ASTM A 262 Pr A & C corrosion test method).
Fabrication, Testing & Supply of 8 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 15 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 25 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 40 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 50 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 80 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 15 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 25 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 50 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 80 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 15 NB Manually Operated Glove Valve suitable for 360 degC as per tech specs
Fabrication, Testing & Supply of 25 NB Manually Operated Glove Valve suitable for 360 degC as per tech specs
Fabrication, Testing & Supply of 40 NB Manually Operated Glove Valve suitable for 360 degC as per tech specs
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .