Repair and reconstruction work of 01 No. 12x88 m shaded auction platform damaged due to fire at the new fruit and vegetable market site Chakarpur Kanpur

Dismantling of girder ,truss and other steel work including stacking of dismantlçd material as directed by cngineer in charge within a distance of 60 metre. material within 50 metres lead in R.S. Joists

Dismantling roofing including ridges, hips, valleys and gutters and stacking the material within 50 metres lead of: Asbestos Cement sheet

Structural steel work in single section „fixed with or without connecting plate ,including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete.

tructural steel work riveted ,bolted or welded in built up section ,trusses and frame work „including in single section, fixed with or without connecting plate, including culing, hoisting, fixing in position and applying a priming coat approved stcel primer all complete.

Brick work with common burnt clay bricks of class 150 in foundation and plinth in : Cement mortar 1:4 (1 cement :4 coarse sand )

12 mm cement plaster of mix 1:4(1 cement :4 coarse sand) etc

Painting lst coat over priming coat (but excluding cost of priming coat ) and other metal surface uptom10 cm width or girth of s,all articles not exceeding 0.1 sqm in area with superior synthetic enamel such as luxol 3 hi glas apcolite , superlac dulex specified brushing to give and even shade and including the cleaning the surface of all dust dirt and other foreign matter sand papering and scraping including scrapping including cost of all materials,labour, tools , and plants etc. required for |proper completion of the work.For 2 coat

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 J2> V grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 |microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length uplo 12 metre or as desired by Engincer-in charge. The shect shall be fixed using self drilling metre or as desired by Engincer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uplo any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised sieel sheet roofing accessories 0.50 mm (+0.05) %) total coated thickness, Zinc coating 120 grams per sqm as per 1S: 277, in 240 mpa steel grade, 5-7 42.Smicrons epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete.Ridges plain (500-600mm) Gutter (600 mm over all girth

Finishing walls with Acrylic emulsion paint of approved brand land manufactur and of required shade on undercoated wall surface to give even shade over including curing cost of including cost of all materials ,labour, tools, and plants etc. required for proper completion of the work.