AUGMENTATION OF STORAGE CAPACITY OF WATER SUPPLY

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to VIII are prepriced by MES under Ser No. 2.00 to 9.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES

Lumpsum price worked out by the tenderer for "Excavation and Earth work including site clearance and Land Development" as listed in Schedule 'A' Part-II

Lumpsum price worked out by the tenderer for "Internal Water Supply" as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for "RCC Retaining Wall" as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for "Demolition/Dismantling" as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for "External Water Supply" as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for "External Electrification " as listed in Schedule ‘A’ Part-VIII

Subtotal

NOTE: Schedule ‘A’ Part - IX is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

SCHEDULE `A' PART - IX (MISC ITEMS) (INTERNAL ELECTRIFICATION) Supply and fix MCB SP 240 volts 32 Amps 10KA 'C' curve complete all as specifed and as directed. Make:- L&T /Legrand /Indo Asian/ ABB/ Siemens/ Schneider/ Standard / Havells

Supply and fix MCB SP 240 volts 6-32 Amps 10KA 'C' curve complete all as specifed and as directed. Make:- L&T /Legrand /Indo Asian/ ABB/ Siemens/ Schneider/ Standard / Havells

Supply and fixing of decorative cute lines LED lighting fixture of 24 Watt 6000K,220V,50Hz with extruded aluminium heat sink, environmental friendly energy efficient fitting surface mounted complete all as specified and as directed. Make:- CG Cat Part No. LCCLB24-CDL or equivalent in Havells/Philips/Bajaj

Supply and fix ceiling fan 5 star rated, 1200mm sweep, of model No. ES-505 * ( white colour) working on single phase 230 volts, 50 Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq mm complete all as specified and as directed. Make:- Havells Model No.ES-505* or equivalent in CG/Bajaj

Supply and fix Exhaust fan 300mm sweep, 900 RPM of model Turbo force working on single phase 230 volts, 50 Hz AC supply complete with including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of suitable size of 0.75 sqmm complete all as specified and as directed. Make:- Havells/ Bajaj/CG

Supply and fix building security luminaire with high power LED and unique peanut lens to ensure uniform distribution, higher spacing between poles and maintenance free system, 1x25watts LED light fitting including suitable down rod, clamps, nut, bolts and other related items for fixing the wall/surface suitable for 230 volts, 50Hz AC supply complete all as specified and as directed. Make:- CG cat part no LSTO-25-CDL or equivalent in Philips/ bajaj/ Havells

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.15 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by with 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 mtr, complete all as shown in electrical plate No 3 of schedule Part-I.

Notes:- (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit, RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

RCC RETAINING WALL Material and labour for high strength CRS bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Supply of approved earth obtained from outside MoD land for the purpose of forming embankment including necessary excavation and getting out in hard/dense soil and depositing where directed all as specified and as directed.

EXTERNAL WATER SUPPLY Material and labour for cutting of existing CI/MS/DI Pipes in position for insertion of new tees, branches of size 400mm dia etc complete all as specified and as directed.

Material,labour and laying of ductile iron pipe flanged type(both end flanged) centrifugally cast (spun) including suitable specials class K-9, in any length, laid in trenches/floors or on supporting pillar of size 150 mm dia as per IS -8239/2000 and with inside cement mortar lining and out side with blue in colour complete all as specified and as directed. Make:- TATA/Electro steel/Jindal

Material,labour and laying of ductile iron pipe flanged type(both end flanged) centrifugally cast (spun) including suitable specials class K-9, in any length, laid in trenches/floors or on supporting pillar of size 200 mm dia as per IS -8239/2000 and with inside cement mortar lining and out side with blue in colour complete all as specified and as directed. Make:- TATA/Electro steel/Jindal Note for item No.22 & 23:- Excavation,earthwork,fittings,joints etc shall be measured and paid separately under respective schedule and BOQ.

Taking up 250mm dia ductile iron pipe spigot and socketed type from back side of Buniyadabad pump house and relaying the same at site including all fittings complete all as specified and as directed.

Taking up 100mm dia GI pipe medium grade from back side of Buniyadabad pump house and relaying the same at site including all new fittings complete all as specified and as directed.

Taking up PPR pipe of 110mm dia nearby Buniyadabad pump house including all fittings complete all as specified and as directed.

Relaying and testing of 110mm dia PPR pipe with proper jointing including jointing material and all fitting complete all as specified and as directed. Note:- (i) Pipes retrieved against BOQ item No.26 shall be relayed. (ii) Any new fittings as required during relaying/re-route of pipes shall be provided by the contractor and is deemed to be included in the quoted rate.

Material and Labour for ductile iron fittings such as bends,tapers,tee,pieces(single and double branch) any type/angle/radius and straight connecting pieces but all ends flanged/spigot and socketed type upto 400mm dia bore complete including nuts,bolts and washers complete all as specified and as directed.

Excavation in trenches and construction of masonry valve chambers of Size (1000X1000X1000mm) internal dimension with PCC (1:3:6) type, solid block masonry 20 cm thick in cement mortar 1:6 over concrete foundation 100mm thick PCC (1:4:8) type D2 50 mm thick PCC 1:2:4 type B1 as in coping, 15 mm thick plaster in cement mortar 1:4 for internal surfaces of wall and externally upto 15 cm below ground level on masonry , MS sheet 3.15 mm thick with hinged cover with locking arrangements including lifting handle fitted to 50 x 50 x 5 mm angle iron frame embedded in PCC coping including two coats of synthetic enamel black paint over one coat of red oxide primer to steel surface including earth work removal of surplus soil to a distance not exc 50 mtr complete all as specified and as directed.

Supply and fixing Sluice valve 400mm bore, Class PN-1.6 flanged and drilled at both ends confirming to IS:14846 with ISI mark, having stainless steel spindle and gun metal rings including wheel for operation all as specified including all joints with rubber gasket and jointing materials, bolts, nuts, washers complete all as specified and as directed. Make:- Kirloskar/Leader/Upadhaya/Venus/AV Engg.

Ditto all as per item No.30 above but of 250mm bore complete all as specified and as directed.

Supply and fixing 150mm dia new CI double out let air valve as per IS:14845 for fixing up in CI/DI water supply mains complete all as specified and as directed.

Supply, Install, commisioning and testing of pump set, centrifugal,electrically driven, appropriate capacity of 3 phase induction motor with CI casing,bronze impeller and stainless steel shaft mounted on heavy duty bearings with meachanical seals suitable for continous operation at 415 volts , 3 phase , 50 Hz supply with discharge 1140 LPM , at head 75 mtr including necessary PCC foundation complete all as specified by OEM and supply,fix and laying 2 length of LT cable armoured 1100 Volt grade with copper stranded conductor 3 core of suitable size from star delta starter to motor including cable glands,lugs,thimble etc and connection complete and as directed.

Supply, Install, commisioning and testing of pump set , centrifugal ,electrically driven, appropriate capacity of 3 phase induction motor with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings with meachanical seals suitable for continous operation at 415 volts , 3 phase , 50 Hz supply with discharge 950 LPM , at head 35 mtr including necessary PCC foundation complete all as specified by OEM and supply,fix and laying 2 length of LT cable armoured 1100 Volt grade with copper stranded conductor 3 core of suitable size from star delta starter to motor including cable glands,lugs,thimble etc and connection complete and as directed.

Supply and fixing water meter industrial type, magnetically coupled, screwed, supplied and installed complete of size 150 mm dia complete all as specified and as directed.

Supply and fixing brass/gun metal foot valve conforming to IS 4038, supplied and installed complete of size 100 mm dia complete including strainer all as specified and as directed.

Supply and fixing brass/gun metal foot valve conforming to IS 4038 , supplied and installed complete of size 150 mm dia complete including strainer all as specified and as directed.

Supplying , installing , commissioning and testing wall mounted water level digital indicator for showing the capacity of overhead water tank/ under ground sump in 10 equal divisions electrically operated including sensor comprising of the following:- (a) Automatic multilevel visual indicator-01No. (b) Sensor of stainless steel probe SS316- 10 Nos. (c) Alarm - 01 No.

Material and Labour for Fire Extinguisher of 3 kgs CO2 type capacity made from brand new seamless drawn steel cylinder as per IS : 7285 with ISI mark and chief of controller of Explosives approval , fitted with wheel valve as per IS : 3224 with ISI mark , with discharge bend and horn and supplied complete with intial charges as per IS : 15683 with ISI mark and wall bracket. fire rating 13B or 21B complete all as specified and as directed. Make:- MTS Technologies LTD or Fire shield / Cease fire.

Material and Labour for ABC stored pressure type Fire Extinguisher of 6 Kgs capacity , fitted with discharge controlled valve ( Squeeze grip type ) CE marked and pressure gauge , fitted with mono ammonium phosphate powder as per EN 3 615 approval , with discharge hose and open nozzle and supplied complete with intial charge as per IS : 15683 with ISI mark and wall bracket, fire Rating 4A , 55 B complete all as specified and as directed. Make:- MTS Technologies LTD or Fire shield / Cease fire.

Material and Labour for Dry Chemical Powder type Fire Extinguisher of 25 kgs capacity , mounted on Trolley , fitted with gunmetal union cap assembly , inside CO2 gas catridge of 300 gms as per IS : 4947 with ISI mark and powder as per IS : 4308 with ISI mark , with discharge hose and applicator and supplied complete with intial charge as per IS : 10658 with ISI mark complete all as specified and as directed. Make:- MTS Technologies LTD or Fire shield / Cease fire.

Material and Labour for Water CO2 type Fire Extinguisher of 9 Litre capacity , fitted with discharge control valve ( squeeze grip type ) , inside CO2 gas catridge of 60 gms as per IS : 4947 with ISI mark , with discharge hose and open nozzle and supplied complete with intial charge as per IS : 15683 with ISI mark and wall bracket,fore Rating 3A complete all as specified and as directed. Make:- MTS Technologies LTD or Fire shield / Cease fire.

Material and Labour for Fire Bucket 9 Litre capacity , made from galvanized iron sheet , round bottom , white enamel paint inside and red outside and letterred "FIRE" with side handle complete all as specified and as directed.

Material and Labour for Angle iron stand of 50mmx50mm equal angle frame of 5mm thick with height 1.5m and 1.0m width, 3mm thick MS sheet cover on roof painted with red colour including necessary earthwork and PCC suitable for hanging of 04 Nos buckets complete all as specified and as directed.

Supply and fixing at Pump House single line coloured diagram LT electric distribution system and water line distrubution system on plastic/venyle charts of approximate size 1000mm x 700mm, printed with standard instructions,ratings in English on 6mm thick water proof ply wood duly framed with Teak wood batten and transprent glass of 3mm thick at front side as per details given by the Engineer -in -charge complete all as specified and as directed.

Supply and fixing at Pump House shock treatment display chart of approximate size 1000mm x 700mm, printed with standard instructions in English,Hindi and Telugu/Tamil/Bengal languages on 6mm thick water proof ply wood duly framed with suitable size teak wood batten and transparent glass of 3mm thick at front side complete all as specified and as directed.

Material and Labour for Chlorine test kit Manual type measured including four test tubes complete all as specified and as directed.

Supply,fixing and testing 100 mm dia NRV / reflux valves for fixing up in CI/DI water supply mains complete all as specified and as directed.

EXTERNAL ELECTRIFICATION M&L for earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using copper earth strip 25x3mm(upto 7.5m in length from earth plate) connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 5 of schedule Part-I

Note:- (i) Cost of copper earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

Supply and laying in trenches or in cable ducts HDPE DWC pipe of size 77mm(OD)x63mm(ID) alongwith connected accessories like couplers,bends,end caps etc for LT/HT cable protection complete all as specified and as directed.

Material and Labour for LED street light fitting class-I aesthetically designed COB LED ensures efficient optics and uniform distribution of light pressure die cast aluminium housing with heat resistant toughened glass with frame along with IP 66 protecion, pole dia 63 mm for 90 W hanging with side reflector with acrylic cover and accessories with brackets made up of light grade GI Pipe 32mm bore,1.5m long bend to shape including MS clamps,nuts,bolts and washers etc complete all as specified and as directed. Make:- Crompton Greaves Cat Part No. LSTP-90-CDL-M of wattage 90 or equivalent in Bajaj/ Philips /Havells

Supply, install, testing & commissioning of Diesel Engine Driven silent, generating set 62.5 KVA water cooled radiator type, 415 volts, 3 Phase 4 wire, 0.8 PF, 50Hz, brushless, 1500 RPM, self excited, self regulated, AC, and conforming to condition as per IS:10001/10002 Cummins Engine and alternator rating 62.5 KVA / 50 KW as per IS ; 13364 complete with relay panel and switch gears for Automatic Starting on Main Failure Control panel having meter and sound proof canopy as per CPCB norms complete with foundation ( as per OEM design) with acoustic enclosure, 12 volts, starting system with suitable batteries, turbo charger etc. of capacity 62.5 KVA DG Set complete all as comprising the following. Make:- CUMMINS/KOEL/KIRLOSKAR/Geaves Power / Cater pillar.

(a) ALTERNATOR : Standard design alternator rated at 62.5 KVA net out put at site after considering all derating factors, 4 wire 415 volts , 50 cycles, 1500 RPM , self excited self regulated, screen protected drip proof IP-23 enclosure,brushless design with hub and sealed ball/roller bearing with winding on each pole faces,insulating class "H" band of voltage regulation +/- 3% tolerance,revolving field type. (b) DIESEL ENGINE: Adequate capacity diesel engine suitable to above alternator, water/liquid cooled, to drive independently above alternator and after considering derating as per site conditins directly coupled to alternator through flexible coupling or closed coupling,multi-cylinder, multi-stroke,direct injection, cold starting,1500 RPM as per relevant ISI/BS-5514 with an over load capacity of 10% for one hour in any 12 hours continuous running complete with standard accessories all as specified and required for safe running and operation,salient features of accessories shall be as under:- (i) Fly wheel housing (ii) Air cleaner dry type (iii)Fuel filter (iv)Fuel injection system including injection pump,solenoid switch noozle as per manufacture's specification (v) Lubricating oil filter,bypass filter,oil cooler (vi) Lubricating oil pump (vii) Turbocharger (viii) Radiator for water cooling (coolant) (ix) 12 volts starting system consisting of batteries of capacity as recommended by manufacture,battery connections with copper leads and with lugs of adequate size,initial charging of batteries,battery charger/generator with regulator,starter motor,starter gear,start and stop push bottoms,ignition key and switch. (x) Residential type exhaust silencer complete with exhaust pipe of 100mm to 125mm dia upto outside the acoustic enclosure,all covered with glass wool wrapped with aluminium foil fo 28 SWG adequate to create draft for safe exhaust without transfering vibrations to building/wall,flexible exhaust pipe complete. (xi) Engine protection devices including audio and light indiators and cut off system during following instances:- (a) Low lubricating oil pressure (b) High coolant/water temperature (c) Over speeding of engine (xii) Radiator cooling system comprsing of radiator,radiator fan belt, water pump with belts, thermostat (xiii) Hour meter (xiv) RPM meter with indicator

(xvi) Water temperature gauge,oil pressure gauge,oil temperature gauge. (xvii) Fuel hoses (xviii) Fuel tank/day tank with level indicator,stop cock,drain plug/valve,breather inlet and outlet connection and all fuel supply lines as required at site and as per manufactures instructions including return and overflow as well as fuel filling arrangement with piping. (xix) Air intake system (xx) Hand priming pump (xxi) Common,base frame of sturdy design suitable for anti vibration mounting (xxii) Permanent concrete foundation for engine and alternator as per manufactures instruction including base concrete and escavation for generator foundation. (xxiii) Exhaust system (xxiv) Protection guard for safety of person from moving/rotating parts of generating sets and coupling.Electronic governor & Electronic Voltage regulator. (c) Acoustic insulated enclosure /canopy for generating Set :- (i) Acoustic canopy shall be corrosion resistant and shall be modular construction. (ii) Made up of 16 SWG CRCA sheet and pre treated with zinc phosphate prior to polyster powder coated paint, close fit type compact enclosure. (iii) Fasteners, hinges shall be stainless steel. (iv) Gasket shall be EPDM quality. (v) Doors shall be sliding type or hinged type (vi) Sound proofing shall be made with a high quality insulation rock wool as per IS -8183 and of suitable thickness not less than 75mm and having very high density not less than 64 Kg and shall withstand temperatures upto 450 C and rock wool covered with perforate sheets. (vii) A specially designed residential silencer with the capacity to control engine exhaust noise along with associated piping mounted inside the aquatic enclosure. (viii) Control panel shall have viewing windows. (ix) Emergency spot button shall be easily accessible. (x) Provision of electrical illumination inside canopy /enclosure. (xi) High temperature safety for enclosure. (xii) Locking arrangement for all doors and windows with duplicate keys. (xiii) Lifting points shall be provided on base frame. (xiv) Access to fill radiator from outside the canopy.

(xv) Specially designed as per manufacturer's standard alternators are to be provided with central or side door to entry into canopy and exist from canopoy. (xvi) Adequate ventilation shall be provided to meet the air requirement to engine and alternator. (d) Anti vibration foundation pads: A set of suitable size and suitable capacity anti vibration pads as required for Generator and enginer assembly shall be provided. ( Make : Dunlop or equivalent as approved by GE) (e) Barrel Pump : A barrel pump , rotary type hand pump including 15 mtr long braided hose pipe shall be provided for transferring diesel/oil from bulk storage /barrel to the day tank. (f) Tools : As per manufacturer's specifications. (g) Documents: Standard documents as per manufacturer specification such as maintenace and operating manual , parts catalouge , display charts such as maintenance and oil change chart/ boards ( for generator and diesel engine ) and log book shall be submitted to Enginerr- In -charge Note : (i) Temperature in the canopy/ compartment shall be less than 5 degree C . It shall adhere to mandatory noise regulation norms. It shall be approved and guaranted by engine manufacturer. Canopy and insulation shall be suitable for tropical climate. DG set shall comply noise limit 75 db at 1m distance. Contractor shall obtain a copy of approval certificate from any of the institutions approved by Government of India, CPCB from dealer and shall submit to Engineer- In - Charge. (ii) Factory inspection mandatorily to be carried out by rep of Accepting officer. (iii) 12 hours continuous testing of DG Set at diffrent loads, will be carried out twice in front of Engineer-in-Charge and IEM respectively. The Cost of disel and testing equipment is deemed to be included in the quoted rate. (iv)The capacity of generating set shall be net after all derating factors as per relevant IS design.

Supply and Fixing of indoor LT Panel of suitable size with following specifications. Fabrication Details : CPRI approved Main frame 2mm thick CRCA sheet, partition sheets / covers / doors of 2 mm thick CRCA sheet, gland plates 2 mm thick MS sheet (undrilled), base frame on ICMS channel with provision of incoming and outgoing cable entry at the bottom for outdoor installation, free standing floor mounted with degree of protection IP 54 and locking arrangements. Bus bar details : Material shall be alluminum bus bar TPN 415 Volts, sleeving heat shrinkable type, with bus bar sizes for phase 50mmx12mm aluminium Flat, neutral 50x12mm aluminium flat and bus bar support of epoxy type. Painting Detais : Pillar box shall be powder coated and painted with two coats of synthetic enamel spray paint over a coat of redoxide primer.

Accessories for LT Panel :- (a) Incomer:- MCCB - 250A of make: L&T, Cat No.CM90634OOPO -2 nos (01 No for Main Supply and 01 No for DG Supply) and 250A 4 pole , Change over switch of Make:L&T, Cat No. CO32500OOOO -1no. (b) Outgoing:-(i) 125A, 3 pole,MCCB of make: L&T, Cat No.CM90678OOLO -3 nos (02 Nos for 02 Pump sets and 01 No as standby). (c) 63A, 3 pole,MCCB of make: L&T, Cat No. CM97894OOJ2 -05 nos (02Nos for 02 Pump sets, 01 for security lights, 01 for Bldg and 01No as standby). (d) Automatic Star-delta starter suitable for Pump set of 30HP - 02Nos. (e) Automatic Star-delta starter suitable for Pump set of 15HP - 02Nos. (f) Digital type 3 Phase multifunctional meter of class-5, 5A in the incomer- 02Nos (g) Digital Ammeter - 07 No(0-500A),(Flush type) and Indication Lamps (LED) - 07 sets. Make: L&T /Binay /Elmeasure Note: (i) All MCCBs should be adjustable over load type 70-100%, with thermal magnetic release Ics=100%Icu complete all as directed. (ii) Quoted rate is deemed to be includes cost of Change over switches, MCCBs, Volt meter, Ammeter, Starters and idiction lamps connected wiring with necessary spreader links, lugs, glands and connecting of cables complete all as specified as per site conditions and as directed by Engineer-in-Charge.

Supply and laying armoured communication cable of 0.5 sqmm of ten pair complete all as specified and as directed. Make:- Polycab/Unicab/Havells/Finolex/Fort Gloster/INCAB/Nicco/CCI

Subtotal

RAMESH ASSOCIATES

SALCON ENGINEERS AND FABRICATORS

Prasur Electricals & Engineering Co.

Sree Tirumala Enterprises

P NAIDU