Construction of DFO Residence

Earth work in excavation in hard soil or gravelly soil including dressing and levelling the bed complete wth all.

Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision).

Providing & Applying of Pre-Construction Anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall and floor about 300mm aprt deep enogh to reach the soil below and chemical emulsion (PREMISE,IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5 ltr water) pumped these holes to soak the soil @ 1 ltr soulation of each hole as per manufactures specification and the holes should be pluged with filling materials including cost of all material,labour conveyance and hiring charges of machinaries all taxes as per direction of EIC.

Plain cement concrete (1:3:6) nominal mix in foundation as per Drawing and Technical Specification

Fly ash Brick Masonry in Cement Mortar (1:6) using bricks of size (23 Cm. x 11 Cm. x 8Cm.) in foundation and plinth

Fly ash Brick Masonry in Cement Mortar (1:6) using bricks of size (23 Cm. x 11 Cm. x 8Cm.) in foundation and plinth

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Column Footing / Pile cap Column Base

Column Above PL

II)-Plinth Bend/Grade Beam

Rcc Chajja

Roof Slab

Roof Beam

Lintel Band

Stair case

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in Ground Floor

12mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment. in Ground Floor

16mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm Full body vertified floor tile of with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only )

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm Glaze vertified floor tiles of matt finish with veilcraft (VC ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of 600mm x 300mm Ceramic wall tiles having thickness 6.5mm to 7.0 mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

Supplying, fitting & fixing of 600mm x 300mm Ceramic wall tiles having thickness 6.5mm to 7.0 mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

Dressed seasoned sal wood work framed and fixed (wrought and put up) in frames of doors, windows & ventilabours

Factory made 30mm/32mm flush door shutter (nonsal hard wood framefixed with 4mm BWR ply on both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect

Factory made single leaf rigid PVC Door sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)

Providing and fixing factory made 2 track 2 panel UPVC white colour sliding window comprising of UPVC multi-chambered frame having section Frame 58mm x 49mm, Window sash: 37mm x 61mm, made out of lead free green profiles with corners fusion welded, fully reinforced with Galvanized steel 1.5/2.0 mm. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size. The sash will be fitted with 5mm clear glass ( float ).complete in all respect as per specification and direction of the Engineer in Charge. etc. complete

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. in Ground Floor

Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surface in Ground Floor

Painting two coats with any approved colour of weather seal coat to out side surface of wall in Ground Floor

Priming one coat with approved Red Oxide Primer on Steel work in Ground Floor

Fly ash Brick Masonry in Cement Mortar (1:6) using bricks of size (23 Cm. x 11 Cm. x 8Cm.) in foundation and plinth

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying R.C.C Column

Roof Slab

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in Ground Floor

12mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor

16mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment. in Ground Floor

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. in Ground Floor

Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surface in Ground Floor

Painting two coats with any approved colour of weather seal coat to out side surface of wall in Ground Floor

ELECTRICAL & PH WORKS NOTE: Provide Materials of Civil / E.I. & PH work such as Cement- (Make: Ultratech/Dalmia) Rod- (Make: TATA/Jindal) Sanitary Pipe- (Make: Supreme/ Finolex) Sanitary Fittings- (Make: Cera/Jaguar) Electric Wire- (Make:-Finolex/Polycab / Havells) Electrical Fittings - (Make: Havells / Philips / Panasonic) Switch Board-(Make: Legrand / Anchor / Havells) Tiles- (Make: Kajaria/Johnson) Colour : (Make : Asian Paint / Berger / Nerolac)

Please Enable Macros to View BoQ information