ITI Paharipur

Amount

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm. laid over 87.50 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm. Top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc ( HSR 13.13).

Cement concrete 1:2:4 gola 10 cm X 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. ( HSR 13.64)

Precast terrazzo tiles of 20 mm minimum thickness in cement as specified below with marble chipps of size and colour as required laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry, between joints and over the base in floors, treads of steps and landings including rubbing and polishng. (b) In 50% white and 50% grey cement (HSR 14.44b)

Precast chequered tiles of 20 mm thickness in ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base of floors, treads of steps and landings. (HSR 14.45)

Kotah stone flooring minimum 25mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1;3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing (HSR 14.62)

Kotah stone 20 mm thick in skirting risers of steps, dados, pillars and wall facing (lining) in any pattern as specified laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66)

Laying and fixing vitrified/ceramic/Glazed tiles of any size of approved make in skirting/dado, pillars, wall facing, laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed withwhite cement slurry mixed with pigment to match the shade of tiles, (Tiles shall be supplied by the Department) (HSR 14.94 )

Laying and fixing Granite stone in all shades 15mm to 18mm thick in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone(Excluding the cost of granite stone) (HSR 14.96 )

12 mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

6 mm thick cement plaster 1:4 (HSR 15.50)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR 16.1)

Applying pink prier or aluminum priming coat on wood work including preparation of surface, knotting and stopping, etc. (HSR 16.2)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.7)

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work. (HSR 16.17)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (HSR 16.25)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Providing and laying two coats of exterior acrylic emulsion paint (HSR 16.79 (b) (Duplex , Asian, Nerolac etc.) (b) Ist Quality

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth eiht sand paper to get an even complete (J.K/ Birla make) (SHR 16.81)

Factory-manufactured paneled door or glazed window, shutters of commercial hard wood, such as hillock, champ, chikrassy and chaplash, etc., (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned), with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete fixed in position ( excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (b) 30 mm thick [HSR 17.90 (b)]

Factory-manufactured wire gauze door and window shutters of commercial hard wood such as hillock, champ, chikrassy and chaplash, etc. (non coniferous timber other teak, conforming to I.S. specification No.1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (HSR 17.92 i) 30 mm thick.

Factory manufactured solid flush door shutters, with block board core as per I.S. No.1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II , fixed in position, including iron hinges, screws, chocks/cleats and stops, etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (a) Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (HSR 17.93 ai) (i) 25 mm thick

Supplying and fixing glass panes including special metal sash putty of approved make (HSR 18.30 b) glass panes 4 mm thick, exceeding 40 sq dm areas

The Shiba Cooperative Labour and Construction Society Ltd

Sh. Jaivir Singh

Sh. Ashish Yadav