Water Supply and House Connection Scheme of Extended Area of Nagar Nigam Ayodhya Phase-2

DISTRIBUTION SYSTEM

HDPE Pipe PN-6 PE-100

110 mm dia

140 mm dia

160 mm dia

DI Pipe Class K-7

200 mm dia

250 mm dia

Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc.

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

350 mm dia

Carting of following size & type of pipes and specials to site of work and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete including testing of pipe lines and cutting of pipes.

HDPE Pipe PN-6 PE-100

110 mm dia

140 mm dia

160 mm dia

DI Pipe Class K-7

200 mm dia

250 mm dia

Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc.

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

350 mm dia

Excavation for pipeline work in ordinary Soil (loam, clay or sand) with lift up to 1.5 M and lead up to 50 M including filling back the excavated earth into the trenches with watering, ramming and disposal of surplus earth with in 50 M lead.

Supply of following sizes D.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc. complete as per relevant IS.

100 mm dia

125 mm dia

Interlocking Tile Road (40 % New interlocking tile 80 mm thick M 35 Grade and 60 % old serviceable tiles , Plain cement concrete in 75 mm thickness 1:6:12 cement :coarse sand: 40 mm stone aggregate in base)

200 mm dia

250 mm dia

Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc.

400 mm dia

Fire Hydrant 80 mm dia

450 mm dia

D. I. D/F Sluice Valve

Supply of following sizes D.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc. complete as per relevant IS.

100 mm dia

125 mm dia

Interlocking Tile Road (40 % New interlocking tile 80 mm thick M 35 Grade and 60 % old serviceable tiles , Plain cement concrete in 75 mm thickness 1:6:12 cement :coarse sand: 40 mm stone aggregate in base)

200 mm dia

250 mm dia

Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc.

Scour valve 100 mm dia

Fire Hydrant 80 mm dia

450 mm dia

Supply of all materials and construct following chambers as per type design with supply of all labour, T&P etc. complete.

Masonary Type

Fire Hydrant Chamber

Air Valve Chamber

Surface Box Type

Dismentling of following type of road and stacking of useful materials including supply of all materials, labour, T&P etc. complete.

BOE Road

C.C. Road

Bitumen Road

Interlocking

BOE Road (with 40 % New Bricks and 60 % old Undamaged serviceable bricks)

C.C. Road (with 150 mm PCC base of 1:4:8 cement: coarse sand: 40 mm Stone Aggregate and 100 mm Cement Concrete course of 1:1.5:3 cement: coarse sand: 20 mm Stone Aggregate)

L.T. Switchgear Panel Board

Carting of following sizes D.I.D./ F Sluice Valve and specials from departmental store to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. complete including supply of jointing materials.

Shifting of Existing house connection from old to new ditribution system including excavation laying and jointing for proper completion of work as per instructions of Engineer as per Dwg 12 (including road restoration)

Provision for following types of Culvert crossing along the alignment of pipe line complete as per instructions of Engineer ‐in ‐charge. (casing of pipe is done by concreting)

Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (100 Amps)

Estimated Rate Without GST but including labour cess in Rs. P

200 mm dia

300 mm dia

Making house connection should be done atleast 2 m inside the boundary wall with provision of tap from distribution line to outer wall of house with supply of 1 m above GL G.I. pipe ( 15 mm ) ( above ground ) & average 5 mtr. MDPE Pipe ( 20 mm) ( below ground) including specials saddle Tapetc. of suitable size T&P etc. including excavation laying and jointing for proper completion of work as per instructions of Engineer as per Dwg 12 (including dismantling and reinstatement of road)

In C.C. roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

In bituminous roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

In BOE roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

In C.C. Interlocking Tiles roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

In Kachcha roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

150 mm dia

In C.C. roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

In bituminous roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

In BOE roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

In C.C. Interlocking Tiles roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

In Kachcha roads

For 90 mm to 110 mm dia

For 125 mm to 160 mm dia

For 180 mm to 250 mm dia

300 mm dia

C.I. Single ball type Air Valve 50 mm dia

LAYING OF RISING MAIN

Supply of D.I. pipes (K-9)of following size/wall thickness with I.S. 8329/2000 or its latest amendments with jointing materials including FOR destination and all taxes and insurance and including all specials of rising main etc. complete.

Scour Valve 100 mm dia

For 350 mm to 500 mm dia

100mm dia DI K-9

200mm dia DI K-9

Excavation of earth for pipe line trenches in ordinary soil (loam, clay or sand) with lift upto 1.5 and lead upto 50M filling back the earth into trenches including watering, ramming and disposal of surplus material with in 50M lead etc. complete.

Carting of following sizes D.I. pipes class K-7/9 and specials to the site of work loweering them in to trench and laying true to alignment including testing of pipeline but excluding cost of trenching and cutting of pipes etc. for making of length but including making joints.

Nala/Culvert Crossing ( width ‐3.5 m)

Scour Valve 100 mm dia

For 350 mm to 500 mm dia

100mm dia DI K-9

200mm dia DI K-9

Dismentling of following type of road and stacking of useful materials including supply of all materials, labour, T&P etc. complete.

BOE Road

C.C. Road

Bitumen Road

Interlocking

BOE Road

C.C. Road

Interlocking

Supply of all material, labour, T&P and construct RCC thrust blocks at the bends etc. complete.

300mm dia DI K-9

Supply of following sizes D.I.D./F sluice value as per I.S. 14846:2000 working presure 10 kg/cm^2 F.O.R. destination and all texes and insurance

Supply of following sizes D.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc. complete as per relevant IS.

100 mm dia

200 mm dia

Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc.

350 mm dia

Carting of following sizes D.I.D./F Sluice Valve and specials to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. complete including supply of jointing materials.

Supply of following sizes D.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc. complete as per relevant IS.

100 mm dia

200 mm dia

Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc.

350 mm dia

Supply of all material labour, T&P etc. Required and construct of Sluice Valve Chamber Masonry Type as per type design.

Shifting of Existing house connection from old to new ditribution system including excavation laying and jointing for proper completion of work as per instructions of Engineer as per Dwg 12 (including road restoration)

Provision for following types of Culvert crossing along the alignment of pipe line complete as per instructions of Engineer ‐in ‐charge. (casing of pipe is done by concreting)

Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (100 Amps)

Provide all materials labour T&P etc. complete and construct Pump house size (3.6x3.0x3.0)m Chlorinating room size (2.60x1.80x3.0)m as per departmental type design and drawing (drawing No‐D‐2) and as per the specifications for civil work given in the bid document including supply of all material labour and T&P etc complete as per instructions of Engineer ‐in-charge.

Construction of O.H.T.

balcony to top dome resting on an RCC platform (75cmx75cm and 10cm thick) projecting from top ring beam and one aluminum ladder inside the tank body (from manhole in top dome to bottom as per design and specification approved by Engineer in charge. 1 m wide R.C.C. M-30 balcony around the tank at the junction point of vertical wall and conical wall. Proper railing of 20mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, around the balcony, at each landing and from landing with top ring beam upto manhole on the top dome and at the periphery of top dome. The G.I. Pipes will be supported on M.S. posts made of or RCC post, spaced at intervals not more than 1.5m.Proper ventilator at top dome in circular shape of 1.2 m dia. along with an R.C.C. cover of minimum 1.50m dia and with mosquito net of standard quality along with expanded metaled jali between top dome and RCC cover. Water level indicator fabricated with good quality minimum 45mm x 45mm section, of 3mm thick M.S. plate should have a clear width of minimum 25cm painted with good paint with brass wire rope, pulley, copper ball float, pointer etc. Lightening conductor should be as per I.S.S.2309 or its latest amendments of latest electricity rules. C.I. manhole cover of min 60x60cm size with locking arrangement, Supply, fixing & jointing of D.I.D./F Pipes (for inlet, outlet, washout and overflow pipes) and specials, duck foot bend and fixing of the sluice valve at outlet and wash out pipe with all specials; construction of sluice valve chamber, floor and apron with semi circular drain around the apron with 25mm PCC 1:2:4 over 75 mm PCC 1:4:8, Apex painting on outer surface of OHT, painting on MS ladder, railing, vertical pipe etc. as per approved m

TOTAL AMOUNT In Words Without GST but including labour cess in

Zone 3, 2100Kl Capacity / 24 M staging

Zone 4, 2400Kl Capacity / 24 M staging

Zone 5, 1900Kl Capacity / 24 M staging

Zone 5 A, 2500Kl Capacity / 24 M staging

Zone 6, 2500Kl Capacity / 26 M staging

From 100 mm to 450 mm

450mm dia DI K-9

Provision for Installation of Product pipes by Auger boring method including making of entry and exit pits upto 3 mtr depth, all related civil works like excavation etc. lowering of pipe segments in the jacking pit, laying jointing of pipeline through jacking process as per the instruction of Engineer-in-charge all complete.

Zone 2, 1100Kl Capacity / 22 M staging

Complete trail Run & operation of above Zone including Scada system with 02 year comsumable items from complition e,g Sodium Hypochloride, Sim & internet rechrage etc.

Automation of New/Existing OHT and associated infrastructure like existing Tubewell, Related Valves, Chlorination System etc including repairing of existing equipments if necessary and Security Survillance cameras for Campus, Electromagnetic flowmeter of suitable size for DMA & OHT Outlet, power and control wiring , required RTUs and other accessories complete in all respect like earthing, cabling etc in each DMA in the way to accomplish 24x7 water supply to each water connection in each DMA of all zones with following items :- Flow meter in each DMA as per site requirement size or as per engineer in charge Plunger type flow control valve in each DMA as per site requirement size or as per engineer in charge SCADA Compatable Chlorinating System with separate controlled dosing in each DMA as per site requirement size or as per engineer in charge Residual Chlorine Analyser with enclouser & data transmission facility in UPS etc in each DMA Residual Pressure transmitter with enclouser & data transmission facility in UPS etc in each DMA Radar Type level transmitter as per site requirement size or as per engineer in charge 5 KVA UPS for Power backup of Transducers as per site requirement size or as per engineer in charge

Zone 1 A, 1700Kl Capacity / 22 M staging

Zone 1, 400Kl Capacity / 12 M staging

Zone 4, 600 Kl

CONSTRUCTION OF NEW BOUNDARY WALL, APPROACH ROAD AND GATE

Construction of boundary wall around pumphouse and O.H.T as per type design including supply of all Materials, Labour, Tools and Plants etc. complete.

Supply & fixing of 3.60 M & 1.20 M wide MS Gate including fabrication and supply of steel and construction of boundary pillars all complete.

Supply Earth filling in plingth including filling, dressing and ramming earth or sand or bajari or ballast or kankar or shingle.

Construction of interlocking approach road with both side brick Eadge and earth filling including supply of all materials, labour, tools and plants etc. complete.

Zone 5 A, 600 Kl

For 250 mm to 300 mm dia

Construction of chlorine dosing room including supply of all materials, labour, T & P etc. complete.

Repair existing P.H. including supply of all materials, labour, T & P etc. complete.

Girder with piller for rebore tube well including supply of all materials, labour, T & P etc. complete.

Repair of existing staff quarter including supply of all materials, labour, T & P etc. complete.

Zone 6, 650 Kl

Construction of MCS, centralized control room with lab and admin building including supply of all materials, labour, T & P complete.

Construction of staff quarter type 3 and type 4 including supply of all materials, labour, T & P etc. required for propoer completion of work.

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Drilling of Bore (Including water arrangement)

Drilling of 600 mm. dia bore from G.L. to 66 MBGL

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 200mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 150m BGL.

300 mm dia MSERW Plain/Slotted pipe from G.L. to 60 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

By Air compressor of 250 PSI capacity including T&P, labour and material required for completion of work, Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work.

By 3 Cusec OP Unit or Sutaible capacity including T&P, labour and material required for completion of work, Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work.

Hard Barricading works of Site

Electrical Logging of the Bore

Pumping Plant including Servo Stablizer and Chlorinating Plant 500 LPM/45 M Head - 02 Nos( One No for Rebore TW & One No for New TW)

CE / UL certified Intelligent smart energy meter

SITC of 500 LPM, 45 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 100 mm dia size 24 meter column pipe, 100 mm dia NRV, 100 mm dia CI D/F Bend 90 Degree, 100 mm dia CI A/F Tee, 100 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board & Supply & Installation of sutable size of armoured cable including lug etc.

SITC of Fully automatic Servo Voltage Stabilizer having capacity 20 KVA fully copper winding 3- phase A.C. Supply 50 Hz. Input voltage 200-480 volts, 3 Phase, A.C. Supply output voltage 415 Volts ± 1%, 3 Phase with T/F oil, Power cabling & earthing etc.complete in all respect.

Motor Opera

DI Pipe Class K-9

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Delivery pipes and specials as per details given below (or suitable size & length of delivery line & common header as per site condition and direction of engineer in charge) : 200 mm size individual delivery and 250 mm size common delivery with jointing material, valves, Tee, bends etc. a. 200 mm dia Dismantelling Joint-3 Nos b. 200 mm dia Bend- 3 Nos c. 200 X 250 mm Tee- 3 Nos d. 250 mm dia Duck foot Bend-1 Nos. e. 250 mm dia Common Header-15 M f. 250 mm dia Blind Flange-1 No. g. 250 mm dia Dismantelling Joint - 2 Nos h. 200 mm dia DIDF pipe - 15 Mt.

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

CE / UL certified Hydrostatatic type sub soil water level transmitter

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

Drilling of 500 mm. dia bore from 66 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

200 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

200 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Electrical Logging of the Bore

Barricading works of Site

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

Pumping Plant including Servo Stablizer and Chlorinating Plant 1200 LPM/55 M Head - 03 Nos( 03 Nos. for New TW)

SITC of 1200 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board & Supply & Installation of sutable size of armoured cable including lug etc.

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Reinstatement of following type road As per

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

SITC of Fully automatic Servo Voltage Stabilizer having capacity 40 KVA fully copper winding 3- phase A.C. Supply 50 Hz. Input voltage 200-480 volts, 3 Phase, A.C. Supply output voltage 415 Volts ± 1%, 3 Phase with T/F oil, Power cabling & earthing etc.complete in all respect.

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

Drilling of 500 mm. dia bore from 66 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

Digital Soft starter (22 KW or suitable size as per site condition and direction of engineer in charge)

Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (125 Amps)

Electrical Logging of the Bore

Barricading works of Site

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

Pumping Plant including Servo Stablizer and Chlorinating Plant 1200 LPM/55 M Head - 03 Nos( 03 Nos. for New TW)

SITC of 1200 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board & Supply & Installation of sutable size of armoured cable including lug etc.

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

s. 3. Providing, laying, Spreading & Compacting graded stone aggregate to wet mix macadam. (150 mm thickness) 4. Providing & applying PrimeCoat with medium bitumen VG 10 on prepared surface spreading primer at the rate of 0.75 Kg./Sqm. 5.P/L of 40mm thick BC with 100-120 TPH batch type HMP Producing and Avg. Output of 75 TPH using crushed aggt. Of specified grading premixed with bituminous binder VG 30 @ 5.5 % 6.Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size 7. Providing all necessary barricating and road painting work.

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

For Zone - 03 (New TW- 02 No.) 1100 LPM, 55 M

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

Drilling of 500 mm. dia bore from 66 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

Pumping Plant including Servo Stablizer and Chlorinating Plant 1100 LPM/55 M Head - 02 Nos( 02 Nos. for New TW)

SITC of 1200 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board & Supply & Installation of sutable size of armoured cable including lug etc.

Electrical Logging of the Bore

Barricading works of Site

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

For Zone - 04 (New TW- 03 No.) 1300 LPM, 57 M

Pumping Plant including Servo Stablizer and Chlorinating Plant 1300 LPM/57 M Head - 03 Nos( 03 Nos. for New TW)

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Bitumen Road 1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-25 125 mm layer thickness. 2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thicknes

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

SITC of 1300 LPM, 57 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board etc & Supply & Installation of sutable size of armoured cable including lug etc.

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

Drilling of 500 mm. dia bore from 66 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

Digital Soft starter (30 KW or suitable size as per site condition and direction of engineer in charge)

Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (160 Amps)

Electrical Logging of the Bore

For Zone - 05 (New TW- 04 No.) 1200 LPM, 30 M

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

For Zone - 04 (New TW- 03 No.) 1300 LPM, 57 M

DI Pipe Class K-9

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Bitumen Road 1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-25 125 mm layer thickness. 2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thicknes

Pumping Plant including Servo Stablizer and Chlorinating Plant 1200 LPM/30 M Head - 04 Nos( 04 Nos. for New TW)

SITC of 1200 LPM, 30 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm, 30 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board etc & Supply & Installation of sutable size of armoured cable including lug etc.

SITC of Fully automatic Servo Voltage Stabilizer having capacity 25 KVA fully copper winding 3- phase A.C. Supply 50 Hz. Input voltage 200-480 volts, 3 Phase, A.C. Supply output voltage 415 Volts ± 1%, 3 Phase with T/F oil, Power cabling & earthing etc.complete in all respect.

Pumping Plant & Instrumentation Of CWR Zone 5

V.T. Pump- Motor Set

NIT No: 2485 / W-85 / 04 dt. 14.11.2025

Complete trail Run & operation of MCS including Scada system with 02 year comsumable items from complition e,g Sim & internet rechrage etc.

Provision of Digital Soft Starter to operate 40 HP motor (or suitable Capacity as per site condition and direction of engineer in charge) at 0.4 KV + 10% 3 phase, 50 Hz. A.C. and to control the above motors. It shall comprise of all protection devices as per latest I.S.S. specifications.

L.T. Switchgear Panel Board

Provision and laying of 2R X 3.5 core X 400 sq. mm. Aluminum Armoured Conductor Cable or of suitable sizes or as per site requirement with earthing material.for internal wiring i.e From T/F to Incoming of L.T. Control Panel with lugs etc

Provision of MS Girder for pump base etc.

Providing, fabricating & fixing of iron work e.g. ISMB, ANGLES, CHEQUARED PLATE, MS FLAT for base frame, panel stand, square bar for crane,cable tray, supports of ventilation ducting and items related to crane with bars of crane Chukkered Plate and Grills to cover the Gaps

Internal electrification of Pump House (CWR), Pannel room and campus with Light & Fan wiring and & other Necessary works.

SITC of Electro mechanical type chlorinating plant 0 to 30 LPH capacity pump

SITC of 3 Ton E.O.T. (Single girder) crane along with 12-15 meters span complete in all respect for pump house

Motor Operated sluice valve with Actuator for Pumps(200mm) (or suitable size as per site condition and direction of engineer in charge)

Motor Operated sluice valve with Actuator for Common Header (250mm) (or suitable size as per site condition and direction of engineer in charge)

Pumping Plant including Servo Stablizer and Chlorinating Plant 1300 LPM/57 M Head - 03 Nos( 03 Nos. for New TW)

SITC of DIDF PN 1.6 Reflux Valve 200 mm. dia

SITC of DIDF PN 1.6 Reflux Valve 250 mm. dia

CE / UL certified Intelligent smart energy meter

Automation of New / Existing OHT and associated infrastructure like existing Tubewell, Related Valves, Chlorination System etc including repairing of existing equipments if necessary and Security Survillance cameras for Campus, Electromagnetic flowmeter of suitable size for DMA & OHT Outlet, power and control wiring , required RTUs and other accessories complete in all respect like earthing, cabling etc in each DMA in the way to accomplish 24x7 water supply to each water connection in each DMA of all zones with following items :- Flow meter in each DMA as per site requirement size or as per engineer in charge Plunger type flow control valve in each DMA as per site requirement size or as per engineer in charge SCADA Compatable Chlorinating System with separate controlled dosing in each DMA as per site requirement size or as per engineer in charge Residual Chlorine Analyser with enclouser & data transmission facility in UPS etc in each DMA Residual Pressure transmitter with enclouser & data transmission facility in UPS etc in each DMA Radar Type level transmitter as per site requirement size or as per engineer in charge 5 KVA UPS for Power backup of Transducers as per site requirement size or as per engineer in charge

CE / UL certified Radar type Level Transmitter for CWR

CE / UL certified Smart Pressure Trans

mitter

SITC of indoor type floor mounted metal clad, 11 KV VCB panel with 01 No. 630 Amp. incoming VCB & 02 Nos 630 Amp.( or suitable sizes or as per site requirement) outgoing VCB totally enclosed breaker as per IS with all necessory protection and also should be compatible to SCADA operation

SITC of 160 KVA, 11/0.44 KV, 3 Phase copper wound transformer with tap changing arrangement

SITC of 3C x 70 Sq.mm size or suitable sizes or as per site requirement HT XLPE cable from 11 K.V.UPPCL metering panel to H.T. incoming Panel, and H.T. panel to Transformer complete in all respect.

SITC of LT Panel comprisiing of 03 No.(2T/F+1 No DG) 630 Amp ( or suitable sizes or as per site requirement) Incoming ACB Panel shall be mechanically and electrically interlocked completely and 01 Nos 400 Amp ( or suitable sizes or as per site requirement) MCCB as Outgoing and 01 Nos 100 Amp( or suitable sizes or as per site requirement) Outgoing for Auxiliary Load suitable capacity suitable for SCADA and all necessary protection equipments and metering equipment as per requirement.

SITC of Complete Set of Cable Jointing Kit (H.T. indoor outdoor type & LT indoor outdoor type )

Complete Earthing of required & essential equipmrnt/point with G.I. earth plate 600 mm X 600 mm X 6 mm thick & G.I. strip as per IS code of CWR, Sub station complete in all respect

SITC of CO2 type Fire extinguisher ISI mark confirming to IS 15683- 4.5 Kg, Electrical resistance sheet 1 Mtr. X 2 Mtr. (25 mm thick), tools & spanner set, Heavy Duty leak proof fire bucket 06 Nos. as per IS 2546/1974 & Fire bucket stand for 6 bucket at cwr & Sub station as per site requirement complete in all respect.

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

Installation of all equipments , power wiring of Electrical equipments with required size of cable tray, cable lugs,cable gland including paintaing work of all required equipment and commissioning of the pumping plants, sub station & Scada System.

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

Construction of foundation & fencing for both transformer & D.G. Set complete in all respect

NOC for substation from safety department

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

SITC of 12 Watt Solar Based LED light with GI Pole as per IS code

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

Drilling of 500 mm. dia bore from 66 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

Pumping Plant including Servo Stablizer and Chlorinating Plant 1100 LPM/55 M Head - 02 Nos( 02 Nos. for New TW)

SITC of 1200 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board & Supply & Installation of sutable size of armoured cable including lug etc.

Electrical Logging of the Bore

Barricading works of Site

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

For Zone - 04 (New TW- 03 No.) 1300 LPM, 57 M

Pumping Plant including Servo Stablizer and Chlorinating Plant 1300 LPM/57 M Head - 03 Nos( 03 Nos. for New TW)

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Supply of all materials labour T&P etc. complete and construction of R.C.C. (M30 Grade) CWR of with main components, excluding cost of soil testing. All the components of C.W.R will be casted in M30 concrete with cement, coarse sand and approved stone grit as per I.S. 11682 and I.S.456 Minimum depth of foundation below original ground level will be 4.5M Seismic effects and wind load should be taken into consideration as I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure (this area is in seismic Zone IV and high damage risk zone for wind) The above cast of C.W.R has been assumed that ,the

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

Complete Cabling for ZPS including all power & control cable of all equipments at ZPS and OHT

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

Fully Automation of CWR through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Security Serveillance IP Camera with recorder complete in respect

Electrical Logging of the Bore

For Zone - 05 (New TW- 04 No.) 1200 LPM, 30 M

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

For Zone - 04 (New TW- 03 No.) 1300 LPM, 57 M

DI Pipe Class K-9

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Bitumen Road 1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-25 125 mm layer thickness. 2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thicknes

For Zone - 06 (New TW- 03 No.) 1300 LPM, 57 M

SITC of 1200 LPM, 30 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm, 30 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board etc & Supply & Installation of sutable size of armoured cable including lug etc.

SITC of Fully automatic Servo Voltage Stabilizer having capacity 25 KVA fully copper winding 3- phase A.C. Supply 50 Hz. Input voltage 200-480 volts, 3 Phase, A.C. Supply output voltage 415 Volts ± 1%, 3 Phase with T/F oil, Power cabling & earthing etc.complete in all respect.

Pumping Plant & Instrumentation Of CWR Zone 5

V.T. Pump- Motor Set

2400 LPM 40M head Clear Water 1450 RPM, surface discharge, self water lubricated, Bottom Suction size 6 M long column Assembly (Column Pipe shaft & Rubber spider) Discharge head, Top shaft, rachet to prevent reverse rotation, suitable to couple with 3 phase 4 Pole, Vertical hollow shaft 1450 RPM squirrel cage 415 V ± 6% 50 Hz, AC, Motor etc. (or suitable head, H.P, RPM of pump motor & size & length of coloumn pipes as per site condition and direction of engineer in charge)

For Zone - 07 (New TW- 04 No.) 1100 LPM, 30 M

Complete trail Run & operation of MCS including Scada system with 02 year comsumable items from complition e,g Sim & internet rechrage etc.

bearing capacity of soil has been taken as 8 M.T.sqm. Proper ventilator at top dome in circular shape of 8 m dia. along with an R.C.C. cover of minimum 1.50m dia and 7.5 cm thickness, pillar of ventilator should be minimum 50 cm dia.The space between top dome and R.C.C. cover should be covered with mosquito net of standard quality along with expanded metaled jali.

Provision of Digital Soft Starter to operate 40 HP motor (or suitable Capacity as per site condition and direction of engineer in charge) at 0.4 KV + 10% 3 phase, 50 Hz. A.C. and to control the above motors. It shall comprise of all protection devices as per latest I.S.S. specifications.

L.T. Switchgear Panel Board

Provision and laying of 2R X 3.5 core X 400 sq. mm. Aluminum Armoured Conductor Cable or of suitable sizes or as per site requirement with earthing material.for internal wiring i.e From T/F to Incoming of L.T. Control Panel with lugs etc

Provision of MS Girder for pump base etc.

Providing, fabricating & fixing of iron work e.g. ISMB, ANGLES, CHEQUARED PLATE, MS FLAT for base frame, panel stand, square bar for crane,cable tray, supports of ventilation ducting and items related to crane with bars of crane Chukkered Plate and Grills to cover the Gaps

Internal electrification of Pump House (CWR), Pannel room and campus with Light & Fan wiring and & other Necessary works.

SITC of Electro mechanical type chlorinating plant 0 to 30 LPH capacity pump

SITC of 3 Ton E.O.T. (Single girder) crane along with 12-15 meters span complete in all respect for pump house

Motor Operated sluice valve with Actuator for Pumps(200mm) (or suitable size as per site condition and direction of engineer in charge)

Motor Operated sluice valve with Actuator for Common Header (250mm) (or suitable size as per site condition and direction of engineer in charge)

Pumping Plant including Servo Stablizer and Chlorinating Plant 1300 LPM/57 M Head - 03 Nos( 03 Nos. for New TW)

SITC of DIDF PN 1.6 Reflux Valve 200 mm. dia

SITC of DIDF PN 1.6 Reflux Valve 250 mm. dia

CE / UL certified Intelligent smart energy meter

Electromagnetic flowmeter of size: 250mm for common header (or suitable size as per site condition and direction of engineer in charge)

CE / UL certified Radar type Level Transmitter for CWR

CE / UL certified Smart Pressure Trans

mitter

Pumping Plant including Servo Stablizer and Chlorinating Plant 1100 LPM/30 M Head - 04 Nos( 04 Nos. for New TW)

SITC of 160 KVA, 11/0.44 KV, 3 Phase copper wound transformer with tap changing arrangement

SITC of 3C x 70 Sq.mm size or suitable sizes or as per site requirement HT XLPE cable from 11 K.V.UPPCL metering panel to H.T. incoming Panel, and H.T. panel to Transformer complete in all respect.

SITC of LT Panel comprisiing of 03 No.(2T/F+1 No DG) 630 Amp ( or suitable sizes or as per site requirement) Incoming ACB Panel shall be mechanically and electrically interlocked completely and 01 Nos 400 Amp ( or suitable sizes or as per site requirement) MCCB as Outgoing and 01 Nos 100 Amp( or suitable sizes or as per site requirement) Outgoing for Auxiliary Load suitable capacity suitable for SCADA and all necessary protection equipments and metering equipment as per requirement.

SITC of Complete Set of Cable Jointing Kit (H.T. indoor outdoor type & LT indoor outdoor type )

Complete Earthing of required & essential equipmrnt/point with G.I. earth plate 600 mm X 600 mm X 6 mm thick & G.I. strip as per IS code of CWR, Sub station complete in all respect

SITC of CO2 type Fire extinguisher ISI mark confirming to IS 15683- 4.5 Kg, Electrical resistance sheet 1 Mtr. X 2 Mtr. (25 mm thick), tools & spanner set, Heavy Duty leak proof fire bucket 06 Nos. as per IS 2546/1974 & Fire bucket stand for 6 bucket at cwr & Sub station as per site requirement complete in all respect.

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

Installation of all equipments , power wiring of Electrical equipments with required size of cable tray, cable lugs,cable gland including paintaing work of all required equipment and commissioning of the pumping plants, sub station & Scada System.

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

Construction of foundation & fencing for both transformer & D.G. Set complete in all respect

NOC for substation from safety department

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

SITC of 1100 LPM, 30 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm, 30 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board etc & Supply & Installation of sutable size of armoured cable including lug etc.

Transportation of Rig Machine & its T&P/equipment's to the site of work including loading & unloading, baricating, erection & dismantling etc.

Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc.

Repairing of existing OHT including supply of all required material labour T&P with painting of OHT complete

E&M Work

For Zone - 01 (New TW- 01 No.+ Rebore TW - 01 No.) 500 LPM, 45 M

Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT

Fully Automation of T/W through SCADA complete in all respect e.g. Supply installation Testing of all Required RTU, Wireless Communication Module, Control Panel, PLC, Programming, Software, Licences, wiring etc complete in all respect including mobile based app development and interconnection with LCS, MCS Central Control Room Ayodhya and Central Control Room Lucknow as per 24x7 water supply requirements

Drilling of 450 mm. dia bore from 66 MBGL to 100 MBGL

Drilling of 450 mm. dia bore from 101 to 165 MBGL.

Lowering Of Tubewell Assembly & Shrounding of TW by Pea Gravel

For Zone - 02 (New TW- 03 No.) 1200 LPM, 55 M

Drilling of 500 mm. dia bore from 66 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 60 MBGL to 100 MBGL

150 mm.dia MSERW Plain/Slotted pipe from 101 MBGL to 150 MBGL

Supply including Transportation upto site, loading & unloading of TW assembly of MSERW Pipe.

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16 mm thick, 1 no M.S. well cap 12mm thick , required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mm thick , 1 no M.S. bail plug , required center guide etc comp in all respect.

Pea Gravel

Supply of Pea Gravel Size 1.6mm to 4.80mm of Lalkuwan quarry duly screened , washed and proper stacking at site.

Development of Tubewell

Repair of water work campus, boundary wall supply of all materials, labour, T & P etc. required for propoer completion of work and repair of boundary wall.

Chemical and Bacteriological test of water sample from departmental approved lab

Drilling of 500 mm. dia bore from 101 to 165 MBGL.

Pumping Plant & Instrumentation Of CWR Zone 7

Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (160 Amps)

Electrical Logging of the Bore

For Zone - 05 (New TW- 04 No.) 1200 LPM, 30 M

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (150mm)

SCADA compatable chlorinating System

For Zone - 04 (New TW- 03 No.) 1300 LPM, 57 M

DI Pipe Class K-9

ted Actuator with Sluice Valve (100mm)

CE / UL certified Pressure Transmitter

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

CE / UL certified Electromagnetic flowmeter of size:100mm

Digital Soft starter (15 KW or suitable size as per site condition and direction of engineer in charge)

Bitumen Road 1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-25 125 mm layer thickness. 2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thicknes

SITC of 1200 LPM, 30 m head or suitable head as per site condition and direction of engineer in charge 2900 rpm, 30 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), TW Housing Cover (Dumdum), earthing, painting, Toolset, Power wiring, pump house internal and external wiring with concealed, 3 Tonne chainpully block P-type indef make and all pumping plant accessories with nut bolts and rubber packing, Kitkat, MCCB, Sunmica wooden board etc & Supply & Installation of sutable size of armoured cable including lug etc.

SITC of Complete Cable Jointing Kit (H.T. indoor outdoor type & LT indoor outdoor type )

Pumping Plant & Instrumentation Of CWR Zone 5

For Zone - 08 (New TW- 05 No.) 1200 LPM, 30 M

For Zone - 07 (New TW- 04 No.) 1100 LPM, 30 M

Starter

Complete trail Run & operation of MCS including Scada system with 02 year comsumable items from complition e,g Sim & internet rechrage etc.

SITC of indoor type floor mounted metal clad, 11 KV VCB panel with 01 No. 630 Amp. incoming VCB & 02 Nos 630 Amp.( or suitable sizes or as per site requirement) outgoing VCB totally enclosed breaker as per IS with all necessory protection and also should be compatible to SCADA operation

Provision of Digital Soft Starter to operate 40 HP motor (or suitable Capacity as per site condition and direction of engineer in charge) at 0.4 KV + 10% 3 phase, 50 Hz. A.C. and to control the above motors. It shall comprise of all protection devices as per latest I.S.S. specifications.

L.T. Switchgear Panel Board

Provision and laying of 2R X 3.5 core X 400 sq. mm. Aluminum Armoured Conductor Cable or of suitable sizes or as per site requirement with earthing material.for internal wiring i.e From T/F to Incoming of L.T. Control Panel with lugs etc

Provision of MS Girder for pump base etc.

Providing, fabricating & fixing of iron work e.g. ISMB, ANGLES, CHEQUARED PLATE, MS FLAT for base frame, panel stand, square bar for crane,cable tray, supports of ventilation ducting and items related to crane with bars of crane Chukkered Plate and Grills to cover the Gaps

Internal electrification of Pump House (CWR), Pannel room and campus with Light & Fan wiring and & other Necessary works.

Pumping Plant including Servo Stablizer and Chlorinating Plant 1200 LPM/30 M Head - 05 Nos( 05 Nos. for New TW)

SITC of 3 Ton E.O.T. (Single girder) crane along with 12-15 meters span complete in all respect for pump house

Pumping Plant & Instrumentation Of CWR Zone 8

3100 LPM 41 M head Clear Water 1450 RPM, surface discharge, self water lubricated, Bottom Suction size 6 M long column Assembly (Column Pipe shaft & Rubber spider) Discharge head, Top shaft, rachet to prevent reverse rotation, suitable to couple with 3 phase 4 Pole, Vertical hollow shaft 1450 RPM squirrel cage 415 V ± 6% 50 Hz, AC, Motor etc. (or suitable head, H.P, RPM of pump motor & size & length of coloumn pipes as per site condition and direction of engineer in charge)

Provision of Digital Soft Starter to operate 50 HP motor (or suitable Capacity as per site condition and direction of engineer in charge) at 0.4 KV + 10% 3 phase, 50 Hz. A.C. and to control the above motors. It shall comprise of all protection devices as per latest I.S.S. specifications.

SITC of DIDF PN 1.6 Reflux Valve 200 mm. dia

SITC of DIDF PN 1.6 Reflux Valve 250 mm. dia

CE / UL certified Intelligent smart energy meter

Electromagnetic flowmeter of size: 250mm for common header (or suitable size as per site condition and direction of engineer in charge)

CE / UL certified Radar type Level Transmitter for CWR

CE / UL certified Smart Pressure Trans

mitter

Pumping Plant including Servo Stablizer and Chlorinating Plant 1100 LPM/30 M Head - 04 Nos( 04 Nos. for New TW)

SITC of 160 KVA, 11/0.44 KV, 3 Phase copper wound transformer with tap changing arrangement

SITC of 3C x 70 Sq.mm size or suitable sizes or as per site requirement HT XLPE cable from 11 K.V.UPPCL metering panel to H.T. incoming Panel, and H.T. panel to Transformer complete in all respect.

SITC of LT Panel comprisiing of 03 No.(2T/F+1 No DG) 630 Amp ( or suitable sizes or as per site requirement) Incoming ACB Panel shall be mechanically and electrically interlocked completely and 01 Nos 400 Amp ( or suitable sizes or as per site requirement) MCCB as Outgoing and 01 Nos 100 Amp( or suitable sizes or as per site requirement) Outgoing for Auxiliary Load suitable capacity suitable for SCADA and all necessary protection equipments and metering equipment as per requirement.

SITC of Complete Set of Cable Jointing Kit (H.T. indoor outdoor type & LT indoor outdoor type )

Complete Earthing of required & essential equipmrnt/point with G.I. earth plate 600 mm X 600 mm X 6 mm thick & G.I. strip as per IS code of CWR, Sub station complete in all respect

SITC of CO2 type Fire extinguisher ISI mark confirming to IS 15683- 4.5 Kg, Electrical resistance sheet 1 Mtr. X 2 Mtr. (25 mm thick), tools & spanner set, Heavy Duty leak proof fire bucket 06 Nos. as per IS 2546/1974 & Fire bucket stand for 6 bucket at cwr & Sub station as per site requirement complete in all respect.

CE / UL certified Electromagnetic flowmeter of size:150mm

CE / UL certified Surge protector for control panel

Installation of all equipments , power wiring of Electrical equipments with required size of cable tray, cable lugs,cable gland including paintaing work of all required equipment and commissioning of the pumping plants, sub station & Scada System.

CE / UL certified 7" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters

Construction of foundation & fencing for both transformer & D.G. Set complete in all respect

NOC for substation from safety department

Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket and all specials as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and stacking all complete.

Motor Operated sluice valve with Actuator for Common Header (300 mm) (or suitable size as per site condition and direction of engineer in charge)

SITC of DIDF PN 1.6 Reflux Valve 300 mm. dia

Automation of New/Existing OHT and associated infrastructure like existing Tubewell, Related Valves, Chlorination System etc including repairing of existing equipments if necessary and Security Survillance cameras for Campus, Electromagnetic flowmeter of suitable size for DMA & OHT Outlet, power and control wiring , required RTUs and other accessories complete in all respect like earthing, cabling etc in each DMA in the way to accomplish 24x7 water supply to each water connection in each DMA of all zones with following items :- Flow meter in each DMA as per site requirement size or as per engineer in charge Plunger type flow control valve in each DMA as per site requirement size or as per engineer in charge SCADA Compatable Chlorinating System with separate controlled dosing in each DMA as per site requirement size or as per engineer in charge Residual Chlorine Analyser with enclouser & data transmission facility in UPS etc in each DMA Residual Pressure transmitter with enclouser & data transmission facility in UPS etc in each DMA Radar Type level transmitter as per site requirement size or as per engineer in charge 5 KVA UPS for Power backup of Transducers as per site requirement size or as per engineer in charge

Electromagnetic flowmeter of size: 300 mm for common header (or suitable size as per site condition and direction of engineer in charge)

Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (250 Amps)

MCS (Master Control Station)

CE/UL & BIS Certified industrial grade LED MONITOR with latest configuration as per specification. 65"

CE/UL Certified 5 KVA UPS with batteries as per spec mentioned in technical bid document.

Full development version of required TAGS SCADA Software with coustomization of software for MCS as per requirement as per spec mentioned in technical bid documents.

CE/UL certified master control room PLC with redundant CPU & power supply at MCS in 1P54 enclouser as spec mentioned in technical bid documents.

GSM based 'wireless/Broadband/Equipment communication system for PLC capable to tranfer & received data & gather data from remote sites to control station, All accessories included signal enhancer antenna along with running expellees till DLP

CE/UL Ceritified Firewall for network protection total.

SURGE PROTECTOR FOR ETHERNET communication protection.

CE/UL certified industrial grade Ethernet Switch.

Reinstatement of following type road