Repair to panel board at Gen Shed of HQ 5 Sect AR at Chieswema

Amount

SCHEDULE ‘A’ PART-I (REPAIR TO PANEL BOARD)

Supply, installation, commissioning and testing of factory made (CPRI approved) LT floor mounted Cubical type panel Board of Suitable size In door type 415 Volts, 3 Phase, 4 wire, 50 Hz, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick CRCA sheet, to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and mild steel cable glands for each cable to make it weather and vermin proof. door hinged type, both side openable, air fins for ventilation, panel shall be mounted on MS Chanel of size (40 x 40 x 5 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) manufacturer instruction and as directed by Eng-in-Charge, notice board complete inclduing all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories :- Specification of panel board body structure : (a) Sheet material & thickness - 3.15mm thick CRCA Sheet. (b) Horizontal & vertical bus bar : 200 Amp (25x5mm) copper bus bar (c) Panel size : 2100mm x 2100 x 650 mm (LxBxD) (d) Base frame : 40 x 40 x5 mm of ht 75mm (e) All metallic structure of the panel will be proceeds between 7 tank for degreasing, derusting, activation & phosphating powder coated with seivemes gray colours (RAL-7032) (A) INCOMING Incomer module from mains. S&F of MCCB 4 Pole, 200 Amps ,415 Volt of breaking capacity 25 KA with Adjustable Thermal and fixed Magnetic, Spreader links 4 pole and extended rotary handle complete (Make :Legrand/ C&S/ Havells/ Siemens/ Crompton or equivalent) - 01 No. Incomer module from solar . S & F of MCB FP 63A 10kA, C Curve. Legrand/ C&S/Havells or equivalent) - 01 No. Incomer module from 100 KVA DG Set. S&F MCCB 4 Pole, 160 Amps ,415 Volt of breaking capacity 25 KA with Adjustable Thermal and fixed Magnetic, Spreader links 4 pole and extended rotary handle complete Legrand/Siemens/Havells or equivalent) - 01 Nos. Incomer module from 2 x 63 KVA DG Set . S&F MCCB 4 Pole, 125 Amps ,415 Volt of breaking capacity 25 KA with Adjustable Thermal and fixed Magnetic, Spreader links 4 pole and extended rotary handle complete (Make:Legrand/Siemens / Havells/Crompton or equivalent) - 01 Nos. Incomer module from 1 x 10 KVA DG Set. S & F of MCB FP 63A 10kA, C Curve.(Make : Legrand/Siemens/Havells/Crompton or equivalent) - 01 No.

Aien Meren Enterprises

M/s. Janki Enterprises