Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.2 L+₹1.3 L (3.21%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹46.6 L+₹4.7 L (11.3%)Rejected-Finance PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L3 | Rejected-Finance Highest bid quoted other then L1 | |
| 4 | L4₹47.6 L+₹5.8 L (13.7%)Rejected-Finance | L4 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹92,360
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri Ganganagar Cantt Rajasthan-335001
SPL REPAIR OF BLDG NO-132/05 ( OR LIVING ) OF 2 DOGRA AT MILITARY STATION SRI GANGANAGAR
2022_MES_555833_1
GE SGNR/ TOK-40 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Sri Ganganagar
D Class a (i) and for un-enlisted, refer NIT para 8.
6 documents required · 6 mandatory
₹500
GE Sri Ganganagar
₹92,360
Yes
23 Jan 2023
3 Oct 2022
3 Nov 2022
3 Oct 2022
1 Nov 2022
11 Oct 2022
Amount
Dismatiling brick tiles or terracing tiles, single layer on roofs and mud phuska complete all as specified and directed by Engineer - in - Charge.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)complete all as specified and directed by Engineer - in - Charge.
M&L for Roof treatment to RCC roof as follows :- (a) Cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections,cleaning joints,washing,drying and removing all dirt/dust to receive concrete padding/ plaster etc complete all as specified and directed by Engineer - in - Charge. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC , finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP based polymeric membrane,minimum weighing 3 Kg/Sqm reinforced with non woven polyster fabric (weight not less than 150 gms/Sqm) by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer-in-Charge. Makes:-STP, Dr Fixit, Sika Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/ as per site requirement and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only.The name of firm shall be got approved from GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarantee of treatment shall be for minimum 10 years reckoned from date of completion of whole work
S&F heat resistance tiles of size 300x300x10mm thick on roof slab of any colour approved over and laid including 15mm thick in CM 1:4.Techinical specification of roof tiles shall be as prer IS 4457:2007 complete all as specified and directed by Engineer - in - Charge. .Make: Johnson Endura , Kajaria, Orient
M&L for PCC 1:2:4 , type B-0 as in benching (gola ) making concave shape gola of 80mm radius at juctions of roof/terrace with parapets/sides walls complete all as specified and directed by Engineer - in - Charge.
Dismantling for floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in cm 1:6 all complete all as specified and directed by Engineer - in - Charge.
M&L 450x300x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including 10mm backing coat in CM 1:4. complete all as specified and directed by Engineer - in - Charge.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.
M & L machine cut kota stone slab flooring18-20mm thick (minimum -size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 aggregate complete all as specified and directed by Engineer - in - Charge.
M & L machine cut kota stone slabs as in vertical surfces such as risers of steps/vertical surfaces 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm of backing coat in CM 1:4, complete all as specified and directed by Engineer - in - Charge.
Demolition of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in - Charge..
M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius complete all as specified and directed by Engineer - in - Charge.
All as above S.No 15 but except bricks complete all as specified and directed by Engineer - in - Charge.
Taking down cement plaster including raking out joint, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.
M&L, 15mm thick rendering in CM 1:6 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.
M&L, 15mm thick rendering in CM 1:4 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement ccomplete all as specified and directed by Engineer - in - Charge.
M&L, 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.
M&L three coats of white wash to new surfaces on wall including preparation of surface complete all as specified and directed by Engineer - in - Charge.
M&L three coats of white wash to new surfaces on ceilings including preparation of surface complete all as specified and directed by Engineer - in - Charge.
M&L two coats of white wash to old surfaces on ceilings including preparation of surface complete all as specified and directed by Engineer - in - Charge.
M&L two coats of cement based paint over 2 mm thick wall putty on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M&L for Complete removal of existing treatment and applying two coat of cement base paint over 2mm thick wall putty on old surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M&L for Complete removal of existing treatment and applying two coats of oil distempering over 2 mm thick wall putty to old surfaces of wall including preparation of surface ccomplete all as specified and directed by Engineer - in - Charge.
M&L two coats of oil distempering over wall puty over a coat of primer on newly plastered surface including preparation of surface complete all as specified and directed by Engineer - in - Charge.
M&L one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engineer - in - Charge.
M&L one coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed by Engineer - in - Charge.
Taking down wooden/PVC/FRP chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer - in - Charge.
Taking down aluminium window/ventilators chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer in Charge
Taking down steel window/ventilators chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer in Charge
Taking down wooden chowkats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm and refixing the same in same opening each complete all as specified and directed by Engineer - in - Charge.
Taking down aluminium chowkats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm and refixing the same in same opening each complete all as specified and directed by Engineer - in - Charge.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, tower bolts and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed by Engineer - in - Charge.
S&F 10mm dia M. S round guard bars for steel windows complete all as specified and directed by Engineer - in - Charge.
S&F MS falt iron 25 x 6mm as in hold fast confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer in Charge
Cutting holes in brick (n.exc half brick) walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer - in - Charge.
S&F framed brackets of angles or tee with web and flange cut to shape, drilled and counter shunk for screw, including bending and welding angles as necessary gusset plates riveting rails, braces, running rails and guides and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165) all as specified and directed by Engineer-in-charge.
S & F pressed steel frames of frame size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed complete all as specified and directed by Engineer - in - Charge.
S & F pressed steel frames of frame size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed complete all as specified and directed by Engineer - in - Charge.
M&L 35mm thick factory made plain, framed pannelled shutters (any number of panels) with panels of timber flat on both sided (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed by Engineer - in - Charge.
M&L 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer - in - Charge.
S&F solid PVC Door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification &drawing no page 160 of SSR Pt II complete all as specified and directed by Engineer - in - Charge.
S&F Factory made Solid PVC door shutter 30 mm thick (style) consisting of solid panel wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded decorative olour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part I complete all as specified and directed by Engineer - in - Charge.
S& F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer - in - Charge.
S& F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws,tower bolt (02 Nos) etc. with Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer - in - Charge.
S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars,aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no.) suitable handle (2 Nos) and tower bolt (02 Nos) complete all as specified and directed by Engineer - in - Charge.
S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design /pattern, with approved standard section and fixed to the window /door with C.P brass/SS screw @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles including flyproof wire mesh. Note:- Design shall be approved by Engineer - in - Charge. Note :- Minimum thickness of powder coating shall not be less than 50 micron complete all as specified and directed by Engineer - in - Charge.
S&F aluminium 4 lever Mortice lock , vertical type, size 100 mm complete all as specified and directed by Engineer - in - Charge.
S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engineer - in - Charge.
S&F 150 alminium anodies barrel tower bolts of extruded sction and fixed complete all as specified and directed by Engineer - in - Charge.
S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer - in - Charge.
M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M&L two coats of synthetic enamel paint over a coat of red oxide primer on new surfaces of steel and steel based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer - in - Charge.
S & F 4 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in - Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engineer - in - Charge.
S&F drapery curtain rod 25mm dia, fancy type, fabricated out of mild steel sheet not less than 20 gauge, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated power coated natural color complete all as specified & directed by Engr-in-Charge.
Taking down eaves gutter or rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. complete all as specified and directed by Engineer - in - Charge.
S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 complete all as specified and directed by Engineer - in - Charge.
Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer - in - Charge.
Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer - in - Charge.
Taking down or up steel water tubing 25 mm dia bore of pipe and removal to store complete all as specified and directed by Engineer - in - Charge.
S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer - in - Charge.
Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer - in - Charge.
S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer - in - Charge.
Fixing only tubes, of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer - in - Charge.
Refixing old steel tubing and connections in new or old position (walls, ceiling, flooring etc).Bore of pipe in 25 mm. complete all as specified and directed by Engineer - in - Charge.
Supply and fix tubes medium grade steel tubing 25mm dia laid to walls floors etc complete all as specified and directed by Engineer - in - Charge.
Dismantling water tanks any type exc. 500 ltr but nexc 1000 ltr complete all as specified and directed by Engineer - in - Charge.
Dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (1000 Ltrs) capacity complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity complete all as specified and directed by Engineer - in - Charge.
S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer - in - Charge.
S&F 15 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer - in - Charge.
S&F in repair, vitreous china squatting pan "ORISSA" pattern white, of size 580x440mm with integral foot rest, CI 'P' trap etc complete all as specified and directed by Engineer - in - Charge.. Make Hindware, Parryware, Cera
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipecomplete all as specified and directed by Engineer - in - Charge.
Supply and fixing PVC low level dual type flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density, PVC connection 15 mm dia and 450mm long & bracket etc complete all as specified and directed by Engineer - in - Charge. Make Hindware, Parryware, Cera, Commander
S&F in repair for vitreous China urinals,half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engineer - in - Charge.
Supply and fix in repairs vitreous china wash hand basin counter shank with green/black granite slab to be cut and polished at site as per requirement and approved by Engineer-in-charge, fincluding brackets, 32mm bore brass chromium plated waste coupling & 32mm bore low density polythelene (LDPE) flush pipe of pressure 6Kgf/Sqcm (1.00M long,) including 15mm bore 450/600mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer-in-Charge. (Note : Granite shall be measured and paid seperately)
S&F in repair soap dish, vitreous china white complete all as specified and directed by Engineer - in - Charge.
S&F CP shower rose 125mm size and 15mm dia, fixed inrepairs complete all as specified and directed by Engineer - in - Charge.
S&F CP towel rail 600mm long fixed with CP brass screws complete all as specified and directed by Engineer - in - Charge.
S&F 15mm bore PVC connections, with PTMT nuts, of length 450/600mm complete all as specified and directed by Engineer - in - Charge.
M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and PCC blocks for hold fasts complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs chromium plated angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer - in - Charge.
Supply and fix chromium plated stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 20mm, fixed in repairs complete all as specified and directed by Engineer - in - Charge..
Supply and fix chromium plated stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 25mm, fixed in repairs complete all as specified and directed by Engineer - in - Charge..
Supply and fix in repairs chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer - in - Charge.
S&F in repair 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F in repairs15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engineer - in - Charge.
S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.
Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, complete all as specified and directed by Engineer - in - Charge.
S&F 75mm dia cast iron soil waste pipe and vent pipes in any lenth with or withot ears with cement joint laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.
S&F, 100 mm dia cast iron soil waste pipe and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.
S&F, 100 mm dia cast iron soil waste pipe and vent pipes in any lenth with or without ears with cement joints fixed to wall complete all as specified and directed by Engineer - in - Charge.
S&F 75mm dia cast iron soil waste pipe and vent pipes in any length with or withot ears with cement joint fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 75 mm bore dia CI bends (any radius) diminishing pieces or tapers complete all as specified and directed by Engineer - in - Charge.
S&F 75mm C I branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.
S&F 75mm CI branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.
S&F 100 mm C I bends (any radius) with duck's foot or heel rest complete all as specified and directed by Engineer - in - Charge.
S&F 100mm C I branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.
S&F 100mm CI branch pieces, doube (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.
M & L for 75mm thick cement concrete type C-2, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engineer - in - Charge.
M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.
Demolition of Cement concrete(reinforeced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer - in - Charge.
M&L for re-inforced cement concrete type B1, 1:2:4 (using 20mm graded agg in RCC for chajja, parapit wall slab etc.complete all as specified and directed by Engineer - in - Charge.
M & L for form work to the chajjas slab,beams and walls for rough finished surfaces of concerte flat not exc 200mm thick complete all as specified and directed by Engineer - in - Charge.
M&L for TMT bars 6 to 8mm dia and over cut to length bend to shape reqd incl crancking and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer - in - Charge.
M&L for TMT bars 10mm dia and over cut to length bend to shape reqd incl crancking and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer - in - Charge.
M&L for repair to steel cupboard fixed/fitted with wall including repair/replacement of hinges, hasp and staples, rods and locking arragements (overhauling in all respects), handles, hanging rods and two coats of sythetic enamel paint including preparation of old surfaces complete all as specified and directed by the Engineer in Charge
Demolition of cement concrete (unreinforced) any description and in any position for sunken portion (below or above ground level) complete all as specified and directed by Engineer - in - Charge.
M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge:- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. complete all as specified and directed by Engineer - in - Charge. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete all as specified and directed by Engineer-in-Charge. Make:- Dr. Fixit/Fosroc/STP Note: (i) PCC filling in sunken portion will be measured seperately.
M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed by Engineer-in-Charge.
M&L for Second class Clean sawn hard-wood Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed. in scantlings and for frame etc complete all as specified and directed by Engineer - in - Charge.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as specified and directed by Engineer - in - Charge.
S&F Continuous( piano) hinges , mild steel , bright finish or electro galvanised Width of flaps 30mm (when open) complete all as specified and directed by Engineer - in - Charge.
S&F in repair Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/with piano hinges, magnet cathers and handles to timber frame work complete as specified and directed by Engineer in Charge
M & L granite (of any type) work 20 mm thick (table rubbed and polished) in hand wash platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6.complete all as specified and directed by Engineer - in - Charge.
M&L for Providing RCC precast cement concrete Type B0 1:2:4 (12.5mm gragded aggregate) 40 mm thick Jallies (measured solid including all mouldings and frame) complete all as specified and directed by Engineer-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
M & L for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge. (Make of cable - Anchor/Havells) Note : Thickness of sunken box not less than 2.0mm minimum
All as per Srl item No -127 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge. (Make of cable - Havells/Anchor/Finolex)
All as per Srl item No -127 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. (Make of cable - Havells/Anchor/Finolex)
All as per Srl item No. 127 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge. (Make of cable - Havells/Anchor/Finolex)
All as Srl item No. 127 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge. (Make : Havells cat part no LUMILINEPLUSBS10WLED865SPCSS, Bajaj cat part no. BCLSB 10 WH, Crompton cat part no. LDL-10-CDL)
S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. (Make:Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part no.: BCLSBAL 20W CW ,Crompton cat part no. : CCS-100-20-65-HL2-DP-NWH)
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S&F in replacement decorative wall light fixture made up of poly carbonate suitable for 10 watt LED lamp complete all as specified and directed by Engineer - in - Charge.
S & F Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,With electronic driver (new style) 10 W upper PVC body all as specified and directed by Engineer - in - Charge (Make:Havells cat part no : HEXAFT10WLED857SSYMBOPC, Bajaj cat part no. BIBWP 10W LED, Crompton cat part no. LBHP-10-CDL)
S&F in replacement MCB protected Socket -25Amps in renewal with plastic box and plug top vertical din rail mount type suitable to operate at 240V current rating range 25A , 50Hz 1Ph, complied IS specification 13032 & 8623 complete all as Spd and directed by Engineer in Charge Make-Havells/Crabtree/HPL
S & F stepped type,single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge
S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in concealed PVC conduict dia 20mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : PVC cable and PVC conduit shall be ISI marked) ( Make of cable - Anchor/Havells/Finolex)
S & F in repairs sheet metal enclosure for double door BD made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. (Make -Indo Asian/Havells / Legrand)
S&F in repairs MCCB TP&N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. (Make -Indo Asian/Havells / Legrand)
S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. (Make - Indo Asian/Havells / Legrand )
S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. (Make - Indo Asian/Havells / Legrand )
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge
S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & IP 66, Lumen 100lm/w , surge protection 4kv deviceSupply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge (Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part no. BRLEP 25W LED WH, Crompton cat part no. LSTS-25-CDL-M)
S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 & IP 54, mechanical impact strength IK 09, cement spill protectorprotection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge (Make - Indo Asian/Havells / Legrand)
Supply & fixing in replacement of meter box of size (0.9mX0.9mX0.2m) , made out of CRCA mild steel sheet, thickeness 2.25 mm double door,single opening with lock arrangement and transparent glass for meter reading suitable for fixing 04 Electric meter & VTPN DB box including taking down existing electric meters , refixing them with two single core PVC copper conductor unsheathed wire multistranded 4 sqmm,properly painting on meter box complete and fixing in wall with suitable cutting,cement work etc all as specified and directed by engr in Charge
S&F metal body exhaust fan 300 mm sweep,900 ,230 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.(Make :- Orient/Havells/Crompton)
Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cables complete all as specified and directed by Engineer - in - Charge.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer - in - Charge.
Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed by Engineer - in - Charge.
Supply and filling in Sand for Cable protection complete all as specified and directed by Engineer - in - Charge.
Supply and lay standard size bricks subclass B type complete all as specifed and directed complete all as specified and directed by Engineer - in - Charge.
Supply and lay in replacement jointing and testing and commissioning in replacement of 25 Sqmm x4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
Note : Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
PAREEK AND COMPANY
M/S BUDHRAM BISHNOI
AYUSH BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .