REPAIR REPLACEMENT IMPROVEMENT OF PERIMETER HIGH MAST LIGHTS SECURITY LIGHTS,STREET LIGHTA AND REPLACING WITH LED LIGHTS INCLUDING ALLIED WORKS IN THE AOR OF GE (WEST) PATHANKOT

Amount

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection complete all as specified and directed.

All as per srl item No.1 here-in-before but 70 watt complete all as specified and directed

All as per srl item No.1 here-in-before but but 90 watt complete all as specified and directed.

All as per srl item No.1 here-in-before but but 100 watt complete all as specified and directed.

All as per srl item No.1 here-in-before but but 120 watt complete all as specified and directed.

Supply and fixing in replacement of LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with pact and corrosion resistant complete with driver and lamp complete all as specified and directed

All as per srl item No.6 here-in-before but 120 watt complete all as specified and directed.

Taking down old UNSV light fitting of any type and S&F LED High Bay light 120 W LED, CCT not less 6000K pressure die cast aluminium housing ,heat resistance toughened glass with frame IP 65 protection LED lumen efficacy not less then 120 lumen/watt, reflector lenses for uniform light distribution on each LED complete fixed on New bracket and making connections with provision of PVC insulated copper conductor (multistranded)FR cable of 1.5 Sq mm size in PVC conduit with clamps complete all as specified and directed. Make cat part No.Jaquar cat part No. LFLD02S0120XC or equivalent to Philiphs/ Wipro (Note:New bracket and PVC wire will be paid and measured separetly under respective item of schedule)

Supply and fixing in replacement of Driver suitable for LED street light /flood light/high bay light of 45,60,72/70 Watt as per sample complete all as specified and directed.

Supply and fixing in replacement of Driver suitable for LED street light /flood light/high bay light of 90,120,150 Watt as per sample complete all as specified and directed.

M&L for of bracket in replacement for fixing of street light fittings bend to shape, made out of 32 mm dia GI pipe medium grade upto 1.5 mtr long fixed with and including two sets of MS clamp made out of Flat iron of size 50x6 mm, fabricated to shape and fixed with nuts, bolts & washers & two coats of aluminum paint over and including a coat of red oxide primer complete all as specified and directed.

S&F of 3 core Aluminium conductor PVC insulated cable of size 6 sqmm FR multistrand 1100 volts grade complete all as specified and directed.

M&L for Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.

All as per srl item No. 5 here-in-before but depth exceeding 1.5 mtr and not exceeding 3 mtr complete all as specified and directed.

M&L for Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable punned down to 18 cm complete all as specified and directed. Note :- Punned thickness 18 cm shall be measured for payment.

M&L for Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid complete all as specified and directed.

M&L for Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, of cross-sectional area 16 Sqmm, 2 core including taking down of old UNSV cable complete all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, of cross-sectional area 10 Sqmm, 2 core including taking down of old UNSV cable complete all as specified and directed.

S&F in replacement of GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole complete all as specified and directed.

M&L for Prestressed concrete pole, 9.0 metres long 102mm x 152mm at top and 102 mm x 289 mm at bottom, class 10 in replacement including dismantling of old UNSV pole , numbering new pole and applying two coats of synethic enamel paint upto 1.5 mtr from top of coping in black and white strip alternately each 30 cm wide complete all as specified and directed (Note: Earth work including excavation ,Returning filing,PCC work,removing excated material will be measured and paid separetly under respective items of schedule)

M&L for PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) as in foundation of poles filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregate) as in foundation of poles/coping,stay etc complete all as specified and directed

M&L for factory made sheet metal enclosure of suitable size out door type fabricated out of 2.4 mm thick CRCA sheet powder coated dust and vermin proof having entry from lower side with cable gland for cable of size 10 Sq mm 2 core with aluminium bus bar single phase and nautral current carrying capacity of aluminium bus bar should be upto 63 Amps mounted on poreclain insulator complete with operating voltage 220 volts, 50 Hz including one number MCB of capacity 6 amp 'C' curve for street light mounted in sheet enclosure prewired with minimum 1.5 Sq mm copper conductor cable with lugs including locking arrangement complete and enclosure fitting on pole with clamps nuts, bolts and washers including making connection from Junction box to S/L fitting with 1.5 sqmm PVC insulated FR cable for phase, neutral and earth complete or all as specified and directed.

Supply and Fixing Automatic street light timer switch single phase 3kW, 230 V Swadeep-02EC 3 kW1P model as a pole mountable SMC enclosure consisting of Nature Switch-02 as the controlling unit, Power Contactor(s) & MCBs 16 Amps (both Input-Output) of suitable power rating and Copper wiring (min.10 sq.mm.) with proper lugs & terminal blocks. The SMC enclosure comes complete with open able door and mounting clamps. Enclosure is made of UV stabilized, FR grade special moulding compound and rust proof, electric shock proof Outdoor mountable conforming to IP56 complete all as specified and directed.

Supply and Fixing of Automatic street light timer switch single phase 3kW, 230 V Swadeep-02EC 3 kW1P model as a pole mountable SMC enclosure consisting of Nature Switch-02 as the controlling unit, Power Contactor(s) & MCBs 32 Amps (both Input-Output) of suitable power rating and Copper wiring (min.10 sq.mm.) with proper lugs & terminal blocks. The SMC enclosure comes complete with open able door and mounting clamps. Enclosure is made of UV stabilized, FR grade special moulding compound and it is Rust proof, Electric Shock proof, Outdoor mountable conforming to IP54 complete all as specified and directed.

Note:- for Item ser No 1 to 8 of sch part 'A' :- The LEDs used in the product shall be of reputed make like Citizen Japan / Nichia Japan with minimum LED efficacy of 130lm/W. The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs @ L70. The LEDs used in Street Light shall have CCT of ANSI Bin Warm White (between 5000-6500 K ) with CRI of 70. LEDs used must be tested as per EN62471 for Photobiological Safety of humans. The Input voltage range shall be 150V to 270V. The LED Street Light luminaire shall have secondary lens optics for optimum light distribution. The LED Driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED luminaire shall have minimum 3.2KV surge protection. The LED Street Light shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. The driver should be fully designed and manufactured in India .The letter of Association with LED manufacturer for LEDs used in the fixture should be submitted to ensure high quality led chips are used in the fixture. LM79,LM80 and phtobiological reports should be submitted.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 30,247.50). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 3% (Three percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

M/S RUDRA CONSTRUCTION CO

KEWAL SONS

M/S SATPAL AND BROTHERS

M/s. Aggarwal Engineers

M/S Vijay Punj Constructions