Loading…
Loading…
Tender Value
₹21.1 L
EMD Value
₹22,000
Closing Date
17 Oct 2026, 5:00 pmClosed
Public Works Department
Shri.GIRISH B DESAI EE PWD Division Chikodi
Construction of two classrooms for Government kannada higher primary school and upgraded High school in walakai village of chikodi taluka belagavi dist under HoA 8443(DMF) Deposite contribution for year 2026-27.
PWD/2026-27/BD/WORK_INDENT44628
PWD/2026-27/BD/WORK_INDENT44628
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Chikkodi
8 documents required · 8 mandatory
The Tenderer shall obtain any civil construction work the workdone certificate from financial year 2021-22 to 2025-26 (25% of the Amount Put to Tender i.e., Rs. 5.28 Lakhs) in the prescribed format from the Competent Authority not below the rank of Executive Engieer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.
The Tenderer shall achieved in at least one financial years an average annual financial turnover from financial year 2021-22 to 2025-26 of Rs. 21.12 Lakhs. (not less than the estimated cost under this contract)
The EMD of Rs. 22,000/- shall be paid in full through e-payment in favour of Executive Engineer, PWD, Chikodi Dn, Chikodi
CAT IIA Caste Certificate
For CAT IIA contractors reservation category participate in the tender, the contractors should upload the domicile certificate stayed in KARNATAKA for minimum of 10 years issued by a competent authority / Tahsildar.
₹530
₹22,000
2 Oct 2026
2 Oct 2026
19 Oct 2026
15 Oct 2026
Construction of two classrooms for Government kannada higher primary upgraded school in walakai village of chikodi taluka belagavi dist under HoA 8443 Deposite contribution for year 2026-27
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type)
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete : 125mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for Foundation upto Plinth isolated footing 8% (SR VOL I 2023-24, Page No. 111 Item No. Addendum I)
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (SR VOL I 2023-24, Page No. 111 Item No. Addendum I)
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings 50% (SR VOL I 2023-24, Page No. 111 Item No. Addendum I)
Column Upto Ground Floor Slab and parapet
Shuttering For Column
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering...
Shuttering For Lintels and Beams
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (SR VOL I 2023-24, Page No...
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs 50% (SR VOL I 2023-24, Page No. 112 Item No. Addendum I)
Shuttering For Roof slab
Shuttering For Chejjas
KSRB 4-6.5 : Providing Percentage Additionalities for Formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections 45% (SR VOL I 2...
Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm (SR VOL II 2023-24, Page No. A-24 Item No.394)
Providing and fixing Green board for class room (Quotation rate)
Providing and fixing Hold fasts M.S. for doors etc complete (Vol.2, P.No.A-25, S.No.444)
Electric work-Construction of two classrooms for Government kannada higher primary upgraded school in walakai village of chikodi taluka belagavi dist under HoA 8443 Deposite contribution for year 2026-27
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm . etc. as required.
Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.
I. Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi st...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine crews, bolts nuts etc., complete on the existing me...
LED light fitting 1 x 4'- 20/22 w Each
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutout sand other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried inapit. The pits hould be ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball beari...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.
Fixing all types and all capacities off luorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5A. ceiling rose, necessary len...
Supplying PVC flexible conduit pipe. mm dia fixing on surface over inverted tapered wooden plugs orphill plugs or rawl plugs and clamped using heavy gauge saddle satan interval of 300mm using NF screw...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Debarment circular.pdf
Others - Govt Circular • 0.74 MB
technical specifications.zip
Others - Specification • 0.27 MB
Royalty Order.pdf
Others - Royalty Order • 4.03 MB
bid-doc_wi_44628-kw-2-CAT II A.docx
Tender Document • 1.11 MB
randimization.pdf
Others - reservation lot • 0.03 MB
building_specifications.zip
Others - Specification • 0.16 MB
electrical tech specifications.pdf
Others - Specification • 0.45 MB
Circular.pdf
Others - Govt Circular • 2.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .