Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹42.1 LAWARDED | AWARDED |
Tender Value
₹49.8 L
EMD Value
₹1 L
Closing Date
31 May 2025, 9:30 pmClosed
Directorate of Municipal Administration
Continued work of Raith Samudhaya Bhavan in Shivanand nagar Gamanagatti at ward no 28
DMA/2024-25/BD/WORK_INDENT37587
DMA/2024-25/BD/WORK_INDENT37587
Open
Buildings
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
₹1,250
₹1 L
16 May 2025
16 May 2025
23 May 2025
Continued work of Raith Samudhaya Bhavan in Shivanand nagar Gamanagatti at ward no 28
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Centering & Shuttering :COLUMNS: Additionalities for formwork, centering &scaffolding - Appendix- I- 70%
Centering & Shuttering: ROOF BEAM: Additionalities for formwork, centering &scaffolding - Appendix- I- 60%
Centering & Shuttering: ROOF SLAB: Additionalities for formwork, centering &scaffolding - Appendix- I- 50%
Centering & Shuttering: CHEJJA: Additionalities for formwork, centering &scaffolding - Appendix- I- 45%
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing brass bib cock of approved quality 15 mm nominal bore
Providing and fixing brass stop cock of approved quality 15 mm nominal bore
Providing and fixing Brass full way valve gate wit
Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
PVC pipes of 10 Kg/cm2 for 90mm
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing
not less than 45 g
S.C.I. gully or nahani grating 100 mm dia
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The ...
supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...
supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 20mm vPWD,Elct, SR-2023-2...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 25mm PWD,Elct
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 25mm PWD,Elc
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (c...
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (c...
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (c...
Supplying and fixing urface/flush mounting unbreakablePVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessaryrawl plugs, Machine/NF sc...
Supplying and fixing urface/flush mounting unbreakablePVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessaryrawl plugs, Machine/NF sc...
Supplying and fixing urface/flush mounting unbreakablePVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessaryrawl plugs, Machine/NF sc...
Supplying and fixing urface/flush mounting unbreakablePVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessaryrawl plugs, Machine/NF sc...
Supplying and fixing urface/flush mounting unbreakablePVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessaryrawl plugs, Machine/NF sc...
Supplying and fixing/replacing of 6/16/32Amps electricalaccessories on existing switch board. 3.14.6) 6 Amps Battern Holder PWD,Elct
Supplying and fixing/replacing of 6/16/32Amps electricalaccessories on existing switch board. 3.14.5) 6 Amps Bakelite Ceiling Rose
Supplying and fixing of Metal fan hook 1.12) Metal Fan BoxPWD,Elct
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase /...
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 ...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-69...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-69...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-69...
Wiring for lighting/power circuit using one of FRLS PVC Insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-6...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycar bonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing me...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.1)6Amps one way. PWD,Elct
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293.3.6.11)6/16Amps universal socketPWD,Elct
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.3)6Amps 3way socket PWD,Elct
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.10) 32Amps DP switch PWD,Elct
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293.3.6.4)Stepped Fan Regulator. PWD,Elct
Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V @ 50/60Hz & Power fact...
Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supplying of recess mounting non integral type .LED. W luminaire comprising of pressure decast/extrudedaluminium housing, with spring loaded fase ceiling clamps,Power LEDs with CCT 6500 degree K, CRI ...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires,...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...
Fixing a ceiling / wall mounting fan of all capacities and alltypes, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 48" Sweep (1200mm) 12" Sweep (300mm)Page No. 22 IItem code6.2.1 PWD,Elct, SR-2022-...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire.Page No. 46 IItem code...
Extra length of GI pipe of class B 19mm dia for down rod. PWD,Elct
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.3)63AmpsPWD,Elct,
Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240/450V up to 300mA sensitivity onexisting wood/panel board.16-25 Amps 2 polePWD,Elct
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40...
MS box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, ...
Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which a...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 5.11.2) 100APWD,Elct
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38 PWD,Elct
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.5.34 PWD,Elct
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
LEDLamps Supplying & fixing retrofit type -PL- LED Lamp .WLED linear source with CCT 6500 degree K, CRI 70%.efficacy 80 lumen per watt, life 25000 burning hoursand Compliance to IS 10322/IEC 60598, LM...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .