SPECIAL REPAIRS TO HANDLEY CROSS BUNGALOW

Amount

Dismantling timber scantling 40 Sqm.cm and over in section in any position (unframed/ framed work ) complete all as specified and as directed.

Dismantling boarding, any description, fixed with screw complete all as specified and as directed.

M&L for moorum/red bajri filling in floor or paving, laid in layer not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for pre construction ANTI- TERMITE TREATMENT treating the top surface of filled earth at the rate of 5 litres of emulsion per square meter of surface as per direction of engineer-in-charge complete all as specified and as directed.

M&L Hardcore of gauge not exceeding 63mm wit broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

M&L for 40 mm thick Cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate, finished even and fair without using extra cement to receive top layer complete all as specified and as directed.

M&L for 50mm thick Cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete1:3:6 type C-2 using 40mm graded stone aggregate as in Plinth protection and pavings finished even and fair without using extra cement complete all as specified and as directed.

M&L for Chequerd cement concrete coloured tiles 300 x 300, 25 mm thick set jointed in neat cement slurry with grey cement & pigment as in floors including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviciable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for joint free anti - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc. including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles in bathroom of size 300x600mm, 8 to 10 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:3 complete all as specified and as directed.

M&L for any shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.42 sqm. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(light shade) in floors etc. including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for any shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.42 sqm. in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(light shade) including 10 mm thick screed bed in CM 1:3 complete all as specified and as directed.

M&L for granite (of any type) slab 18 to 20mm thick machin cut, bedding ang jointed with grey cement slurry and pointed with white cement with admixture of pigmenr of match to shade of granite stone including grinding and polishing overand including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr -in-charge.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc. complete all as specified and as directed.

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and as directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6. complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:4 mixed with WPC on fair face of stone surfaces /brick wal surfaces finished even and smooth without to using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of stone surfaces /brick wall suffaces finished even and smooth with out using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, griders, bressummers, lintels, cantilivers, shelves including supports, overhangs etc. also splays between floors and beams complete all as specified and as directed.

M&L for RCC Type B1 1:1 1/2:3 using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels, slab over 1.5m span complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

As per item no 26 above, 5mm dia and over in stirupps, spacers and binders complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of surface with two coat of wall care putty and applying two coat of acrylic emulsion paint over a coat of primer on wall surfaces complete all as specified and as directed.

M&L for preparation of new surface with two coat of wall care putty and applying two coat of acrylic emulsion piant over a coat of primer on wall surfaces complete all as specified and directed

M&L for complete removal of existing treatment from external wall surfaces and applying two coat of acrylic emulsion exterior paint (weather coating) over a coat of primer after applying a coat of wall care putty all as per manufactured instruction complete all as specified and as directed.

M&L for preparation of new plastered external wall surfaces and applying two coats of acrylic emulsion exterior paint (weather coating) over a coat of primer after applying a coat of wall care putty all as per manufactured instruction complete all as specified and as directed.

Dismantling of ceiling boards or insulation boards any thickness including cover fillets complete all as specified and as directed.

M&L for providing gypsum board false ceiling 10-12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasterners clips as per manufacturers instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceiling etc complete all as specified and directed.

M&L for preparing false ceiling with primer and applying one coat of smart care primer (Primer cum sealer) applying two coat of royal aspira of approved colour by roller all as manufacturer instructions of asian paint limited or commercially and technically equilavent paint complete all as and as directed.

S&F MS fancy type decorative drophery rod 20mm dia including side caps and single/ double brackets, as in repairs including end bushes complete all as specified and as directed.

M/L for GI tubes 15mm bore, medium grade with all fittings, fixed to walls and ceiling including taking up/down steel tubing and connections and cleaning for refixing or removal to store complete all as specified and as directed.

M/L for GI tubes 20mm bore, medium grade with all fittings, fixed to walls and ceiling including taking up/down steel tubing and connections and cleaning for refixing or removal to store complete all as specified and as directed.

Dismantling of PVC or reinforced cement concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F PVC (SWR) half rounded gutter dia 150mm (4kg/sqcm) including end cap, reducer drop let etc.,, complete all as specified and as directed.

S/F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S/F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S/F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed.

S/F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap 100 mm bore, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair stainless steel 1 mm thick kitchen sink duet regular double bowl of overall size 1143 X 510 X 203 mm and bowl size 510 x 405 x 203mm including coupling, waste pipes, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets/ in granite slab and connecting union to pipe complete all as specified and as directed. Make -Prayag Cat Part No 1250D or techno-commercially equivalent

S&F in repair Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as specified and as directed. Make- Jaquar Cat No CON-309KNB or techno-commercially equivalent

S&F in repair Europen bristol coupled closet casecade size 850 x 360 x 720mm with duel flushing cistern system with PP soft close seat cover, hinges fixing accessories set with P or S trap complete all as specified and as directed. Make- Jaquar Code OPS-WHT-0205 P/S or techno-commercially equivalent

S&F in repair counter top wash basin snow white oval type 560x470mm fixed over and including granite slab of size 900x600x18mm including brackets, PVC connections, waste pipe, waste coupling etc. Including taking down existing one complete all as specified and as directed. Make: Cera Cat No S2030104 popular for counter type or techno-commercially equivalent

S&F Rotational moulded polythene water storage tanks 1000 ltr capacity (cylinderical vertical type with closed top) hoisted and fixed in position all as specified in SSR Part I including existing dismantling water tanks and removing to store.complete all as specified and as directed.

S&F Ball valves suitable for 20 mm bore pipe, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) complete all as specified and as directed.

S&F in repair 15mm bore health faucet including 1.2m long flexible tube and wall hook complete all as specified and as directed. Cat No. ALD-CHR 565 Make Jaquar or techno-commercially equivalent

S&F in repair PVC connections 15 mm size, 450mm long with PTMT nuts complete all as specified and as directed.

S&F in repair 15mm bore Angular stop cock with wall flange all as specified and as directed. Cat No ORP 10053 PM Make - Jaquar or or techno-commercially equivalent

S&F in repair wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower) complete all as specified and as directed. Cat No CON-281KN Make - Jaquar or techno-commercially equivalent

S&F in repair hand shower 95mm round shape single flow (ABS body chromw plated with grey face plate) with rubit cleaning system including flexible pipe complete all as specified and as directed. Make: Jaquar Cat No - HSH-1737/SHA-571 or techno-commercially equivalent

S&F in repair 15mm bore bib cock long body with wall flange complete all as specified and as directed. Cat No ORP 10037PM Make - Jaquar or techno-commercially equivalent

S&F in repair over head shower (150 x 150mm) of complete all as specified and as directed. Make Jaquar Cat No OHS-CHR-1605 or techno-commercially equivalent

S&F in repair Central hole basin mixer with popup waste system with 450mm long braided hoses complete all as specified and as directed. Cat No - CON-169KNB Make - Jaquar or techno-commercially equivalent

S&F in repair towel ring square with round flange complete all as specified and as directed. Cat No ACN - 1121BN Make - Jaquar or techno-commercially equivalent

S&F in repair toilet paper holder complete all as specified and complete Cat No ACN-1151N Make - Jaquar or techno-commercially equivalent

S&F in repair soap dish holder complete all as specified and complete all as specified and as directed.. Make of Jaquar Cat No - ACN - 1131N or techno-commercially equivalent

S&F in repair tumbler holder complete all as specified and as directed. Make of Jaquar Cat No - ACN-1141N or techno-commercially equivalent .

S&F in repair Towel rail 600mm long complete all as specified and as directed Make Jaquar Cat No ACN - 1111NM or techno-commercially equivalent

S&F in repair Towel rack 600mm long with lower hangers complete all as specified and as directed. Make Jaquar Cat No ACN 1181N or techno-commercially equivalent

S&F in repairs 5.50mm thick looking mirror of size 900x600mm mounted on 6mm thick Plywood backing or AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished and fixed to wooden plugs with chromium plated brass screws and cupwashers all as specified and directed by Engr-in-Charge.

S&F in repairs corner racks with glass with brass brackets chromium plated railings complete all as specified and as directed. Make. Jaquar Cat No ACN - 1173 or techno-commercially equivalent.

S&F in repairs double coat hook with brass brackets cpmplete all as specified and as directed Make. Jaquar Cat No ACN - 1161N or techno-commercially equivalent.

S&F in repairs stainless steel plate rack (over all size) 31 x 36 x 10 inch complete all as specified and as directed. Make Prayag Cat No : P-348 or techno-commercially equivalent

Dismantling of single layer mangalore pattern roofing tiles complete all as specified and as directed.

Dismantling of battern for tiles shingles etc spaced exceeding 15 cm C/C etc complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Labour only for laying old roof tile, mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M&L for roof tile, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M&L for second class hardwood clean sawn battern for tile roofing exceeding 5 Sqcm and not exceeding 15 sqcm in sectional area at 15 cm centres complete all as specified and as directed.

S&F 2nd class hard wood scantling as in rafters, purlins, trusses etc complete all as specified and as directed.

M&L for 0.60mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.

M&L for 0.60mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new mangalore pattern tile surfaces and appying two coats of anti fungal paint weather coating on external tiles over a coat of primer complete all as specified and as directed.

M&L for preparation of old mangalore pattern tile surfaces and appying two coats of anti fungal paint weather coating on external tiles over a coat of primer complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat ,squar tube etc sections) including distance pieces, cleats etc. confirming to Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

M&L for providing PCC 1:2:4 Type B1 with 20mm graded stone aggregate in plinth band, string course or coping etc complete all as specified and complete all as specified and as directed.

M&L for providing PCC 1:3:6 Type C2 with 40mm garaded stone aggregate in surface channel and drains complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

Taking down chowkhats or frame not exceeding 1.5 Sqm each without taking off shutters from frame, complete all as specified and as directed.

Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each without taking off shutters from frame, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F 75mm long MS Butt hinges medium weight cold rolled complete all as specified and as directed.

S&F 150 mm long aluminum handles cast type anodized complete all as specified and as directed.

S&F 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F second class hardwood plain,solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd Class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section8, clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to received glass, gauge etc (with sash bar) edges of framing plain, chamnered or rounded and mitred, beads for securing glass etc the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) as in window & ventilaters shutters and fitted to chowkat etc complete all as specified and as directed.

S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with Tinned Tacks or wire staple complete all as specified and as directed.

S&F Mild Steel works as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and as directed.

S&F 100mm long Butt hinges extruded brass with mild steel hinge pin, bright polished complete all as specified and as directed.

S&F 75mm long Butt hinges extruded brass with mild steel hinge pin, bright polished complete all as specified and as directed.

S&F 150mm long extruded brass handles fabricated type polished complete all as specified and as directed.

S&F 100mm long extruded brass handles fabricated type polished complete all as specified and as directed.

S&F 200mm long Brass barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm Brass barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300MM LONG Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

M&L for preparation of old wooden surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint including complete all as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and as directed.

M&L for preparation old steel surfaces of any description exceeding 10 cm width or girth, not otherwise described any applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Prelaminated particle board exterior grade 18/19mm thick prelaminated one side with decorative choice lamination and balancing white on other side fixed with screw with timber frame including Teak wood lipping, complete all as specified and as directed.

S&F Pair of clip on soft closing concealed hinges for full overlay doors 2 holes (15-22mm) complete all as specified and as directed.

S&F 30mm (width of flaps) continous piano hinge mild steel bright finish or electrogalvanised complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of brass bright finished complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.

M&L 3 mm thick Sheet glass, ordinary quality / frosted glass and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S&F mild steel small articles like bands, straps, supports or stays for rainwater pipe/gutter ventilating pipes, including bolts etc conforming to Fe-290 Gde -165 complete all as specified and as directed by Engr-in-Charge.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work congorming to Fe-290 Gde E 165 complete all as specified and as directed. by Engr-in-Charge.

M&L for preparing new surfaces of steel over 10 cm width or girth not otherwise specified and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed.

M&L for rendering 20 mm thick on fair faces of brick work or concrete surfaces in CM1:4 using water proofing compound (WPC measured seperately) finished fair and even complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:2:4 type B-1 using 20 mm greded stone aggregate as in roof padding complete all as specified and as directed.

M&L for APP modified water proofing membrane, 3 mm thick and weighing not less than 3.6 kg/Sqm reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm side lap & end lap 15 cm over coat of bitumen primer @ 0.20 Kg/Sqm & finishing with aluminium paint applied @ 0.10 kg/Sqm & finished complete all as specified and as directed.

M&L for Cup Board cabinet carcase ACTION BRAND TESA HDHMR BOTH SIDE PRE LAMINTAED Board 18mm Thick, shutter 18mm thick, 8mm thick back board. 18mm thick vertical support and horizontal (any nos) selfs of depth 450mm to 900 mm and drawer as required, Hardware EBCO with soft closer, handle, telescopic channel for drawer etc as directed by Engr -in- charge.

Taking down old, unserviceable aluminium/copper point wiring (light, fan, socket or power) complete, including fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. NOTE:- Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rate.

Taking down old unserviceable sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. NOTE:- Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rate.

Disconnecting/dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/un serviceable burnt MCB's complete all as specified and as directed.

M&L for concealed point wiring with two single core 1.5 Sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl provn of modular boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed for the following. NOTE: 1.) Cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates. 2.) Modular boxes shall be measured and paid separately.

(a) One light/fan/call bell point controlled by one switch.

(b) One 5 amps 5 Pin socket outlet on same board .

(c) One 5 amps 5 Pin socket outlet on independent board .

M & L for concealed point wiring with two single core 2.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non- metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including provision of 2.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl provn of modular boxes of appropriate size & thickness fixed flush to wall for housing 15/16/20 Amps switch-socket outlets etc. on independent board complete all as specified and as directed. NOTE: 1.) Cutting chases and making good the disturbed surfaces is included in the unit quoted rates. 2.) Modular boxes shall be measured and paid separately.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.50) sq. mm + (1 x 2.50) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc. complete all as specified & as directed. NOTE : 1.)Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2.) Cutting chases and making good the disturbed surfaces is included in the unit quoted rates. 3.) Modular boxes shall be measured and paid separately.

S&F Modular type socket out let 2 in 1, 6/16 Amps, 2 module, with ISI marking all as specified and as directed. Make : Cat No ACVKCWW163 Verona of Crabtree (Havells) or techno-commercially equivalent.

S&F Modular type switch single pole ,16 Amps one way, 1 module, ISI marked all as specified and as directed. Make : Cat No ACVSXXW161 Verona of Crabtree (Havells) or techno-commercially equivalent.

S&F Modular type switch single pole, 10 Amps one way, 1 module, ISI marked complete all as specified and as directed. Make : Cat No ACVSXXW101 Verona of Crabtree (Havells) or techno-commercially equivalent.

S&F Modular type socket out let 6 Amps 2/3 pin combined, 2 module, ISI marked complete all as specified and directed. Make : Cat No ACVKSWW065 Verona of Crabtree (Havells) or techno-commercially equivalent.

S&F switch bell push modular type, 10 Amps, single pole, one module, ISI marked all as specified and directed. Make : Cat No ACVSBXW101 Verona of Crabtree (Havells) or techno-commercially equivalent.

S&F call Bell, AC, Ding Dong type 240 Volt, ISI marked all as specified and directed. Make :Anchor Cat No 38921 or techno-commercially equivalent.

S&F concealing modular metal flush box suitable for fixing switches/sockets of following modules complete all as specified and as directed.

(a) 1/2 Module

(b) 3 Module

(c) 4 Module

(d) 6 Module NOTE: The make of modular metal flush boxes should be same as that of switches/ sockets.

S&F modular cover plate suitable for fixing switches/sockets of following modules complete all as specified and as directed.

(a) 1/2 Module

(b) 3 Module

(c) 4 Module

(d) 6 Module NOTE : The make of modular cover plates should be same as that of switches/ sockets.

S & F ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts, ISI marked complete all as specified & as directed.

S&F LED lighting fixture 240 V , 20 watts , CT 5700 K, CRI ≥ 80 , Luminous Efficacy ≥ 100 lm/ W, Ingress protection not less than IP 20,Impact resistance not less than IK 03, Class II,with extruded AL heat sink, Milky white polycarbonate diffuser, wall or surface mounted 4ft LED batten with electronic driver, with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size and including flexible hose complete all as specified and directed by the Engr-in-charge. Make : Havells, Cat No : ENDURALINEARNEOBS20WLED865SPCWH or techno-commercially equivalent.

S&F LED lighting fixture 240 V,10 watts , CT 5700 K, CRI ≥ 80, Luminous Efficacy ≥ 100 lm/ W, Ingress protection not less than IP 20, Impact resistance not less than IK 03, Class II,with extruded AL heat sink, Milky white polycarbonate diffuser, wall or surface mounted 2ft LED batten with electronic driver, with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size and including flexible hose complete all as specified and directed. Make : Havells, Cat No: ENDURALINEARNEOBS10WLED865SPCWH or techno-commercially equivalent.

S&F surface panel LED downlight of rating 18 W, CT 6500K, Ingress protection not less than IP44 rating, Power factor: ≥ 0.90 ,Minimum 1450 Lumen output, CRI ≥ 80, with electronic driver unit with Over voltage protection, Short circuit protection, Open circuit protection, Surge protection with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells, Cat No: LHEAABP7IL1W018 or techno-commercially equivalent.

S&F wall mounting Decorative fixture with opal glass diffuser, including one number LED lamp 9 W ,CT 3000 K, Minimum 850 lumen of E27 Cap with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size. Make : Havells Cat No LHJE01104499 (for fixture), or techno-commercially equivalent Make:Havells, LHLDEUHEMC8R009 (for lamps) or techno-commercially equivalent.

S&F wall mounted LED Focus light 10 W, 240 V, PF ≥ 0.95, Luminous efficacy ≥ 90 Lm/watts, CT 3000K,Ingress protection not less than IP 20 all as specified and directed ,including integrated driver complete.

S&F wall mounting Decorative fixture with opal glass diffuser, including one number LED lamp 3 W ,CT 3000 K, Minimum 240 lumen of E14 Cap with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size. Make : Havells Cat No LHJE01106499( for fixture), or techno-commercially equivalent . Make:Havells Cat No: LHLDEROEMD8X003 (for lamps) or techno-commercially equivalent.

S&F surface mounted LED down lighter 15W, 240 V, CRI ≥ 80, Luminous Efficacy≥ 100 lm/ W , CCT 5700 K, Class II, Ingress protection not less than IP 20, Impact resistance not less than IK 03, with integral electronic driver in SMPS based constant current supply with Output Short-Circuit Protection, Surge Voltage Protection and other safety features as per IS15885 Part 2/Sec13, all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells Cat No : INTEGRANEOSURFACEDLS15WLED857S or techno-commercially equivalent.

S&F surface panel LED downlight of rating 12 W, CT 6500K, Ingress protection not less than IP44 rating, Power factor: ≥ 0.90 ,Minimum 900 Lumen output, CRI ≥ 80, with electronic driver unit with Over voltage protection, Short circuit protection, Open circuit protection, Surge protection with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells Cat No: LHEAABP7IL1W012 or techno-commercially equivalent.

S&F LED bulk head luminaire, 10 W, 240 V, CRI ≥ 80, CT 6000K, Lumen output ≥ 400 lumen, Ingress protection not less than IP 65, Class I, with integrated driver all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed Make: Havells Cat No RUGBYNEONFT10WLED860SSYMTOPC or techno-commercially equivalent.

S&F LED building security light fittings of 25 W , CT 5700 K , Ingress protection not less than IP 66, Minimum 2500 lumen output, SMD LED package .Powered by Built-in electronic driver with lower THD, Output Open /Short Circuit protection, Phase to Phase protection, Over Voltage protection,Surge Voltage protection & other safety features as per IS 15885 Part 2/ Sec 13. incl bracket made out of 40 mm dia light grade GI pipe duly fixed with MS clamps nut, bolts etc. and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size and including flexible hose all as specified & as directed . Make:Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPC or techno-commercially equivalent.

S&F Exhaust fan 240 V, 50 Hz, single phase, 250mm sweep, air delivery 860 m³/h, rated speed 1200 RPM, noise level less than 44 dB, PVC body with their all accessories, fixed properly on window/ stone wall surfaces of thickness not exceeding 50 cm including making proper sized exhaust hole of 250 mm dia, Louver Shutter suitable for the same exhaust fan and which shall easily be operated with exhaust air pressure, connecting up from ceiling rose with twin/three core twisted flexible copper conductor cable of suitable size and including flexible hose complete. Any disturbed surfaces of wall shall be made good by cement work/plastering and matching by existing colour white/colour wash including removing of old exhaust fan and connecting/testing complete as directed. Make: Havells ,Code:Venti Air-DX whiteor techno-commercially equivalent. Note: Old U/S Exhaust fan will be handed over to MES Store for keeping in safe custody.

S&F in single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A C series with Breaking capacity 10 KA all as directed. Make: L&T Cat No:DBMPS120SD or techno-commercially equivalent.

Taking down carefully storage type water heaters (Geyser) of any type and make of capacity upto 50 Ltrs, after disconnecting all electrical and water connections complete all as specified and directed. Note: Old U/S Geysers will be handed over to MES Store for keeping in safe custody.

Supply, Fix, Installing and Testing Vertical Storage type Electric Water heater( Geysers) of 25 Ltrs capacity, BEE 5 star rated, 240 V, 2 KW, Class I, water splash proof of IPX4, 0.8 MPa high working pressure, High pressure Tank Made of ultra thick super cold rolled steel plates, with the safety features as Multifunctional safety valve Thermostat and Thermal cut off ,non-ferrous pressure plate with & incl provn of 04 Nos grouting bolts, adjustable temp knob and 4 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surfaces complete, Making electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord and water connections with steel braided hoses 2 Nos complete all as specified and as directed by the Engr-in-Charge. Make: Havells cat No:GHWAMGTWH025 Monza DX or techno-commercially equivalent. NOTE:- i) Installed Geyser's warranty card duly signed by the user should be submitted to the Engr-in-Charge. ii) The cost of making good the disturbed surface is deemed to be included in the unit quoted rates. iii) Design/ Drawing/ BOM/ Technical specifications of the Geyser is to be obtained from OEM/ Auth Supplier & the same is to be got approved from Engr-in-Charge before placing final order to the OEM/ Auth Suppliers wherever equivalency of the specified Cat Part/Make ref is concerned.

S&F TPN vertical DB suitable for MCCB incoming, Ingress protection not less than IP 43 with metal double door, Impact resistance not less than IK 09, 6 Way fitted with Busbars, Blanking plates, Neutral links, flushing to the wall/ fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge. Make: L&T Cat No: DBPGL006DD or techno-commercially equivalent. Note: MCCB and MCB's will be paid separately under relevant items.

S&F MCCB, 4 pole,40 to 50 A rating, 415Volts,25 KA Breaking capacity,Ics=100% of Icu, with Adjustable overload settings(0.8 -1.0 x In ) & Adjustable Short Circuit setting ( 6-10 x In ) of all as directed by the Engr-in-Charge. Make: L&T Cat No: CM91712OOGOOG or techno-commercially equivalent.

S & F Sheet metal enclosure for 8 way DBs double door type 240 volts,IP 43, IK 09, rated bus bars, earth bar, neutral links complete incl. blanking plates, Magnetic door lock, Scratch resistant surface as required & flushing to the wall/ fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge. Make: Havells, Cat No: DHDNSHODDW08 or techno-commercially equivalent.

Supply and Fixing Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA, ISI Marked. Cat No-DHMGCSPF006-032 Make-Havells or techno-commercially equivalent.

Supply and Fixing Miniature circuit Breakers, SP&N, C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA, ISI Marked. Make:Havells,Cat No-DHMGCSNF006-032 or techno-commercially equivalent.

Supply and Fixing Miniature circuit Breakers, Single pole, C-Series 240 Volts of capacity (40 Amps) as ordered breaking capacity 10 KA,ISI Marked . Make:Havells, Cat No-DHMGCSPF040 or techno-commercially equivalent.

S&F internet socket RJ-45,UTP 8 contacts ,shielded, folded metal 1 module, ISI Marked all as directed. Make:Legrand,Cat No:5734 28 or techno-commercially equivalent.

M&L internet LAN cable,UTP CAT 6 with star separator, Electrolytic grade solid annealed bare copper conductor, 4 Pair unshielded twisted pair (UTP) Industrial cables for LAN Network incl PVC conduit and necessary items, ISI Marked Make: Havells, Cat no: WHLJTTERCAT6 or techno-commercially equivalent.

S&F TV coaxial socket, 1 module, ISI Marked all as specified and as directed. Make: Legrand, Cat no: 573625 or techno-commercially equivalent.

M & L for Installation, Testing and Commissioning of earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC earth pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI wire protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete. Note: On testing after completion, if the desired earth resistance is not found according to the relevant Indian standards it is to be redone to the entire satisfaction of Engr-in- Charge at no extra cost to the Dept.

S&F chandelier fixture 8 LT opal glass with chrome finish, Dimension : D-700 mm H-1200 mm, with 8 Nos of LED lamps of 5W, Minimum 400 Lumen, CT 3000 K, candle type with E-14 base cap, with all lamps and accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size, adjusting the chain link pendants to adjust the height of the fittings all as directed by Engr- in charge. Make : Jaguar Cat No :KCH-CHR-MD160275218A (For chandelier) or techno-commercially equivalent. Make:Havells Cat No: LHLDEROEMD9X005 ( For lamps) or techno-commercially equivalent . NOTE:- Design/ Drawing/ BOM/ Technical specifications of the chandelier is to be obtained from OEM/ Auth Supplier & the same is to be got approved from Engr-in-Charge before placing final order to the OEM/ Auth Suppliers wherever equivalency of the specified Cat Part/Make ref is concerned.

S&F wall mounting Decorative fixture Opal glass with Chrome finish with minimum Dimension : L-310 mm W-160 mm H- 200 mm, 2 Nos of LED lamps of 5 W, Minimum 400 Lumen, CT 3000 K, candle type with E-14 base cap , with all lamps and accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size all as directed by Engr- in charge Make :Jaguar Cat No KCH-CHR-MB160275212A (For fittings) or techno-commercially equivalent. . Make:Havells Cat No: LHLDEROEMD9X005 ( For lamps) or techno-commercially equivalent. NOTE:- Design/ Drawing/ BOM/ Technical specifications of the wall mounted fitting is to be obtained from OEM/ Auth Supplier & the same is to be got approved from Engr-in-Charge before placing final order to the OEM/ Auth Suppliers wherever equivalency of the specified Cat Part/Make ref is concerned.

S&F LED Gate light fitting 25 W, Ingress protection not less than IP 65, Impact resistance not less than IK 07, CCT 5700K, CRI ≥ 70, Inbuilt SPD ≥ 4kV, Symmetrical light distribution, Isolated electronic LED driver with fixing accessories all internally prewired and including connecting up with twin/three core flexible copper conductor cable of suitable size including taking down the un serviceable fitting complete all as specified and directed by Engr-in-Charge. Make : Havells cat Part No: CORALPT25WLED757PSYMTOPC or techno-commercially equivalent

S&F LED Garden light of 8 W , Ingress protection not less than IP 65, Impact resistance not less than IK 07, CCT 5700K, CRI ≥ 80, Integral Driver, Inbuilt SPD ≥ 3.0 KV, 0.6 m height pole, incl necessary foundation, coping etc complete with all accessories internally prewired and including connecting up with twin/three core flexible copper conductor cable of suitable size from junction box to fitting all as specified and as directed. all as specified and directed by Engr-in-Charge. Make : Havells cat Part No: CONEBL8WLED857SSYMTOPC or techno-commercially equivalent, including taking down the u/s fitting complete all as specified and directed by Engr-in-Charge.

S&F loop in- loop out fuse junction box (CPRI type tested) of internal dimension 140 (H)x140 (W)x 95(D) mm made of FRP sheet with weather proof canopy and locking screw fitted with and incl 50 Amps rated 4 Way connectors for 3 phase and neutral incoming/ outgoing, mounted in the box, fixing on steel tubular/Rail poles/Wall including necessary aluminium clamps, suitable glands, lugs and GI nut and bolts including taking down old u/s junction box complete Make : Sintex cat Part No: GSJB-1414 or techno-commercially equivalent all as specified and directed by Engr-in-Charge. NOTE:- Design/ Drawing/ BOM of the junction box is to be obtained from Manufacturer/ Auth Supplier & the same is to be got approved from Engr-in-Charge before placing final order to the Manufacturer/ Auth Suppliers.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipment's etc. Under ground cable, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 25 Sqmm , incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipment's etc. Under ground cable, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 2 Core 6 Sqmm, incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge .

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for erecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in soft/loose soil complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level no exc 1.5m above the starting point complete all as specified and as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed by Engr-in Charge.

Supply, spreading and compacting of M Sand in trenches for cable cushion on both top and bottom of cable, including ramming all as specified and as directed by Engr-in Charge. NOTE: Thickness of sand cushion after punning down will be measured and paid.

Supply and fix and test LED Street light fitting of capacity 60 Watts, 240 V, Ingress protection not less than IP-66,Impact resistance not less than IK-07, CT 5700K, Luminous efficacy ≥ 115 Lumen/watts, Class I, Powered by Built-in, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, 10 kV Surge protection & other safety tests as per IS 15885, with all accessories including GI pipe bracket made out of 54 mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket on the pole including one coat of primary and two coats of aluminium paint and connecting up complete all as specified and directed by Engr-in-Charge. Make: Havells, Cat No:ENDURAPEARLPLUSSL60WLED757SASYTOPC or techno-commercially equivalent.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31, 9.0 meter long, single swan neck type inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint incl preparation of surfaces complete all as specified and directed. The poles shall confirm to IS - 2713 & each component pipe shall be ISI Marked & confirm to IS - 1161.

M&L for PCC 1:2:4 type B1, using (20mm graded stone aggregate) for coping of poles including necessary form work etc complete all as specified and directed by Engr-in-Charge.

M&L for providing PCC 1:3:6 type C1, Using 40mm graded aggregate for cement concrete in foundations, filling and mass concrete including necessary form work etc complete all as specified and directed.

M&L for providing PCC 1:4:8 type D2, Using 40mm graded aggregate for padding, filling and mass concrete including necessary form work etc complete all as specified and directed.

Supply and laying light grade GI Pipe (ISI Marked) of 50 mm dia for cable protection to be fixed on wall with necessary clamps or in road crossing, complete all as directed. Note:-Rate quoted shall include MS clamps of required size wherever pipes are to be fixed on walls.

Sri Ragavendra Construction