Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.6 LAccepted-AOC FLAT NO 404 BLOCK II NIRMAL HEIGHT SECTOR 12A OLD MATHURA ROAD AGRA 282007 UP | AGRA | AGRA | UTTAR PRADESH | 282007 | 1 | Accepted-AOC Being L-1 | |
| 2 | 2₹30.1 L+₹29,855.50 (1.00%)Rejected-Finance 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹30.8 L+₹1.0 L (3.46%)Rejected-Finance DADAWA KURIYAR KHAS BASTI BASTI UTTAR PRADESH 272178 | BASTI | UTTAR PRADESH | 272178 | 3 | Rejected-Finance Being other than L-1 |
Tender Value
₹34.8 L
EMD Value
₹69,600
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
ADDN ALTN TO SECURITY INFRASTRUCTURE AT 4 AREA MAIN GATE UNDER GE (AF) ADM AREA AT AF STATION AGRA
2023_MES_611343_1
8000-2072/E8
Open Tender
Civil Works
Item Rate
180 days
AF Station Agra
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE AF Adm Area Agra
₹69,600
Yes
27 Sept 2023
31 Jul 2023
2 Sept 2023
31 Jul 2023
31 Aug 2023
14 Aug 2023
Amount
Surface dressing in soft/loose soil n. exc 15cm deep and getting out in complete all as specified and as directed.
Excavation in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed.
All as per item No. 2 above but exc. 1.5 m deep but not exc. 3.00 m depth
Returning filling in including spreading watering and well raming in layer not exceeding 25 cm each in soil complete all as specified and directed.
Removing excavated soil to a distance not excedding 50 m and deposited where directed at a level not excedding 1.5m above the starting point complete all as directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basements slabs, under reamed piles and mass concrete and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts and similar works complete all as specified and directed.
M&L RCC M-25 using 20mm graded stone aggregate as in slab supported on wall, beams and coloumns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar works complete all as specified and directed.
M&L for RCC M-25 using 20mm graded stone aggregate as in chajja complete all as specified and directed.
M&L for RCC design Mix, M-25 (20mm graded stone aggregate) in Beams, lintel bands, cantilevers etc complete all as specified and directed.
Use and Waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finish surface of concrete complete all as specified and as directed.
Use and Waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygon rough finished surface of concrete complete all as specified and as directed.
Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.
Use and Waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
Use and Waste Formwork to chajja including edges rough finished surface of concrete complete all as specified and as directed.
Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide for rough finished surface complete all as specified and as directed.
M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall be measured and paid separately).
Supply only water proofing compound (liquid) complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick on concrete surfaces of ceiling with CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly plastered surface of wall including preparation of surface complete all as specified. Note :- (i) Exterior primer and Acrylic emulsion paint to be applied on wall surface with air less spray machine (Mechanical Means). (ii) Second coat will be applied after complete drying of first coat i.e 6 to 8 Hrs after applying of first coat.
M&L for preparation of new surface of wall and applying two coat of oil bound distemper with roller over a coat of chalk white primer etc. complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
M&L for 75mm thick cement concrete type C-1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction including demolition of existing plinth protection complete all as specified and directed.
Earth filling under floors or pavings, received from excavation laid in layers n. exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed. (Note- Material received from item No. 02 & 03 excavation in trenches will be used)
M&L for 100 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of under floors complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:3 and complete all as specified and directed.
M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed
M&L for machine cut kota stone 18 to 20 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and mirror finish polishing with & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix stone complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded feathred edges colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour feathred edges PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 2nd class hard wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. (Note:- Builder hardware, Glass pane, wire netting requiered shall be measured and paid seperately under respective items)
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F figured glass, 5 mm thick, glazing with oil putty or wooden beads or fixed to aluminium frame in squares exc. 0.50 Sqm in each pane complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
S&F 100mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F stainless steel two tone Silver barrel tower bolt 150 mm long and fixed complete all as specified and directed.
S&F stainless steel handle 150 mm long diagonally shaped complete all as specified and directed.
S&F stainless steel sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and fixing bolts complete all as directed and directed.
M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in copings, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
S&F vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including one number 15 mm bore pillar taps, cast copper alloy, fancy type, chromium plated, 32mm dia PTMT waste coupling, waste pipe and 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.
S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.
S&F 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.
S&F stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.
S&F long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.
S&F CP brass towel ring with bracket, round shape, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F chromium plated brass shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.
S&F 15 mm dia chromium plated brass wall mixture for mixing hot and cold water sutable for 15 mm bore GI pipe complete all as specified and directed.
S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors including excavation, returning filling and removal complete all as specified and directed.
S&F tripple layer rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
M&L for hardcore of broken stone or boulders of gauge not exc 63 mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor/ path etc. complete all as specified.
M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, excavation, returning filling comlete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of concrete and applying two coats of synthetic enamel paint over a coat of priming plaster coat complete all as specified and directed.
M&L Cutting into existing man holes for connection new drains of dia of pipe 150mm internal dia making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching complete all as specified and directed at site.
M&L for screed bed or rendering 10 mm thick in averaging on RCC roof slab/parapet in cement mortar 1:4 mixed with and including integral water proofing comound @ 2 % by wt of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for cleaning of existing surface and applying water proofing treatment to roof slab including vertical surface with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gm / sqm ) applied over a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coat of bituminous primer @ 0.30 ltrs/Sqm surface, application of APP modified membrane and joint shall be sealed by torch application. The overlaps shall be minimum 15 mm on end lap and 100 mm side lap complete all as specified & directed. Note : (i) Treatment shall be done through authorised representative of manufacturer.
M&L for 20 mm thick PCC tiles machine pressed factory made of size 300 mm x 300 mm as per IS-1237-1980 laid over and including 20 mm thick screed in cement mortar 1:4 mixed with liquid water proofing comound, grouted flush and tiles joints filled with polymer based cement proof joint filler of approved company complete all as specified and directed. (Rate of Water proofing compound shall be measured and paid separately).
M&L for cutting out grooves in brick parapet wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove for inserting APP membrane and making good with cement mortar to match the existing treatment complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Dismantling of structural steel work including doors, gates, wind tie etc., but excluding framed trusses etc. complete all as specified and directed.
Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.
M&L RCC M-25 using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footing including attached pilasters and buttresses complete all as specified and directed.
Use and Waste Formwork to walls, retaining walls, basement walls, ballast walls and the like for flat rough finish surface of concrete complete all as specified and as directed.
M&L for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L mild steel framed work with angle iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply only mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 16 to 20 mm dia of neck, length of bolts exc. 22.5 cm but not exc. 30 cm long complete all as specified and directed. Note : Rate for fixing shall deemed to be included in rates of Srl item No. 87
S&F concertina coil of 1050 mm dia (in stretched position), hot dip and galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG), fixed to the MS angle iron/precast RCC fencing post and fixed with razor wire with hte help of hog/lug rings (14 SWG) complete all as specified and directed. Note :- MS angle/fencing post and razor wire shall be measured and paid separately under respective item.
S&F razor wire fencing with 2.6 mm dia and 14 mm wide, 0.50 mm thick razor strip fixed with clamp to angle iron or swan neck angle complete all as specified and directed.
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:3 complete all as specified and directed.
S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors and in weep holes including excavation, returning filling and removal complete all as specified and directed.
--- B L A N K ---
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for 25 mm thick Cement Concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in copings and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
Supply, fixing including welding to MS frame 50 mm dia (Nominal bore) galvanised iron tubing 'heavy grade' complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed.
M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 1.20 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.
All as per item No. 99 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item No. 99 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per Item No 99 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 6 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.
S&F ceiling fan regulator, electronic, socket type, 5 speed 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50 mm dia complete all as specified and directed.
S&F energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95 Make- Havells Cat part No- LUMILINE+BS20WLED865SPCSS , ORIENT Cat part No-LBLN-20-C-AL /Phlips Cat part No- BN021C LED22S PSU CW GR
S&F energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Phlips cat part- BN021LED12S6500PSUGR, Havells Cat part No- LUMILINE+ BS10WLED865SPCSS
S&F enery saving new generation LED 10 Watts, IP-65 bulk head luminarie with opal diffuser complete including making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make :- ORIENT Cat part No-LIBHP-10-C /Phlips cat part- WT202W LED10S CW PSU S3 PC/ Havells Cat part No- RUGBY GENXFS 10WLED 865SSYMBOPC
Supply and fixing electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 star rating complete with all accessories such as safety valve, thermostate, etc. including 450 mm long steel hose connection with brass adopter nut suitable for 15mm bore pipe and suitable for hot water- 01 No and PVC connection with Brass nut for cold water supply -01 No. complete all as specified and directed. Make: Havells model No. GHWAPUTPI025 / Crompton model SOLARIUM NEO/ Bajaj model CALENTA DIGI
S&F ceiling fan 1200 mm sweep, 5 Star rating, 28 watt single phase AC 230 volts 50Hz complete with connecting to ceiling rose or connector using PVC insulated and over all sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor complete all as specified and directed.
S&F Wall mounted fan 400 mm sweep, 1350 RPM, delivery 72 CMM, 240 volt 50 Hz fixing to wall including neceassary work for mounting all as required at site or as directed.
S&F exhaust fan 300 mm sweep steel body, Single phase, 230 volts, 50 Hz AC supply totally enclosed with die cast aluminium rotor mounted on two ball bearing complete with louvers shutters and including PVC insulated three core 0.75 sqmm copper cable from ceiling rose to exhaust fan including grouting of nuts and bolt etc and making good to match the existing surface complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection SPN, 240 volts, 8 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection SPN, 240 volts, 4 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.
S&F MCB SPN 240 volts, 'C' curve of rating 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Supply, installing, erecting, commissioning and testing new factory made LT panel board cubical out door type of suitable size for housing of all equipments & proper heat dissipation, CPRI approved weather/dust proof, made out of 3.15 mm thick CRCA sheet powder coated with front and back side openable with suitable cable chamber and front side shutters with locking arrangement, panel base of angle iron 50x50x6 mm upto 45 cm height for 433 volts, 3 phase, 4 wire system including TPN Aluminium bus bar of rating not less than 1.5 times the rated capacity of the incomer MCCB. The TPN bus bar shall be insulated with colour coded heat shrinkable sleeves and shall be mounted on F class insulators. All interconnections between the main bus bar as well as outgoing feeders shall be carried out with TPN Aluminium bus bar of rating not less than 1.5 times rated capacity of individual outgoing feeders. All control wiring shall be with FRLS PVC insulated 6 sqmm multi-stranded copper conductor and shall be properly bunched. The panel board shall have bottom channel of size 75 x 40 mm and complete mounted or fixed on PCC foundation 0.45 mtr above floor and cable connection with suitable size of copper lugs and suitable size chrome plated glands provided for incoming and out-going cables comprising the following :-
S&F LED flood light fitting 120 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections complete all as specified and directed. Make: Havells Cat Ref JETAIRISFL120WLED757ARWBLTG / Phillips Cat Ref BVP192 LED110 CW HO NB FG GR PSU/ Orient Cat No :LFAP-120-C
S&F post top lantern 30/35 Watts, 230 volts, 50 Hz with IP65 protection, mushroom or oval shaped in opal/ prismatic finish made out of polycarbonate, suitable all accessories and prewired complete all as specified and directed. Make:- Havells Cat Ref RUBYPT35WLED830PSYMTOPC/ Orient Cat No :LLOP-30-C or equivalent in Phillips.
S&F Lithium based Energy Efficient integrated Solar street light of 40 Watt in Aluminium extrusion frame with duly polylurethane coating , encases with Monocrystalline solar PV Panel of 75/80 Wp, litium battery 11.1/12.8 V, 39.6/40 AH with inbuilt BMS, IP 65 high brightness WLED 180-200 Lm/watt) lamp with Aluminium reflector for better light distribution, CRI>70, Colour Tempeture 5700K-6500K micro controller based charge controller cum driver automatic dimming function(First four hours at full brightness & rest of the time at lower light level with PIR motion sensor), dusk to dawn operation suitable to working tempreture -00 C to +500C, adjustable MS clamp suitable for pole/wall mounting etc., including S&F of medium class tubular pole 6 m long 75 mm dia, with 16 mm thick MS base plate of size 250 mm x 250 mm with 4 Nos. 25 mm hole and foundation bolt of 20 mm x 750 mm long, necessary earthwork, removal and returning filling and PCC foundation in 1:3:6 type C-2 using 40 mm graded stone aggregate of size 600 x 600 x 1000 mm complete all as specified and directed. Make - Cat part no.- Axxon -AXN-40 watt of Xxxon Tech Industries./ Orient -LSSN-40 C 100-36 P /Okaya Power Pvt Ltd / Havells
Supply and Laying including testing in floor/trenches or fixed on pole/wall XLPE LT UG cable PVC insulated, bedded, galvanised steel strip or wire armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 10 Sqmm 2 core complete all as specified and directed.
Supply and Laying including testing in floor/trenches or fixed on pole/wall XLPE LT UG cable PVC insulated, bedded, galvanised steel strip or wire armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 35 Sqmm 3.5 core complete all as specified and directed.
Supply & laying double walled corrugated (DWC) HDPE pipe conforming to IS 16205 Pt-24, inner plain, 450 N of approved colour complete with fittings for cable protection of size 63 mm inner dia and 75 mm outer dia complete all as directed.
S&F LED street light fitting having Ingress protection class minimum IP-65 protection, suitable for road lightning luminaries with high power LED for capacity 20/25 W complete with GI bracket made out of GI pipe 40 mm bore light grade bent to required shape of 1.5 mtr long and fixing to pole/wall with suitable size of nut, bolts, washers and clamps of size 25 x 5 mm including making connections complete all as specified and directed. Make: Havells Cat Ref :- ENDURASUNDOWNSL 25WLED765 PASYBOT GIHD/ Philips Cat Ref BRP042LED 19CW MR S1 PSU GR/ Orient Cat No: LSFC-20-C
S&F rigid PVC conduit of dia 25 mm ISI marked including all connected accessories such as tee, elbow reducer, bell mouth etc. complete all as specified and directed.
Removing safely and shifting existing steel tubular pole 9 m long with LED light from one location to other within 0.50 Km radius including necessary earthwork, removal and returning filling and PCC foundation in 1:3:6 type C-2 using 40 mm graded stone aggregate of size 600 x 600 x 1500 mm, coping in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and directed.
S&F flexible wire three core, PVC insulated 1.5 Sqmm multi stranded copper conductor, 1100 V grade for making connections from pole to street/flood lights complete all as specified and directed.
S&F Weather Proof thermo plastic (Polysterene) Cable Junction box, having protection class IP-66 and of overall size min (130 x 180 x 77) mm having metric knockouts on the wall, duly fixed with the pole with terminal (25x3mm) clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 17mm (Complete with check nut) and including cable Lugs 16 Sqmm -08 Nos complete all as specifed and directed. Make :-Hensel Cat part No-KF 1010 G / ABB/ Siemens/Sintex
Sethi Brothers
Abhi Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .