GE/863/EWS-T-30 of 2020-21

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work complete all as specified and directed.

-Ditto- all as per item above but in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in unframed work complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, laid dry complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided forcomplete all as specified and directed.

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors ), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq complete all as specified and directed.m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq complete all as specified and directed.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed but except timber complete all as specified and directed.

S & F of 2nd class soft wood (CHIR) plain fillets, bull nosed, splayed, chamfered or rounded on one face or edge, clean sawn, secured with nails sectional area exc 6 sqcm but not exc 13 sqcm complete all as specified and directed.

M & L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n complete all as specified and directed.exc 6 sq complete all as specified and directed.cm complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n .exc 25 sq complete all as specified and directed.cm complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but EXCEPT STONE complete all as specified and directed.

M & L for providing precast cement concrete Type C1 1:3:6 using 20mm graded stone aggregate and set in cement mortar 1:6 as in bond stone complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0 .18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles of size 300 x 200 x 7mm thick as on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of the tiles over and including rendering 10mm thick on concrete surface as in backing coat for laying wall tiles in CM 1:4 complete all as specified and directed.

M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar 1:4 as in floors with grey cement and pigment complete all as specified and directed.

M & L for proving cement concrete type C1 1:3:6 using 20mm graded aggregate as in roof kerb or mud stops, round on edges including necessary fomwork complete all as specified and directed.

M &L for 50 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M &L for 25 mm thick cement concrete type B-0 1:2:4 nominal mix (using 12 .50 mm graded stone aggregate) as in floor, laid in panels and position to confirm design and finishing top surface even and smooth with using extra cement complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in chajjas complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in Beams , cantilevers, bressummers, lintels etc complete all as specified and directed.

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc complete all as specified and directed. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F of 0 .63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap using grade of zinc coating -275 inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc complete all as specified and directed.

Fixing only sheeting (any thickness) with two corrugation side lap using grade of zinc coating -275 inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc complete all as specified and directed.

S & F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S & F rolled mild steel in Framed work such as grills, gratings, etc . with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe .290.Gde-E-165 complete all as specified and directed.

S & F Rolled mild steel sections as in main and cross beams; hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe - 410-W (Gde-E-250) complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required ; hooks (stay), heavy, for large gates ; hook and pintle hinges ; large hasps and staples ; chains ; hand made slinding bolts; clamps ; hold fasts ; wall ties hooks forhanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 20mm bore tubes any grade to walls and ceilings or laying in floors complete all as specified and directed.

S & F 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 1000 litres capacity rotational moulded double layered polyethylene water storage tanks (cylinderical vertical with closed top) of sintex make hoisted and fixed in position complete all as specified and directed.

S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using integral water proofing compound 3% by weight of cement and finished even and smooth (without using extra cement) complete all as specified and directed. Note :- Integral water proofing compound to be measured and paid separately.

Supply only integral water proofing compound of approved brand/make complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipe single socketed, in any length in retaining wall as spout pipe all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into square, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into square, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

S&F for IInd Class hard wood of Small fittings such as brackets of any type, latch and hing blocks, shaped door & window stops & the like, including all necessary labours; articles n exc 200 cu.cm each complete all as specified and directed.

S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for preparing Surfaces Of wood and wood based materials, steel and Iron work, new or old, of any description or grith not otherwise described and treated with tar or coal tar black paint as in ends of posts, backs of chowkats, etc., area tarred exceeding 0.1 sq.m but not exceeding 0.5 sq.m each complete all as specified and directed.

M & L for preparing Surfaces Of wood and wood based materials, steel and Iron work, new or old, of any description or grith not otherwise described and treated with tar or coal tar black paint as in ends of posts, backs of chowkats, etc., area tarred not exceeding 0.1 sq.m but each complete all as specified and directed.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks including necessary fromwork complete all as specified and directed.

S & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S & F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S & F 75mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S & F 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, etc complete all as specified and directed.

S & F 250 mm length mild steel sliding door bolt hasp, staple (bolt type) stove enamlled black with bright bolt not less than 12 mm dia with and including a minimum of bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 125 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F 100 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F 150mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S & F 125mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm MS barrel tower bolts stove enamelled black with bright bolt of complete all as specified and directed.

S & F 125 mm MS barrel tower bolts stove enamelled black with bright bolt of complete all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete complete all as specified and directed.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer complete all as specified and directed.

`-Ditto- all as per above but one coat of synthetic enamel paint on old wooden surfaces of any description complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint) complete all as specified and directed.

S & F in repair for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs vitreous China valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connceting to the WC and making good to the floor with PCC complete all as specified and directed.

S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed.

S & F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair 20 mm dia Aluminium anodised tubular towel including one pair of fixing brackets complete all as specified and directed.

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall complete all as specified and directed.

S & F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M & L for 100mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Taking Up 100 mm Cast Iron Water Mains (Including All Fittings),With Spigot And Socket Ends And Lead Joints Including Burning Out Joints, and recovering lead etc complete all as specified and directed.

S&F of 100 mm bore cast iron soil, waste and vent pipe, spun pipe, in any length, with or without ears with cement joints in cement sand mortar 1:1 with spun yarn laid in trenches or in floors complete all as specified and directed.

S&F of 100 mm bore Cast Iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.

S & F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith complete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed.

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc and making good disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with 1.5 Sqmm multistranded,1100 volt grade copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable FRLS for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC Box on top for fixing switches sockets etc. for one light point/ fan /Bell point controlled by one switch complete all as specified and directed .

All as per Srl item No 100 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm complete all as specified and directed.

All as per Srl item No 100 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.50 Sqmm complete all as specified and directed.

All as per Srl item No 100 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 2.50 sqmm single core multistanded FRLS PVC insulated copper conductor as earth conducting conductor complete all as specified and directed.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mark complete all as specified and directed.

Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet with extruded aluminium housing and robust construction 20W system lumen with all accessories complete all as specified and directed. Make: Bajaj Cat No. BLRB-DB 118 or equivalent.

Supply and fixing surface & wall mounted straight linear LED 10W tube light fitting batten 2 feet with extruded aluminium housing and robust construction 10W system lumen with all accessories complete all as specified and directed. Make: Bajaj Cat No. BLRB-DB 118 or equivalent.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing LED lamp 9W system lumen (NOM) 600 with all accessoriescomplete all as specified and directed. Make:Cromptom part No-LED 9DFCDL-PRO-BO or equivalent.

Supply & Fixing bulk head light fitting with 10 W LED Lamp complete all as specified and directed. Make Bajaj Cat No BIBWP 10W LED or equivalent.

S&F for exhaust AC, Single Phase 300mm sweep, with louvre ccomplete all as specified and directed.

Supply,fixing, Testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of grouting bolts in walls including piller cock , pvc connection etc and making good disturbed surfaces complete all as specified and directed.

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed.

S&F MCB SPN 40 Amp with rupturing capacity 10 KA complete all as specified and directed.

S&F MCB SP 6 Amp to 32 Amp with rupturing capacity 10 KA complete all as specified and directed.

S&F House service bracket hook type complete with 3.0 m long nos 90 degree bends, M.S. hook and stay or guy complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions

Net Contract Sum will be after deducting Sch Of Credit of Rs. 106042.50

M/S Shamsher Negi Dewa

M/S J.S.ENTERPRISES