Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC | L1 | Accepted-AOC Acceptance of tender | |
| 2 | L2₹25.4 L+₹3,805 (0.15%)Rejected-Finance 111 GB MARG YADAV ELECTRIC MARKET LUCKNOW UP 226018 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226018 | L2 | Rejected-Finance Being Higher bid | |
| 3 | L3₹25.5 L+₹15,801 (0.62%)Rejected-Finance | L3 | Rejected-Finance Being Higher bid |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Lucknow
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
REPAIR / MAINT GOD 2/4/6 POLE STRUCTURE AND CONNECTED ITEMS IN THE AREA OF AGE E/M EXT ELECT UNDER GE E/M LUCKNOW
2023_MES_592849_1
CWE/LKO/EM/T-23 OF 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE EM Lucknow
₹50,000
Yes
22 Jun 2023
2 May 2023
5 Jun 2023
2 May 2023
3 Jun 2023
16 May 2023
2 May 2023 - 16 May 2023
Amount
Dismantling air break gang operated switches & DO unit vertical/horizontal mounted including insulators and operating machanisum for repapir/replacement of brocken/worn out components and insulators for replacement etc complete as specified and directed
Supply, fix, testing and commissioning of air break gang operated switch , triple pole mechanically operated out door type with all fittings/accessories mounted on and including 11 KV HT 15 Nos porcelain insulators (09 Nos insulator for gang operated switch & 06 Nos insulator for drop out fuse unit including suitable rating fuse) and steel channel frame, GI operating rod 25mm dia of suitable length with operating mechanism worked form ground level, vertically operated including locking arrangement & operating handle, with and including 7 levers lock complete suitable for current rating of 400 Amps HT 11 KV working pressure all as specified and directed.
All as per item No 2 here in before but for current rating of 200 Amps HT 11 KV working pressure
Disconnecting the all existing electrical connection from four pole structure & taking out unserviceable lighting arrestor etc complete as specified and directed
S&F lighting arrestor explusion type complete with all fitting, transmission class, discharge capacity 65 kilo amps suitable for 11000 volts all as specified.
Disconnecting the all existing electrical connection from four pole/two pole structure & taking out unserviceable/ burnout HT jumpher /busbar and supplying and fixing of new jumpers/bus bar made of ACSR conductor of existing size including PVC sleeves suitable for 11 KV on HT Four/ two pole structure having 2/3 /4 incoming/outoing feeder including , lugs , nut bolts and washers etc complete all as directed at site by Engr-in-charge.
M&L for servicing of GOD mounted on pole with cleaning the moving and fixed contact and removing the old greas and greasing the moving and fixed contact of GOD with new grease incl tighting of nut,bolt and washer . of GOD complete all as directed by engineer-in-charge
M&L pin type insulator porcelain, vitreous white, brown or green insulator incl one galvanised mild steel spindle two galvanised iron washer and one galvanised iron nut, 150mm height, 150 mm dia suitable for 11000 volt grade incl taking down old one complete as specified.
M & L Danger notice plate made of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters , figures and conventional skull and bones in signal red colour and fixed with M.S clamps , bolts and nuts of approved size, for HT, 25mmX20mmX 1.6mm size incl taking down old one complete all as specified and directed.
M&L for making earthing high conductive, non corosive maintenance free, non fluctuation of ohmic value 80 mmX3000mm (inner strip-3000x50x6mm, connection terminal 100x50x6mm, therminal hole 16mm, Inner filling CCM lectrode pipe-B class) GI pipe in pipe filled with super conductive crysteline with earth plus 50 kg containing mixture of graphite, Sulfate, , Silica,ALumina , Iron Oxide, Titanium oxide, calcium oxide , Magnesium oxide , Sodium oxide , Zink oxide etc) back fill compound should be ROHS including heavy duty polymer Earth pit chember with cover and S&F of GI strip 32x6 mm required at site for connection of earthing with any type equipment complete all accesories for design modification to achieve the earth terminal rod resistance value below 1 ohm complete all as specified and directed by Engineer-in-Charge.
Preperation of old painted surface and painting with 4 pole/two pole structure of HT steel tubular pole 11 mtr long from bottom to top incl all iron structure with asian aluminium paint and painting to bottom up to 1.5 mtr height from top of PCC coping with asian synthetic enamel paint one coats in Red /ylloow/blue alternate strip incl numbering in 8 cm height of number with black paint dully approved by Engineer-in-charge and complete all as specified and directed
S&F Cold shrinkable, in door type, cable end termination kit with all accessories suitable for 11 KV (earth) HT XLPE Cable of size 50 to 95 Sq mm 3 core incl disconnecting/connecting the cable in RYB phase sequence in pole/RMU incl cutting the unserviceable portion and testing after connection in all respect etc complete all as specified and directed.
S&F cold shrinkable, in door type, cable end termination kit with all accessories suitable for 11 KV (earth) HT XLPE Cable of size 120 to 185 Sq mm 3 core incl disconnecting /connecting the cable in RYB phase sequence in RMU/pole incl cutting the unserviceable portion and testing after connection in all respect etc complete as specified and dierected .
S&F cold shrinkable, in door type, cable end termination kit with all accessories suitable for 11 KV (earth) HT XLPE Cable of size 240 to 300 Sq mm 3 core incl disconnecting /connecting the cable in RYB phase sequence in RMU/pole incl cutting the unserviceable portion and testing after connection in all respect etc complete as specified and dierected .
S&F Cold shrinkable,outdoor type, cable end termination kit with all accessories suitable for 11 KV HT(earth) XLPE Cable of size 50 to 95 sq mm, 3 core incl disconnecting /connecting the cable in RYB phase sequence in RMU/pole including cutting the unserviceable portion and testing after connection in all respect etc complete as specified and directed by Engr-in-charge.
Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft/loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level all as specified and directed by Engineer- in- Charge.
Returning filling in,. Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.
Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.
Sand filling under floors or in foundations of transformers including watering and consolidation complete all as specified and directed
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
Demolition of brick work built in cement mortar complete all as specified and directed by -in-charge.
Brick work with fly ash old size , straight or curved on plan exc 6 mtr mean radious built in cement mortar (1:4) for transformer foundation , dwarf wall for fencing etc complete all as specified and directed
Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with ater all as specified and directed .
Rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surface finished fair and even complete for transformer foundation , dwarf wall of fencing etc all as specified and directed .
Demolition of cement concrete unreinforced complete all as specified and directed by -in-charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B-1 , using 20mm graded stone aggregate as in copings, benching and the like including weathering , slightly rounded or chamered angles and throating for transformer foundation , dwarf wall of fencing etc including necessary form work all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embeding in concrete and screwing etc, flate iron for posts , & struts in fencing etc including cutting tops to shape as directed, drilling holes , notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling , bolting or riveting etc & similar work conforming to Fe 290 gde E-165 complete all as specified and directed.
S&F MS framed work as in doors or gates of angle or other section etc to be prepared for hanging and including either hooks and hinges etc with end of bars shouldered and /or reiveted and welded complete all as specified and directed .
S&F Mild steel screw bolts (Machine made), 11 to 15 mm neck dia with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long complete all as specifed and directed.
Dismantling fencing wire mesh any type
Supplying and fixing Welded steel wire fabric wt n.exc 4 Kg/Sqm, any shape complete all as specified and directed by Engr -in-charge
M&L for Preparation of new or previous untreated steel and iron surfaces of any description over 10 cm width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for Preparation of old painted surface of steel and iron surfaces of any description over 10 cm width or girth , not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for two coats of cement base paint over a coat of cement base primer incl preparation of newly plastered surfaces etc complete all as specified .
M&L for one coats of cement base paint incl preparation of old plastered surfaces etc complete all as specified .
M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate 75mm thick as sub base of floors complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set and jointed with neat grey cement and pigment including 40mm thick sand cushion etc complete all as specified and directed by Engr in-charge
Material and labour for sprading of stone aggregate of nominal size not more than 40mm inside fencing of RMU /transfromer manually without damaging any equipments, cable or parts spreading & levelling of finished gravel uniformaly in layers n. exc. 15 cm thick watered and rammed to true surface all as specified and directed
M&L Mild steel TMT bars 10mm dia and over , cut to length , bent to shape requirred including cranking, bending spirally for hooping for column , hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed for cable ducts and similar other works .
M&L reinfoced cement cement concrete (Nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate for duct cover , slab and similar work complete all as specified and directed. Note :- Rate is deemed to be included for neessary formwork , transportation and placing as per direction of Engr-in -charge .
M & L for cutting and removing grass, vegetation bushes , surface dressing etc from surrounding 4 pole/2 pole HT structure/tansformer/RMU/CSS and outside area of HT/LT installation and removing all rubbish to a distance not exceeding 50 m as directed.
Industrial Traders
Prime power system
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .