RENOVATION OF GANGA SINCHAI PURAM OFFICERS COLONY AND CONSTRUCTION OFTUBEWELL IN DISTRICT LUCKNOW

Amount

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Dismanteling of old plaster,or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metre lead

Dismanteling of floor to be stone flagged or tiled floor including base concrete and including stacking of dismantled materials as directed by the Engineer-in-Charge with in a distance of 60 m.

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer in charge with in a distance of 60 metre

Dismantling brick work manually /by mechanical means including stacking of servicable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. ( In Cement Mortar)

Dismantling R.C.C. work manually /by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metre lead. As per direction of Engineer-in-charge.

Class 150 Brick work in 1:4 cement mortar including all materials,labour and T&P etc. Complete.

Centering and shuttering for RCC work including rent of shuttering, material, labour and T&P required for proper completion of work for slab, and wall etc.

Steel reinforcemnet of R.C.C. Work including cutting , bending binding & placing in position including all cost of steel reinforcement bar , binding wire, etc., material , labour , T&P etc. Required For proper

Reinforced cement concrete work in walls (any thickness) including attached pilasters , buttresses, plinth and string courses, fillests, columns , pillars , piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttring finishing and reinforcement (1:1.5:3 (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm (nominal size))

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement , including cement sturry but excluding the cost of nosing of steps etc. complete.

Providing & Laying waterproofing treatment in sunken portion of W.C./Bathroom etc applying cement slurry mixed with water proofing cement compoubd consisting of applying (A) First layer of slurry of cement@ 0.488 kg/sqm. Mixed with water proofing cement compound @ 0.253 kg/sqm.. This layer will be allowed to air cure for 4 hours. (B) Second layer of slurry of cement @ 0.242 kg/sqm. mixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air cure for 4 hours folliwed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of joints, corners, junction of pipes and masonary with polymer mixed slurry. (C) 12 mm cement plaster in single coat in 1:6 (1 cement: 6 coarse sand) and integral water proofing compound.

P/laying vitrified floor tiles in different sizes (Thickness to be specified by the manufacturer with water absorbation less than 0.08% and cofirming to I.S. 15622 to approved make in all colour and shades laid on 20 mm thick cement mortar (1:4) cement mortar jointing with grey cement slurry @ 3.30 kg/sq.m. including grouting of joints with white cement and matching pigment etc. complete job. Size of tile 600X600 mm as Per D.S.R. item no. 11.41.2 Chapter 11 year 2016 /sq.mt.

Providing and laying Glazed Ceramic floor/wall tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying water proofing on roof after surface preparation applying DONCRETE A&B / Roof coat-AR / Supercrete-SB(IS:13435,part-), or equivalent (Epoxy Grout) polymer based coating (two pack system) @ 400 gm./Sqm. Second Layer @ 600 gm./Sqm. By brush and protective layer of 20mm thick cement: Coarse sand (1:4) admixed with Concrete Bond-101/ Warrior-W-4 or equivalent polymer (SBR Polymer) based bonding materials one kg. per bag of cement finishing the surface with neat cement and making of (300x300)mm square. the entire treatment will be taken up to 30cm. on parapet wall.

Providing & Fixing mosquito proof iron wire mesh with necessary wooden beading and all material/labour/ T&P etc. all compl. Of work.

12mm thick cement plaster with1:4 cement & C.Sand mortar

Scraping old white or colour wash including refuse as directed by engineer-in-charge with a 60m lead

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade old work (Two or more coats applied @ 1:43 ltr/ 10 sqm) over exsting cement paint surface (apex Ultima, weather coat All guard)

Painting & varnishing on peviously painted old steel work with one coat of ready mixed priming paint & one coat of approved superior quality redy mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work.

Malwa shifting by truck from site to 20 km. away

Rewriring Pointing for light with 1.5 sq.mm fr pvc insulated multistran copper conducter cable in pvc conduit pipe concealed in wall complete with 14 SWG Copper earth continuity wire & piano type switch and ceiling rose/Angle/Battan holder on 3mm thick phenolic luminiated backelite sheet etc. complete in allrespect. (Add for light / fan points with modular type switch in place of piano type switch.)

Rewiring Point for fan/ fresh air (light duly exhaust fan) with 1.5 sq.mm fr pvc insulated multistran copper conducter cable in pvc conduit pipe concealed in wall complete with 14 SWG Copper earth continuity wire & piano type switch and ceiling rose/Angle/Battan holder on 3mm thick phenolic luminiated backelite sheet etc. complete in allrespect.including matching colour wash.(Add for light / fan points with modular type switch in place of piano type switch.)

Wiring Point for Pluge with 1.5 sq.mm fr pvc insulated multistran copper conducter cable in pvc conduit pipe concealed in wall complete with 14 SWG Copper earth continuity wire & piano type switch and socket etc. complete in allrespect. Add for plug point with modular switch & socket in place of piano type switch & socket.

Rewriring Pointing for Call bell with 1.5 sq.mm fr pvc insulated multistran copper conducter cable in pvc conduit pipe concealed in wall complete with 14 SWG Copper earth continuity wire & piano type bell push or 2 pin socket etc. complete in allrespect including matching colour wash. (Add for Call bell point with modular type bell push in place of piano type bell push.)

Wriring Pointing for exhaust fan with 2.5 sq.mm fr pvc insulated multistran copper conducter cable in pvc conduit pipe concealed in wall complete with 14 SWG Copper earth continuity wire 15 Amp. piano type switch and ceiling rose on 3mm thick phenolic luminiated backelite sheet etc. complete in all respect.Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch.

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.

Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. 8 Module

Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. 2 Module

Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. 1 Module

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light complete including tube etc on surface complete in all respect.

supply and laying of aluminium conductor pvc insuleted armoured served sheathed cabls 1100 volts grade at a depth of 750mm below ground level over cushion of 75mm thich sand all around and protected with burned bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. or as per directed by engingineer incharge.70 sqm mm 3-1/2 core

supply and laying of aluminium conductor pvc insuleted armoured served sheathed cabls 1100 volts grade at a depth of 750mm below ground level over cushion of 75mm thich sand all around and protected with burned bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. or as per directed by engingineer incharge.10 sqm mm 2 core

Supplying & Fixing of surface /flush mountain 8 way SPN distribution board (Legrand Lexic) with additional metal door without MCB complete in all respect as directed at site.

Supplying & Fixing of 63amp. D.P. Isolator.

Supplying & Fixing of 6amp. To 32 amp. SPMCB(10KA)

Supply & fixing Cable LT ABC (3x120+1x95+1x16) sq.mm.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

P/F of Electronic fan regulator ( modular) 120-280 Volt ISI marked on the exixsting switch board including making connection, required meterial, labour and T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixing on wall face unplasticised Rigid PVC soil & water waste pipe conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm dia

Providing and fixing on wall face unplasticised PVC rain water pipe conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(II) Single socket pipe 75mm dia

Providing & fixing nahani traps with grouting including jointing with solvent cement cost of cutting and making good the wall and floors . 110mm Inlet & 75mm Outlet

Providing and fixing turminal guard for 110mm

Providing and fixing turminal guard for 75mm

Providing and fixing on wall face unplasticised PVC molded fittings and accessories conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5342, leaving 10 mm gap for thermal expansion. (I) Coupler 110mm Dia

Providing and fixing on wall face unplasticised PVC molded fittings and accessories conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5342, leaving 10 mm gap for thermal expansion. (I) Coupler 75mm Dia

Providing and fixing on wall face unplasticised PVC molded fittings and accessories conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5342, leaving 10 mm gap for thermal expansion.(II) Single socket pipe Coupler single "T" with door 110mm Dia

Providing and fixing on wall face unplasticised PVC molded fittings and accessories conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5342, leaving 10 mm gap for thermal expansion.(II) Single socket pipe Coupler single "T" with door 75mm Dia

Providing and fixing on wall face unplasticised PVC molded fittings and accessories conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5342, leaving 10 mm gap for thermal expansion.(II) Double socket pipe bend 87.5 degree 110mm Dia

Providing and fixing on wall face unplasticised PVC molded fittings and accessories conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5342, leaving 10 mm gap for thermal expansion.(II) Double socket pipe bend 87.5 degree 75 mm Dia

Providing & fixing unplasticised PVC pipe clip of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plug screwed with M.S. screwed for required length including cutting Brick work and fixing in cement mortar 1:4 and making good the wall etc. complete. 110mm dia

Providing & fixing unplasticised PVC pipe clip of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plug screwed with M.S. screwed for required length including cutting Brick work and fixing in cement mortar 1:4 and making good the wall etc. complete. 75mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (A) Internal work - Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia nominal outer dia pipes

Providing and fixing 45cm uplasticised PVC connection pipe with brass unions. 15mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing & Fixing brass Stop cock of approved quality 15mm nominal bore

Making conection of CPVC Distribution branch with CPVC of main following sizes by providing and fixing tee including cutting & threading the pipe 25 to 40mm nominal bore

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(A) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

(B) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid.

Earth work in excavation over area including disposal of excavated earth lead up to 50 m disposed earth to be lavelled & neatly dressed. In all kind of soil up to 1.50 m depth

Earth work in excavation over area including disposal of excavated earth lead up to 50 m disposed earth to be lavelled & neatly dressed.

Providing & Laying of Cement conc. In base excluding the cost of cement & shuttering by 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing M.S. Foot rest including fixing with 20x20x10 cm. Cement conc. Block 1:3:6 (1 Cement : 3 C.sand : 6 graded aggregate) of nominal size 20 mm as per standered design with 20x20 mm square bar

Providing & fixing of 75 mm dia Vent pipe

Providing & fixing of 75 mm dia Slotted Cow (Terminal Guard)

Providing and fixing in position pre-cast R.C.C. Manhole cover and frame og required shape and approved quality M.D. -10 circular shape 500 mm interna: diameter.

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks and S.W. Drain pipe 100 mm diametre 1.8 m long complete as per standard design. 19.32.1 with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 D.

Excavating trenched of required width for pipes, cables, etc including excavation for sockets, and dressing of side, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required , in layers not exceeding 20 cm in depth , including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m pipe 80 mm to 300 mm dia

Providing and Fixing on wall face unplasticised Rigid PVC soil & water pipe conforming to IS : 13592 TypeB, including jointing with seal conforming to IS : 5382, leaving 10 mm gap for thermal expansion , (i) Single socketed pipes. (A) 110mm diameter

Providing and Fixing on wall face unplasticised Rigid PVC soil & water pipe conforming to IS : 13592 TypeB, including jointing with seal conforming to IS : 5382, leaving 10 mm gap for thermal expansion , (i) Single socketed pipes. (B) 160mm diameter

Providing & Laying of Cement conc. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all -round Rigid PVC pipes including bed concrete as per standard design

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg. and frame to be not less than 2.70 kg. as per standard design. (A) 150x100 mm size P Type

Construction brick masonry manhole in cement mortar 1:4 (1 cement : 4coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size ) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 agraded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design .(A) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Light duty) 455x 610 mm internal dimensions, total weight of cover and frame to be not less than 38kg. (weight of cover 23kh. and weight of frame 15 kg.)

Fabrication of mild steel / iron work in grill, gates, cutting, door and window frames including cutting, drilling, welding, / reveting and hinges, where necessary and fixing in position including cost of all materials, labour T&P etc. required for proper completion of work with one coat of red oxide primer. Door (0.85 x 1.90 )

Fabrication of mild steel / iron work in grill, gates, cutting, door and window frames including cutting, drilling, welding, / reveting and hinges, where necessary and fixing in position including cost of all materials, labour T&P etc. required for proper completion of work with one coat of red oxide primer. Window (1.20 x 1.20)

Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and displaying of Rhapis Palm plant, having ht. 75 cm to 90 cm with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top in 35 cm PVC Pots/C.Pots & as per direction of the officer-in-charge.

Providing and displaying of Areca Palm plant, having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Mangifera indicia (Mango-grafted ) height 60-75 cm. in big poly bag size 25 cm

Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pot of size 25 cm

Construction of a Tubewell in officer's Colony Ganga Sichai Puram Telibagh.

Supply of the 25 HP KSB make Submersible Motar Pumset Model BPHA 333/4+HBC253

Installation of the 25 HP KSB make submersible motar pumset Model BPHA 333/4+HBC253

IVC make Ci non rising Sluice valve without Gearbox 150mm

Supply of ISI marked, steel tuble used for water wells of type-electric resistance welded (ERW) GRADE FE 410, PLAIN End, nominal bore 150 mm, wall thickness 7.1 mm, weight 28.2 kg/m in length of 3 metres, conforming to IS: 4270/2001 (Third Revision) with its latest amendment if any and department technical specifications.

Supply of Screwed double flanged centrifugally cast (spum) C.I. Pipe of Class B Conforming to IS : 1536, -150 mm dia

Supply and wiring of 3 numbers 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy guage rigid steel conduit on surface , with two number 14 SWG copper earth continuity wire etc. complete in all respect.

Supply and wiring of 4 numbers 25 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 50 mm dia heavy guage rigid steel conduit on surface , with 2 number 10 SWG copper earth continuity wire etc. complete in all respect.

S&F of 200 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.

Cleang of underground sump, over head RCC tant (independent stassing including disposal of silt and rubbish, all as per direction of engineer incharge. The cleaning shall consist following operations.

SHIVAM ENTERPRISES (BID ID -4719452)