85798SPECIAL REPAIRS TO INTERNAL ROAD, HARD STANDING AND ROAD FURNITURE AT ALC UNDER GE (SOUTH) PUNE.

Amount

M&L for repair to pot holes any depth, n.exc. 1.00 sqm each including sweeping free from dust and mud or water, for scoring sunken surfaces in road paths etc, cutting around edges to at least 25 mm in depth and making good by filling in screened and graded road metal, applying tack coat with bituminious primer of 5 kg per 10 sqm putting in providing bituminious premix asphaltic semi dense concrete (design mix) to 25 mm consolidated thickness with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area exceeding 400 Sqm and exc 50 mm and n. exc 100 mm in depth and removing the same to a distance n exc 50 m and stacking where directed complete all as specified and as directed.

M&L for Premix bituminous macadam any thickness with 4% binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 12 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 7.5 cm (compacked thickness) with sand stone coarse aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) , spread, rolled and consolidated to gradient and camber required using with granite trap or basalt type aggregate and using 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparing of unsurfaced water bound macadam /scarifying surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 10 kg per 10 Sqm and providing bituminous premix asphaltic semi-dense concrete using paving bitumen (VG-30 grade) , 40 mm thick (consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix) using mechanical paver rolled with 8 to 12 tonne power roller and compacted to required camber and gradient to an uniform smooth surfaces complete all as specified and directed.(Note : Quantity of bitumen shall be provided as per design mix approved by GE.)

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with mechanical compressure to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade ) @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and directed. Note : Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.

M&L for moorum or red bajri (average thickness 75 mm thick) spread, rolled, watered and consolidated to gradient and camber required as in side berms complete all as specified and directed.

S&F in repairs precast kerb stone, using PCC Type B0, 1:2:4 (20 mm graded stone aggregates) set in cement mortar 1:6 complete including necessary excavation, tamping ground and removal of surplus soil to a distance not exceeding 50 m complete all as specified and as directed.

S&F in repairs LED plastic kerb stone of following specification :- size 500 mm x 220 mm x 150 mm thick, Curb angle-45 degree, Foundation stand length-215 mm, Foundation stand width - 30 mm , Foundation stand hole dia 10 mm, Load carrying capacity - 1200 kgs, LED strip length - 280 mm, LED wattage- 3 watt, Operation voltage - 110 V, No of LED in each strip - 24 Nos, LED mounting plate 320 mm x 48 mm x 5 mm thickness 02 core Connector wire - 02 Nos of length 220 mm, waterproof connectors 02 Nos, Colour as desired etc all as specified and directed by Engineer-in-Charge.

M&L for preparation of black top surfaces of road and applying 2 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow including putting glass beads of standard size by drop method complete all as specified and directed by Engineer-in-Charge.

S&F in repair, plastic Glass Beads Reflectors Cat Eyes made of body materials ABC plastic size 117 mm x 117 mm x 23 mm reflector 19 or 20 BI glass elements on each side with compressive strength upto 35 tonnes, yellow/ red colour body with reflector fixing by epoxy complete all as specified and as directed.

Demolition of cement concrete any type description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of stone slab & tiles of any description or thickness laid, bedded and pointed in cement mortar in floors,hard standing,aprons etc complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) ,type D-2 (using 40 mm graded stone aggregate) as in sub base/ flooring etc complete all as specified and as directed.

Demolition of brick / PCC block / stone masonry, built in cement mortar complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on brick surfaces, finished even smooth with neeru finish complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in benching, coping, kneelers, apex stone, bed plates, kerb etc complete all as specified and as directed.

M&L for precast chequered cement concrete tiles, glossy finish of size 305 mm x 305 mm x 25 mm thick, confirming to IS 1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for machine pressed precast cement concrete reflective type interlocking tiles, paver blocks, any shape and size as approved, 60 mm thick, confirming to IS 15658-2006, M-35 grade in floor / pavement laid over and including 25 mm thick stone dust/grit cushioning laid dry to the profile complete all as specified and as directed.

SUBHADRA ENGINEERING AND FABRICATOR

M/S BHASKAR MANIKRAO PAWAR

MOHANLAL MATHRANI CONS. PVT. LTD.