SPL REPAIR OF BLDG P-05 OR MD ACCN AT KHETRAPAL ENCLAVE OF MECH INF AND OTHER SANCTIONED WORKS AT NAMS

Amount

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F 35mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed. ISI Marked.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing for item No 879 in SSR part II 2020

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F Aluminium door stopper double support with rubber.

S&F MS sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on steple plate and fixed to 250mm long.

Material & labour for two coats of synthetic enamel painting over a coat of pink primer to new wood or wooden based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work conform-ing to Fe 290Gde E-165 complete.

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 12 mm square guard bar, 10 cm centre to centre.

(h) 25x4 mm flat iron all around for joint of both frame. (j) One shop coat of red oxide primer and two coats of Synthetic enamel paint to MS window and guard bar Note: (i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. (ii) sheet glass and wire mesh shall be measured and paid separately)

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated)of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. (a)10mm Sq Guard bar 10Cm C/C (b) One shop coat of red oxide primer and two coats of Synthetic Enamel piant to MS ventilator and guard bar Note:- (i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B-0 including hold fast PCC (four No’s for Each ventilator) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. (ii) sheet glass and wire mesh shall be measured and paid separately)

Material & labour for two coats of synthetic enamel painting over a coat of red oxide to new steel or steel based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

S&F stainless steel wire cloth 0.18mm nominal dia of wire and average width of aperature 1.40mm with 8% nical fixed with tinned tacks or galvanised wire stapler complete.

S&F repair 3mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pan incl hacking out glass old complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in Sqm n.exc 0.50 each pan complete all as specified.

Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.note -rate applicable upto four storey height incling all scaffolding work

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair complete all as specified and directed. (WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions). note -rate applicable upto four storey height incling all scaffolding work

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for wall care putty of 2mm thickness over plastered/Unplastered surface to prepare the surface even and smooth complete all as specified and directed. Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.

Supply only liquid WPC complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises.

S&F non skid ceramic coloured tiles 7 to 8mm thick (square) size of tile exceeding 300x300mm in floors etc set and jointed in neat cement slurry and pointed inwhite or coloured pigment to match the shade of tile over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4.

M&L for glazed ceramic coloured/printed / dark tiles size s of size 450x350x7mm thick on vertical surface in skirting /dado etc. ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC all as specified.

S&F rotational moulded polythene, triple layers, water storage tank other than black colour 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod and dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and directed

S&F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S&F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S&F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S&F in repair brass chromium plated shower rose with Arm length not less than 150mm swivel joints size 125mm with arm fixing to steel pipe or union incl taking down U/S Shower.

S&F tubular towel rail 600mm long, 20mm dia 'D' type CP rail with fixed in wall.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed Note flush tank can be conceiled in wall if reqd i.e in the case of wall hung type water closet pan

Supply and fixing vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC (SWR) P trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified. Note :- Flush pipe and flushing cistern to be measured and paid separately.

S&F PVC connection 15mm size with PTMT nuts of length 450mm.complete all as specified

S&F in repair sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs, washers,wastes coupling,waste pipe including bedding in cement mortar on to wall or including fixing cantilever brackets or chase cut and fixing the sides as required as per site complete with overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 750mm X750mmx250mm deep made of stainless steel ,weight not less than 7.5 kg with folded edges glossy finish complete all as specified and directed.

S&F in repair PVC grating 125mm dia circular of approved make and fixing with cement mortar 1:3 complete all as specified and directed.

S&F in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber/steel frame work (incl 2 Nos 100mm aluiminium handles, 1 Nos 100mm hasp & staples for each shutter) complete all as specified and directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

M&L for Granite (of any type) 20mm thick over cement screed bed laid on 10 mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps,riser,cooking platforms incl rubbing and polishing incl moulding rounding to edge of granite & dismantling complete all as specified and directed.

S&F curtain rod 25mm bore of 1mm wall thickness made off stainless steel fancy type decorativewith decorative ball type side brackets and knobs including taking down old any type curtain rod complete all as specified and directed.

S&F in repars 15mm stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe

S&F in repars 20mm stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe

Taking down 15 mm bore steel tubing and connections including cleaning or removal from site

Taking down 20 mm bore steel tubing and connections including cleaning or removal from site

S&F 15mm GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors at as specified and directed

S&F 20mm GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors at as specified and directed

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

Description all as per ser item No 54.00 above but except brick

Dismantling of brick tiles single layer on roof, jointed and grouted/pointed in cement mortar including cleaning serviceable tiles and stacking properly for reuse, disposal of unserviceable tiles and debries/rubbles from site complete all as specified and directed.

Demolition of Mud in roofs , any thickness,including plastering and leeping (whether full thickness removed or only a part thereof complete all as specified and directed.

M & L for PCC (1:2:4) type B-0 (12.5 mm graded stone aggregates) as in roof kerbs, sloping padding in roof slab or mud stops, rounded or chamfered on edges

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc including APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof and sunken portion on bitumen surfaces by forced application including chase cutting in roof and making good with CM(1:4) complete complete all as specified and directed.

M&L for 40 mm thick brick tiles laid over 15 mm thick screed bed in cement mortar 1:6 and jointed, grouted flush in cement mortar 1:3 mixed 5% of crude oil of by weight of cement on roof padding flush pointing in CM 1:3 complete all as specified and directed

Description all as per item No.60.00 here-in-before but exept brick tiles

S&F in repairPVC (SWR) bend 110 mm with access door complete all as specified and directed.

S&F stack clamp out of 50mmx5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing end of stay to wall or roof 100mm all as spicefied and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall complete all as specified and directed.

M&L for 110mm bore of pipe PCC 1:4:8 type D-2 concrete bed to drain pipes including packing under and hauching against the sides of pipes after they are laid complete all as specified.

S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75/100mm complete all as specified and directed.

M&L for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

S&F PVC(SWR) vent cowl 110mm dia complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement incl dismantling / demolition and rubbish off the premises etc complete all as specified and directed.

M&L 75mm thick cement concrete Type D-2 1:4:8 using 40mm graded stone aggregate as in sub base complete all as pecified as directed.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 20 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry and joints pointed in white cement mixed with coloured pigment complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any situation floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of painting as existing in building to match with the existing surfaces complete all as specified and directed.

M&L for demolition of cement concrete as in sunken floor of bath,wc and kitchen of any description and any position not otherwise specifically provided complete

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately)

M&L cement concrete in foundation above filling and mass concrete type F2 1:7:12 (40mm graded agg) as in sunken floor complete all as specified and directed.

Dimantling of asbestos cement corrugated/semi corrugated sheets in roof covering all as specified and diriceted by engr-in-charge.

S&F for Pre- painted galvaume aluminum zinc coating GI based manglore/trapezoidal/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding, fixed with self tapping screws as incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.63mm thick of any colour in roof covering/cladding/ ridge hipe valley to wall, fixed with self tapping screws as specified

Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M & L for Point wiring in replacement with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in old PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

One light / bell piont/ Fan point/ Exhaust fan point controlled by one 5 Amp switch one way.

Description all as per Srl item No 78.00 above but on the Indepedant board completeall as specified

Description all as per Srl item No 78.00 above but on the same board completeall as specified

Description all as per Srl item No 78.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm size cable multi stranded FRLS copper wire connecting to common earth dolly complete.

Supply and fixing in replacement switch piano type 6 Amps one way 230 volts 50 hz AC complete all as specified and as directed.

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts 50 Hz AC complete all as specified and as directed

Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts 50 Hz AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts 50 Hz AC complete all as specified and as directed

Supply and Fixing in replacement switch type regulator 5 step 230 volts 100 Watt AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65/50 mm two to three terminals complete all as specified.

Supply and fix in replacement MCB 40 Amps single pole with neutral, AC 230 Volts 50 Hz complete all As specified and directed.

Supply and fix in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed.

Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used single door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Description all as per Srl item No 92.00 above but for 4.0 sqmm

Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

S & F in repairs, installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made Meter Panel including cutting the wall to make concealed including cement work and color wash to match with exiting. The Panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4:Meter Panel (Mini. Size 600 x 600 x 170 ) Wall Mounted type on Mounting Structure RAL 7016. The Meter Panel should be anti-acid, anti corrosive & Fully Transparent Door for meter Vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of his CPRI TEST REPORTS with Short Circuit Test IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane and Enclousers make Hensel/Clipsal. The manufacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1.

The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. The panel should passed glow wire test 960oC in accordance with 60695-2-11 [flame retardant and self-extinguishing. One Main Incomer MCCB 100A TP 25KA Thermal /Magnetic Release with spreader link. MCCB/MCB Nob Operated by Flip Cover. Indicator Provided on each phase. Provision of Four Nos Single Phase Sub-Meters in Panel. Provided Output supply by MCB DP 40Amp 4 Nos. Meter Enclosures & Enclosures Accessories as per RAL 7035. Ten Nos Terminal Blocks Provided for output Supply all as specified and as directed. Make- Hensel/Rittal/Emitter/Schneider/ABB. NOTE:- Rates of main incomer MCCB 100 AMP and MCB DP 40 AMP 4 Nos is included in quoted rate and no extra paymentwill be made for it.

Supply and fixing in replacement of LED T-8 tube light fitting with single side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated three core 23/0.0076 twisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Supply & fix LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

Supply, laying in trenches or wall including GI protection pipe and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Excavation trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for and getting out in any of soil.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified.

Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc.. all as specified and directed by Engr in Charge of size 63mm outer dia and 50 mm inner dia.

Supply and lay on wall/ floor etc GI pipe Light grade of dia 32 mm for protection of cable all as specified and directed.

Taking down ceiling fan/geyser/exhaust fan in situ and refixing after servicing, repairing and painting to ceiling fan scratching old paint and preparation of surface for painting with one coat of white / grey enamelled paint and including cable from ceiling rose to fan complete all as specified and as directed.

Taking down old meter and refixing them in new meter panel and make necessary connection to bus bar and MCB DPs in meter panel.

S & F in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 amps complete all as specified and as directed.

Supply and fixing in replacement of bell push 6 amps one way 230 volts 50 Hz AC complete all as specified and as directed.

Supply and fixing in replacement of bell ding dong AC 230 volts 50 Hz complete all as specified and as directed.

Supply and fix exhaust fan, PVC body single phase 230V of size 220 mm sweep with blades, frame and louvers all as specified and directed.

Supply and fixing in replacement pvc connection of size 600 mm length 15 mm dia all as specified and as directed.

S & F in replacement of LED bulkhead light fittings 10 watt white including LED strip as per IP 65 in engineering plastic housing with clear primatic diffuser and making necessary connection complete all as specified,

Supply and Fix Storage water heater (Geyser) of 25 litre capacity 230V AC, 50HZ having element of 2 KW of COPPER/INCOLOY alloy , Rust proof outer body,high density PUF insulation, BEE 5 Star Rated ,Inner tank of SS 304 which can sustain pressure of minimum 7 Bar working pressure and having multifunction safety valve plug top , making electric and water connection complete all as specified.

Supply and fixing of brass chormium plated angle valve, fancy type of size 15mm dia screwed down for high pressure, complete all as specified and directed.

Supply and fixing of PVC Connection (Hot) of size 15 mm x 600 mm complete all as specified.

Supply and fixing Brass chromium plated fancy type bib tabs of size 15 mm dia bore short body, screwed down for GI pipe or for brass ferrule and fixed complete all as specified

M & L for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 2.5 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 2.5 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed.

Supply and fixing galvanized iron steel tubing medium grade 15 mm bore with all fitting and fixed to walls, ceiling and laid in floor complete all as specified Note- Quoted rate will include the cost of making water connection from existing supply line and making good of the wall surface etc all as specified.

Supply and fixing galvanized iron steel tubing medium grade 15 mm bore with all fitting and fixed to walls, ceiling and laid in floor complete all as specified Note- Quoted rate will include the cost of making water connection from existing supply line and making good of the wall surface etc all as specified.

GEE EMM ASSOCIATES (BID ID -3091408)

M/s MAHAJAN CONSTRUCTION CO. (BID ID -3077921)

Mahajan Builder (BID ID -3078075)

sandhu builders (BID ID -3079759)

Chander Mohan Arora Contractor (BID ID -3078026)

tarvinder singh (BID ID -3078172)

Roop Sons and Co (BID ID -3079058)

M/s Vijay Construction Co. (BID ID -3077977)

tarlok singh contractor (BID ID -3077944)