Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹84.7 L
EMD Value
₹1.7 L
Closing Date
18 Mar 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka State Road Transport Corporation
Somashekariah
Construction of Gents Crew Rest Room at Depot 2 ( Ground Floor and First Floor For Both depot-2 and Depot -4 Crew) , BCD, Bangalore
KSRTC/2023-24/BD/WORK_INDENT65
KSRTC/2023-24/BD/WORK_INDENT65
Open
Buildings
Two Tender Document System(Two Cover)
Karnataka State Road Transport Corporation Office Bengaluru
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To Qualify for award of this contract the Tenderer must have valid Class -I Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification.
To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name Satisfactorily completed at least one Similar Civil work i.e.,building Work costing not less then Rs.42.38 Lakhs during the last 5 years i.e, the work must have commenced on or after 01-04-2018 and completed till last date of submission of tenders. Work Done Certificate shall clearly mention the Date of commencement and date of completion shall be included in the Tender Notification for Clarity.
To Qualify for award of this contract the Tenderer Executed in any one Financial year during the last 5 years (i.e, during the years years 2018-19 ,2019-20,2020-21 , 2021-22 & 2022-23 ), the following minimum quantities of work in any of the Government / Public Sector Undertaking. To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name Executed in any one financial year during last five years i.e. years 2018-19 ,2019-20, 2020-21, 2021-22 & 2022-23 the quantities of works mentioned below. 1. RCC M20 & above :136.43, 2. TMT/MS Steel:15.60 Tonne, 3. BBM/Solid Block: 69.62Cum, 4. Plaster:1255.16 Sqm
To Qualify for award of this contract the Tenderer in his name should have, in the last five financial years (i.e. during the years i.e 2018-19 , 2019-20, 2020-21, 2021-22 & 2022-23 achieved in at least two financial years a minimum financial turnover of Rs. 84.75 Lakhs (in all classes of civil engineering construction works only ).
Liquid assets and or availability of credit facilities of not less than Rs. 25.50 Lakhs (credit lines /letters of credit /certificates from Banks) for meeting the fund requirement etc. (usually 30% of the amount of contract in the prescribed format )
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity is ( (Ax N x 2.5) - B) Where, A is Maximum value of Civil Engineering works, (updated to the financial year of Tender invited), executed in any one year during the last five years. (Completed as well as works in progress). B is Value at price level (updated to the financial year of tender invited) of existing commitments and ongoing works to be completed during the next two years. N is Number of years prescribed for completion of the work for which tender is invited.2.5 is Multiplying factor for assessing the available tender capacity for works costing upto Rs.100.00Lakhs.
₹2,120
₹1.7 L
9 Mar 2024
9 Mar 2024
19 Mar 2024
12 Mar 2024
Construction of Gents Crew Rest Room at Depot 2 ( Ground Floor and First Floor For Both depot-2 and Depot -4 Crew) , BCD, Bangalore
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.Asbestos cement sheet / G.S. She...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engin...
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 m :19.15.1 Of sectional area 40 cm² and above v-2/p 188/item no -19....
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavatio with all lifts and lead, transportation to site, spreading, ...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (SR VOL 2 PG 9/5.4) ---- All bidders are instructed to adhere the Notification of ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2No.s of 150mm long brackets...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to op...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...
Providing 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:6 (1 cement: 6 fine sand) to brick masonry including rounding off corn...
Providing 15 mm cement plaster with Cement mortar 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermos Plastic Elast...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved m...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (SR...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mo...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SRP v-2/ 132/14.7.1) ---- All bidders are instructed to adhere the Notification of Tender Invited and other...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (SRPv-2/ 131/14.1.1) ---- All bidders are instructed to adhere the Notification of Tender Invited and oth...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complet .SRP v-2/127/13.58) ---- All bidders are instructed to adhere the Notificat...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complet SRP v-2/127/13.59) ---- All bidders are instructed to adhere the Notificat...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :SRP v-2/117/13.5.3) ---- All bidders are instructed to adhere the Notification of Tende...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :SRP v-2/117/13.4.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and o...
Providing and fixing brass bib cock of approved quality SRP v-2/117/13.2.2) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall b...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing & Fixing 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g.each 356.0 SRP- Vol-II (137/14.40.2) ---- All bidders ar...
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Nos. 493.00 SRP- Vol-II (119/13.16) ---- All bidders are instructed to adhere ...
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.Nos. 674.0 Vol-II (119/13.14) ---- All bidders are instructed to adh...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to op...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...
Providing 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:6 (1 cement: 6 fine sand) to brick masonry including rounding off corn...
Providing 15 mm cement plaster with Cement mortar 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved m...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (SR...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mo...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (BESCOM Part-III/P-5/2.2.2) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender...
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box (BESCOM Part-III/P-5/2.2.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender ...
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and run...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
do. 4-5Way(BESCOM Part-III/P-8/3.4.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
do. 6Way(BESCOM Part-III/P-8/3.4.4) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
do. 8Way(BESCOM Part-III/P-8/3.4.5) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
do. 10-12Way (BESCOM Part-III/P-8/3.4.6) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
do. 16Way (BESCOM Part-III/P-8/3.4.7) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
do. 4 Module (BESCOM Part-III/P-8/3.5.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
do. 6 Module (BESCOM Part-III/P-8/3.5.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 8 Module(BESCOM Part-I/P-8/3.5.5) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 10-12 Module (BESCOM Part-III/P-8/3.5.6) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 16 Module (BESCOM Part-III/P-8/3.5.7) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(BESCOM Part-III/P-9/3.6.1 ) ---- All bidders are instru...
Do- 6Amps 3way socket (BESCOM Part-III/P-9/3.6.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- Stepped Fan Regulator. (BESCOM Part-III/P-9/3.6.4) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 32Amps DP switch (BESCOM Part-III/P-9/3.6.9) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 6/16Amps universal socket (BESCOM Part-III/P-9/3.6.10) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying and fixing metal Fan box with Round Hook. (4/1.13) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...
Do- 32mm(BESCOM Part-III/P-3/1.9.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS (...
Do-2.5 sqmm(BESCOM Part-III/P-5/2.3.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 4 sqmm (BESCOM Part-III/P-5/2.3.4) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 6 sqmm(BESCOM Part-III/P-5/2.3.5) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 10 sqmm(BESCOM Part-III/P-6/2.3.6) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ ...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.(BESCOM Part-III/P-230/6.1) ---- All bidders are instructe...
Fixing all types and all capacities fluorescent / CFL / false ceiling fixtures indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round...
Supplying and fixing 32mm dia class A GI pipe bracket upto 2.7 meters long for fixing MV/SV/MH/FTL street light fitting of all capacities on wall using suitable clamps, bolts and nuts and wiring using...
Fixing halogen/metal halide/SVL/IL floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires (45/13.5) ---- All bidders are instructed...
Fixing a ceiling / wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23/0.0076 inch PVC insulated...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5Amps ceiling rose with sufficient length of 23/0.0076inch PVC insulated twin core wire of approved make. (BESCOM...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
40Amps DP(BESCOM Part-III/P-17/5.18.5) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
6-32Amps TPN(BESCOM Part-III/P-17/5.18.7) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
40 Amps TPN((BESCOM Part-III/P-17/5.18.8) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...
Do- 8Way SP &N(BESCOM Part-III/P-18/5.19.8) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 12Way SP &N(BESCOM Part-III/P-18/5.19.9) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Do- 160Amps 25kA.(BESCOM Part-III/P-17/5.15.11) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying fixing and wiring rotary selector switch suitable for voltmeter (29/5.28) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, th...
Supplying fixing and wiring rotary selector switch suitable for ammeter (29/5.28) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (BESCOM Part-III/P-19/5.34) ---- All bidders are instructed to adhere the Notification...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (BESCOM Part-III/P-19/5.38) ---- All bidders are instructed to adhere the N...
Supplying fixing and wiring 3 digital ammeter / voltmeter. (29/5.29) Make: L&T / Meeco / C&S ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherw...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip (BESCOM Part-III/P-54/12.58.3) ---- All bidders are instructed to ad...
25x6mm Copper strip (BESCOM Part-III/P-54/12.58.3) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 600x600x3mm Copper plate(BESCOM Part-III/P-54/12.58.11) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(BESCOM/P-52/ 21.05) ---- All bidders ar...
Supply and laying double walled corrugated (DWC), HDPE pipe with necessary connecting sockets / Couplings/Tees/ Bends of same materials in existing trench as per IS 14930 part- II Suitable for drawing...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 16 sqmm.(43/6.17.6) ---- All bidders are instructed to adhere the Notification of Tender Invited ...
Do- 25 sqmm Long Barrel. (43/6.17.7) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 50 sqmm Long Barrel. (43/6.17.8) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 70 sqmm Long Barrel. (43/6.17.9) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Do- 95 sqmm Long Barrel. (43/6.17.10) ---- All bidders are instructed to adhere the Notification of Tender Invited and other tender norms. Otherwise, they shall be disqualified.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-3 BCDrestROOM.doc
Tender Document • 0.97 MB
TenderNotification-19-BCDcrewRESTroom.docx
Tender Document • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .