Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹16.2 L
Closing Date
3 Jun 2026, 3:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work excluding zonal works.
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
(A) Hyderabad Division: KRNT: Construction of New Type-II quarters (12 Nos.) (IRPSM ID : 11.03.51.25.3.52.001) (B) HYB Division: Provision of Staff Quarters (Ty-II-06Nos. & Ty-III-06 Nos at KRNT station on replacement accounts (IRPSM ID : 11.03.51.25.3.52.003)
55_DRM_W_HYB_26
55_DRM_W_HYB_26
Open
Works - General
12 Days
Hyderabad, Telangana
₹0
₹16.2 L
3 Jun 2026
8 May 2026
20 May 2026
261 items across 6 schedules · ₹9,49,39,790.35 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supplying and fixing premium quality Table top Wash Basin of size 485X370X110 mm or desired size, colour Snow White of standard make: Parryware / Johnson / Hindware/ Jaquar as desired by Engineer in charge with all contractors transportation, materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 25.00 | 8,866 | 2,21,650 |
| 2 | Supplying and fixing looking mirror 6mm thick with polished beveled edges fixed on stainless steel studs with all contractors men, materials, tools and plants, all lead and lift, taxes etc., including scaffolding and as directed by the Engineer-in-charge at site. | Sqm | 25.00 | 2,688 | 67,200 |
| 3 | Supply, errection and commissioning of hot pressed moulded thermosetting glass Fibre reinforced polyester resin (GRP) sectional water storage tanks confirming to IS 14399 (Part - I & II) on Railways existing staging/roof top including all accessories like external bracing, L brackets, manhole & drain panel assembly etc., including providing and fixing required fittings for inlet, outlet/delivery, drain and outflow pipes with all contractors labour, tools and plants, material, all lead & lift taxes complete for tanks of height 1M- For a capacity Upto 10,000 Litres | Litre | 12000.00 | 34.38 | 4,12,560 |
| 4 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- Up to a depth of 100 meters. | RM | 200.00 | 321.9 | 64,380 |
| 5 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 101 - 150 meters. | RM | 100.00 | 548.69 | 54,869 |
| 6 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 151 - 200 meters. | RM | 100.00 | 834.02 | 83,402 |
| 7 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 201 - 275 meters. | RM | 75.00 | 1,207.13 | 90,534.75 |
| 8 | Providing Ornamental work for elevation on Brick/Stone masonry/Concrete Surfaces at all heights/Floors of any structure for vertical/slant walls, curved and RCC drops etc., in cement mortar 1:3 (1 cement: 3 Fine sand) of desired pattern by mode of applying minimum 20 mm thick cement mortar and made the design/patty/curving etc., by cutting/engraving/curving/stepped patty etc., including brick offsets if required as per the approved plan submitted by Railway and as decided by engineer-in-charge with all contractors labour,tools,materials,shutter/staging/scaffolding,curing,cement,taxes including all finishing's by final coat of cement slurry as directed by the Engineer-in-charge at site. (Elevation surface area measurement to be done for payment without any deductions) | Sqm | 108.00 | 1,714.6 | 1,85,176.8 |
| 9 | Providing and fixing on wall face unplasticized Rigid PVC Soil Waste pipes conforming to IS:13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer-in-charge at site. - 75 mm dia | RM | 43.00 | 538.22 | 23,143.46 |
| 10 | Providing and fixing on wall face unplasticized Rigid PVC Soil Waste pipes conforming to IS:13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer-in-charge at site. - 110 mm dia | RM | 43.00 | 762.96 | 32,807.28 |
| Schedule total | ₹12,35,723.29 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SPECIALCONDITIONSOFWorkKRNTTY-IIIIIQuaters.pdf
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf Approved brand
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .