PERIODICAL SERVICES TO OTM BUILDINGS, COMPOUND WALL, GATE AND REPAIRS TO AREA DRAINAGE AT SHIBPUR

Amount

M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of white wash complete.

M&L for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coat of white wash complete.

M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of cement based paint complete.

M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of distemper oil emulsion paint complete.

M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of antifungal exterior emulsion weather proof paint complete.

M&L for preparing old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete.

M&L for preparing old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris to a distance exceeding 500 mts and depositing where directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified.

M&L for rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion paint over a coat of alkali resistant priming paint complete.

Demolition of brickwork or stone/ boulder masonry or PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris to a distance exceeding 500 mts and depositing where directed.

M&L Pre-cast cement concrete Type C1, 1:3:6 (using 20mm graded crushed granite stone aggregate), block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

M&L PCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in copings, kneelers, apex stones, bed plates, levelling course, kerbs water troughs and the like including use of formwork, weathering, slightly rounded or chamfered angles and throating, finished even and smooth without using extra cement all as specified.

M&L for PCC Type B2, 1:2:4 (using 40 mm graded granite stone aggregate) as in surface channels and drains complete.

M&L for PCC Type D2, 1:4:8 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

M&L precast RCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in CM 1:6, including necessary formwork complete. Note: Reinforcement shall be measured and paid separately.

M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for providing steel formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for flat fair finished surfaces of concrete all as specified.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. (Inner girth only shall be measured).

Desilting of storm water drains including dewatering and removing soil/ muck to outside the MD land and depositing where directed.

Excavating in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/ loose soil.

Removing excavated soil material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil.

kakolil trade agencies

RADHA GOVIND CONSTRUCTION

Binod Hawlader

KML CONSTRUCTION

bansal construction

DHAKSHNA MOORTHY AND SON

CITY CONSTRUCTION COMPANYU