FOR THE WORK SANCTIONED UNDER NAGAR NIGAM SYSTEM STRENGHTENING SCHEME

Amount

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa Lohd`r 11 ds0oh0 iks"kdksa ds i`FkDdj.k ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

3x185 mm2 XLPE 11 KV

Cable jointing kit 11 KV XLPE 3X185 sq mm

S.T. Pole 11 Mtr. Long

11 KV Dropper Channel

11 KV Top Channel

11 KV Pin Insulator

11 KV pin with net

11 KV Cross arm

ACSR Dog Conductor

11 KV Disc insulator with fitting

11 KV T-Off Channel

Stay Complete

Earthing Complete

11 KV VCB O/G CTR 200/100/5A, 350 MVA

Supply of following material/fitting complete in all respect :-

HDPE Pipe dia 6' inch PN 6 PE 8

C.I Pipe dia 250 mm

11 KV F bracket

Holding clamps for top, dropper, t-off etc

Nuts & Bolts off size

G.I Pipe dia 6' inch

The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Single Pole with fixing of necessary clamps & accessories as per required (if required) . All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor

Earthing of STP Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.

Laying of 11 KV XLPE 3x185 sq. mm by HDD method as per RESPO norms As well as crossing of cable through Railway Track by laying C.I. Pipe 250 mm dia (C.I. Pipe 250 mm dia supplied by Contractor)

Laying of HDPE Pipe 6' inch Diameter for laying of 11 KV 3x185 sq mm XLPE Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 6' inch dia with elbow and socket for 11 KV cable will be supplied by contractor)

Laying and dressing of under ground 11 KV 3x185 sq mm XLPE Cable into HDPE Pipe (Wherever required) by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Erection of 11 KV XLPE Cable 3X185 mm² Jointing Kit with complete work

Making loop & Hoisting of 11 KV XLPE Cable Providing 6'' Dia GI Pipe 3 M Long with complete Work

Fabrication, errection, commissioning & Testing of 11 KV VCB O/G CTR 200/100/5A, 350 MVA

Earthing of 11 KV VCB O/G CTR 200/100/5A, 350 MVA

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa Lohd`r ttZj ,0ch0 dsfcy dks cnyus@{kerk o`f) ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

LT AB Cable (3X150+1X120+1X16) sq mm

LT AB Cable (3X120+1X95+1X16) sq mm

LT Three Phase Distribution box

LT Cable 1X35 sq mm

Supply of following material/fitting complete in all respect :-

Clamp for LT Three Phase DB Box with Nuts & Bolts

Suspension Clamp with I hook (Insulated)

Dead end Clamp with I hook (Insulated)

Piercing Connector (Insulated)

Laying, stringing, sagging, binding and jumpering of ABC (3X150+1X120+1X16) Sq.mm./ (3X120+1X95+1X16) sq mm Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB, XLPE 1X16 Sq.mm. Al. cable for giving connection to Street Light and nuts&bolts off size by the contractor.

Dismentling of old existing A.B. Cable

Carriage of old existing A.B. Cable from work site to store centre

Disconnection & reconnection of consumer service cables

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa Lohd`r vfrfjDr ,y0Vh0 lfdZV cukus ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

LT AB Cable (3X120+1X95+1X16) sq mm

ST Pole 9 mtr long

LT Three Phase Distribution box

LT Cable 1X35 sq mm

Supply of following material/fitting complete in all respect :-

LT Clamps with nuts & bolts

Clamp for LT Three Phase DB Box with Nuts & Bolts

Suspension Clamp with I hook (Insulated)

Dead end Clamp with I hook (Insulated)

Piercing Connector (Insulated)

Laying, stringing, sagging, binding and jumpering of ABC (3X120+1X95+1X16) Sq.mm. Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB, XLPE 1X16 Sq.mm. Al. cable for giving connection to Street Light and nuts&bolts off size by the contractor.

The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Single Pole with fixing of necessary clamps & accessories as per required (if required) . All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Disconnection & reconnection of consumer service cables

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa Lohd`r ,y0Vh0 ykbu ij iksy yxkus@ifjofrZr djus ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

ST Pole 9 mtr long

Earthing Complete

Supply of following material/fitting complete in all respect :-

LT Clamps with nuts & bolts

Shackle insulator 100X115 mm

Red Oxide Paint

Aluminium Paint

Waterproof Danger Board Sticker

The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Single Pole with sticking of waterproof danger board sticker, fixing/refixing of necessary clamps & accessories as per required alongwith resagging of LT Line (if required) . All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Earthing of STP Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.

Dismentling & Carriage of old existing pole from work site to store centre

Disconnection & reconnection of consumer service cables

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa ifjorZd ds vfFkZax ds dk;Z dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Chemical Earthing of Distribution Transformers (Body+Neutral in one complete job)

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa Lohd`r forj.k ifjorZdksa dh {kerk o`f) ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

100 KVA Transformer

250 KVA Transformer

400 KVA Transformer

LT XLPE Al. 3.5X120/150sq mm

LT XLPE Al. 1X240 sq mm

LT cable 1x400 sq mm

Supply of following material/fitting complete in all respect :-

copper z clamp

Almunium lugs of different sizes as per cable requirement

Fabrication, errection, commissioning & Testing of 100/250/400 KVA T/F on Double Pole/Plinth with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help of first class brick & 9" masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely and plastering outer surface as per RESPO norms. Top of the plinth covered with 4" RCC Slab of ratio 1:1.5:3 (Cement, sand & concrete) grouting with 2 Nos. ISMC size 125X65X6 MM (confirming to IS 808:1989) of 2000 mm long for resting. All required materials will be provided by the contractor.

Grill fencing of 11/0.4 KV S/S shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50X50X5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. The work is including painting of fencing as per norms. Work will be done as per RESPO specification.

Dismentling & Carriage of old Transformer from work site to store centre

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa Lohd`r u;s 250@400 ds0oh0,0 forj.k ifjorZdksa dh LFkkiuk ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

400 KVA Transformer

250 KVA Transformer

11 KV XLPE Cable 3X70 sq mm

11 KV C/J Kit 3X70 sq mm

ST Pole 09 mtr long

ST Pole 11 mtr long

MS Top Channel (125x65x2240) mm

MS angle (Dropper) 100X50X2028 mm

ACSR Weasel conductor

11 KV Pin Insulator with pin

11 KV Disc insulaor with fiitings

11 KV Fuse set

11 KV TPMO Set

11 KV V cross arm

11 KV T-Off Channel

Stay complete (Stay rod 16X1800 mm, stay wire 5 kg, stay clamp, bolt & nuts)

Earthing complete

LT Cable 1X240 sq mm

LT Cable 1X400 sq mm

Supply of following material/fitting complete in all respect :-

Shackle insulator

LT Clamps

F Bracket

Holding Clamp for top, dropper channel Fuse set etc with nuts & bolts

Copper Z Calmp

Nuts & bolts of different sizes

Al Lugs

G.I Pipe dia 6 inch

The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Single Pole with fixing of necessary clamps & accessories as per required (if required) . All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Fabrication, errection, commissioning & Testing of 250/400 KVA T/F on Plinth with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help of first class brick & 9" masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely and plastering outer surface as per RESPO norms. Top of the plinth covered with 4" RCC Slab of ratio 1:1.5:3 (Cement, sand & concrete) grouting with 2 Nos. ISMC size 125X65X6 MM (confirming to IS 808:1989) of 2000 mm long for resting. All required materials will be provided by the contractor.

Grill fencing of 11/0.4 KV S/S shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50X50X5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. The work is including painting of fencing as per norms. Work will be done as per RESPO specification.

Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor

Earthing of STP Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.

Chemical Earthing of Distribution Transformers (Body+Neutral in one complete job)

Laying and dressing of under ground 11 KV 3x70 sq mm XLPE Cable by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Erection of 11 KV XLPE Cable 3X70 mm² Jointing Kit with complete work

Making loop & Hoisting of 11 KV XLPE Cable Providing 6'' Dia GI Pipe 3 M Long with complete Work

Laying, stringing, sagging, binding and jumpering of ACSR Dog/Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required.

Erection of TPMO & Fuse set

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work)

fo|qr uxjh; forj.k [k.M&r`rh; xksj[kiqj ds vUrxZr uxj fuxe fo|qr iz.kkyh lqn`<+hdj.k ;kstuk esa 11 ds0oh0 vkj0,e0;w0 dh vkiwfrZ ,oa LFkkiuk dk dk;Z djk;s tkus gsrq dk;Z dk fooj.k %&

Supply Of 11KV,630,21KA Ring Main Unit,3 Way, Outdoor type, 2LBS+1VCB, Manual Operated, Non Extensible ,SF6 Gas Insulated

M/s Anil kumar singh

INDIA SUPPY CORPORATION