PROVN OF KLP ACCN FOR CORPS HQ AT NAGROTA UNDER GE (P) NAGROTA

Amount

Total Amount of Sch 'A' Part - I (Building Works)

Total Amount of Sch 'A' Part - II (Internal Electric Supply Work)

Total Amount of Sch 'A' Part - III (Internal Water Supply Work)

Total Amount of Sch 'A' Part - IV (Plumbing Work)

Total Amount of Sch 'A' Part - V ( Site clearence and earth Work)

Total Amount of Sch 'A' Part - VI (Retaining wall Work)

Total Amount of Sch 'A' Part - VII (Road, Path, Culvert and Hard standing Work)

Total Amount of Sch 'A' Part - VIII (Area Drainage work)

Total Amount of Sch 'A' Part -IX (Sewage disposal Work)

Total Amount of Sch 'A' Part - X (FENCING, GATE AND COMPOUND WALL Work)

Total Amount of Sch 'A' Part - XI (REFRIGERATION AND AIR CONDITIONING/COLD WATER SUPPLY WORK)

Total Amount of Sch 'A' Part - XII (Lightening Protection Work)

Total Amount of Sch 'A' Part - XIII (Hot Water Supply Work)

Total Amount of Sch 'A' Part - XIV (FIRE FIGHTING SYSTEM Work)

Total Amount of Sch 'A' Part - XV (External Electric Supply Work)

Total Amount of Sch 'A' Part - XVI (External Water Supply Work)

Sch 'A' Part - XVII (Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

Supply and fixing complete set of automatic sliding gate of GAZE ISO 9001, GOST R, IRAM, UKAS,TUV quality assured micro computer controlled "SLID -O" double leaf automatic sliding door system with Card for entry and exit including 8 bit micro computer controller, DC 24V brush less motor and with teethed belt all as specified and directed.

Supply and fixing complete set of road boom barrier upto 4mt BEVX4 (Brand Allmatic made in Italy) with Push button 2Nos, Remote 2 Nos, Flashing Lamp 2Nos, Photocell pair 2Nos for entry and exit of Main block all as specified and directed.

Cat eye OS-776 of OSCAR SAFTY SOLUTIONS (100X100X20) complete all as specified as per manufacturer's instructions and directed.

Raod studs, aluminium alloy pressure dia cast OS-786 of OSCAR SAFTY SOLUTIONS (100X100X20) complete all as specified as per manufacturer's instructions and directed.

Road safety convex mirror Model OS-791 dia 100cm complete all as specified as per manufacturer's instructions and directed.

S&F ABS speed breaker of OS-793 of SAFTY SOLUTIONS (75X500X425) complete all as specified as per manufacturer's instructions and directed.

S&F stainless steel round pipe delineartors with reflective tape of OSCAR solution model No OS-802 complete all as specified as per manufacturer's instructions and directed.

Road marking paint, providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermo plastic paint applicator machine fitter with profie shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete all as per direction of Engineer-in-charge and accordance with applicable specification.

Construction of septic tank for 200 users with free board depth 0.45 m including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC M-25 design mix, slab including CI manhole cover (HD) vent pipe and sludge chamber, returning filling in and deposting disposal soil to a distance exc 50 meter, complete all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Construction of septic tank for 100 users with free board depth 0.45 m including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC M-25 design mix, slab including CI manhole cover (HD) vent pipe and sludge chamber, returning filling in and deposting disposal soil to a distance exc 50 meter, complete all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Construction of septic tank for 50 users with free board depth 0.45 m including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC M-25 design mix, slab including CI manhole cover (HD) vent pipe and sludge chamber, returning filling in and deposting disposal soil to a distance exc 50 meter, complete all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Construction of septic tank for 25 users with free board depth 0.45 m including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC M-25 design mix, slab including CI manhole cover (HD) vent pipe and sludge chamber, returning filling in and deposting disposal soil to a distance exc 50 meter, complete all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Construction of septic tank for 10 users with free board depth 0.45 m including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC M-25 design mix, slab including CI manhole cover (HD) vent pipe and sludge chamber, returning filling in and deposting disposal soil to a distance exc 50 meter, complete all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Construction of soakage well of size 3.6 m dia and 6.0 m deep including excavation and earth work in any type of soil, foundation in PCC 1:3:6 wells of honey combed and soil, brick work in CM 1:4, concrete works in M-25, RCC cover slab in M-25 and RR Masonry filling with brick bats, complete, all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Construction of soakage well of size 3.0 m dia and 4.5 m deep including excavation and earth work in any type of soil, foundation in PCC 1:3:6 wells of honey combed and soil, brick work in CM 1:4, concrete works in M-25, RCC cover slab in M-25 and RR Masonry filling with brick bats, complete, all as specified and as shown on drg No. CE/TD/1202/03 sheet No (1/2 & 2/2)

Supply and install hot and cold all weather split AC units indoor /outdoor and suitable size mounting bracket for fixing outdoor unit on Wall / Floor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 TR complete all as specified and directed.

Supply & Install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity 1 KVA.

Supply & Install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity 2 KVA.

Supply & Install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity 5 KVA.

Supply, installation and commissioning and testing Refrigerators double door frost free electric driven single phase 240 volt 50 Hz capacity 310 Ltrs with 5 star rating all as specified and directed.

Supply, installation and commissioning and testing Refrigerators double door frost free electric driven single phase 240 volt 50 Hz capacity 250 Ltrs with 5 star rating all as specified and directed .

Supply & Install desert cooler electric driven operation on single phase,230 volts, 50Hz, Ac supply having nominal air flow capacity of 4000 Cum/Hr , fan size 450mm, complete with submersible water pump, maximum power consumption 250 watt alongwith angle iron supporting bracket made out of 50X50X6mm and making necessary arrangement for fixing of stand in the wall / floor by making holder and using PCC and making good the disturbed surfaces, complete all as specified and directed (Plastic Body/PVC Body).

Supply, installation, testing and commissioning of silent Diesel Engine driven generating set with AMF Panel 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364, control panel with necessary meter and sound proof canopy as per CPCB norms of capacity 250 KVA including following specifications:-

Gen Set a) Frequency 50Hz b) Power Factor 0.8 c) Voltage 415V 3 Phase d) Governing Class (As per ISO 8528 Part V) - G36 cylinder e) Noise Level < 75 dBA f) Fuel tank capacity suitable for 8 hours run at full load g) Electrical Battery Starting Voltage - 24 Volts-DC

Engine a) Rated Output (Prime continous rating as per ISO 8528-1) KW - 228 HP - 310 b) No. of cylinder - 6 c) Cubic capacity - 8.86 Ltrs d) Bore x Stroke - 118 mm x 135 mm e) Rated Speed - 1500 RPM f) Aspiration - TA g) Lube Oil change period - 500 hrs hj) Lube Oil Sump capacity - 27 Ltrs j) Coolant capacity - 31.8 Ltrs k) Liquid cooled engine Alternator a) Insulation Class - Class H b) Ingression Protection - IP23 c) Alternator efficiency (at 100% load) 0.8 PF - 93.6 d) Alternator efficiency (at 75% load) 0.8 PF - 93.9 e) Permissible Voltage Dip at Full Load 0.8 pf lag - <=19% f) Time Permitted to build up rated voltage at rated RPM - <1sec provided engine reach the rated speed g) Short Curcuit ration - 0.45 h) Short circuit withstand time - <3sec j) Overload withstand capacity - 10% overload for one hour once in 12 hours & for 150% for 30 sec

Control Panel Control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- a) Power Command 1.2 Controller b) Aluminium bus bars with suitable capacity with incoming/outgoing terminals c) Indicating lamps for 'Load ON' and 'Set Running' d) Instrument fuses duly wired and ferruled e) MCCB of suitable rating with overload and short circuit protections Power Command 1.1 features The power command control system is a microprocessor based generator set monitoring, metering and control system with LCD display designed to meet the demands of today's engine driven generator sets. a) Intutive operator interface which includes LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps. b) Digital AVR for shunt or PMG excitation with torque matching. c) Digital electronic governing with temperature compensation and smart starting. d) Remote Start-stop e) Engine metering : Oil pressure, coolant temperature, battery voltage, enginje speed f) AC alternator metering :P L-L voltage and L-N voltage, current (1 and 3 phase), Volt-Amperes (phase and total) and frequency g) Engine portection : Low lube oil pressure, high/low coolant temperature, overspeed, battery over/under/weak volts, fail to crank/start. sensor failure, low coolant level sensor.

h) AC alternator protection : over/under voltage, over/under frequency, over current, short circuit and loss of AC sensing j) data logging : engine hours, control hours, engine starts and upto 10 recent fault codes k) Configurable glow plug control l) confuigurable cycle cranking. o) Sleep mode p) Programmable I/Os (4 inputs and 2 outputs), expandable with AUX101/102 modules q) Modbus interface (RS485 RTU) r) InPower compatible (PC based service tool) s) Certifications - meets the requirement of relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards Silencer Hospital grade silencer suitably optimised to meet stringent noise emission standards laid down by MoEF/CPCB Mounting Arrangement a) engine and alternator are mounted on a common MS fabricated base frame with AVM pads. b) Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning.

Acoustic enclosure a) Specially designed to meet stringent MoEF/CPCB norma of 75 dBA @ 1 mtr at 75% load under free field conditions. b) The acoustic enclosure is made of CRCA sheets in Munsel green shade and s structural/sheet metal base frame painted in black. c) High quality noise absorbent and fire-retardent grade acoustic insulation material (Rockwool) complying to IS 8183 d) base lifting for easy handling at customer site e) Designed to have optimum serviceability f) Air inlet louvers specially designed to opereate at rated load g) Made on special purpose CNC machines for consistency in quality and workmanship h) 11 tank pretreatment process and UV resistant powder coating of all parts to withstand extreme environment j) Use of special hardware for longer life k) Flush styling - no protections l) Fluid drains for lube oil and fuel m) Fuel filling arrangement inside the enclosures.

AMF Panel Standard Control Panel for DG Set shall be made of fabricated sheet cubical type with front hinged cover, with inter copper wiring & of suitable size complete with microprocessor based controller with following features:- (a) State of art compact Microprocessor based fully configurable technology. (b) Integration of all engine and alternator parameters. (c) For ease of viewing, high performance graphical LCD and prominent display. (d) Event logging history for easy of maintenance/service. (e) Capability of withtstanding wide range of operating temp. (f) Individual tough buttons for manual, auto and test mode. (g) LED indications for genset status and alarms. (h) Battery conditions monitoring. (j) Statistical cumulative counters like No. of starts, engine run hrs, KWH (k) Setting provision for different parameters on front panel. (l) Two Nos Microprocessor adjustable based MCCB 4 Pole, not less than current rating cap 315 Amp, 50 KA breaking capacity all as per manufacturer design. (m) Two Nos Contactors 4 Pole not less than current rating 315 Amp for main & DG all as per manufacturer design. (n) Copper bus bars of 500 Amp capacity provided with termination. Note:-Staging for installation of DG set 250 KVA capacity shall be measured and paid for separately.

Supply, installation, testing and commissioning of silent Diesel Engine driven generating set with AMF Panel 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364, control panel with necessary meter and sound proof canopy as per CPCB norms of capacity 600 KVA including following specifications:-

Gen Set a) Frequency 50 Hz b) Power Factor 0.8 c) Voltage 415V 3 Phase d) Governing Class (As per ISO 8528 Part V) - G3 e) Noise Level < 75 dBA h) Fuel tank capacity suitable for 8 hours run at full load i) Electrical Battery Starting Voltage - 24 Volts-DC

Engine a) Rated Output (Prime continous rating as per ISO 3046) KW - 532 HP - 723 b) No. of cylinder - 12 c) Cubic capacity - 23.88 Ltrs d) Bore x Stroke - 130 mm x 150 mm e) Rated Speed - 1500 RPM f) Aspiration - TA g) Lube Oil change period - 500 hrs h) Lube Oil Sump capacity -537 Ltrs i) Coolant capacity with radiator- 145 Ltrs j) Liquid cooled engine Alternator a) Insulation Class - Class H b) Ingression Protection - IP23 c) Alternator efficiency (at 100% load) 0.8 PF - 95 d) Alternator efficiency (at 75% load) 0.8 PF - 95.2 e) Permissible Voltage Dip at Full Load 0.8 pf lag - <=20% f) Time Permitted to build up rated voltage at rated RPM - <5sec provided engine reach the rated speed g) Short circuit withstand time - 3 times rated current for "10 sec" h) Overload withstand capacity - 10% overload for one hour once in 12 hours

Control Panel Control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and lomg lasting finish. The control panel consists of the following parts:- a) Power Command 1.2 Controller b) Aluminium bus bars with suitable capacity with incoming/outgoing terminals c) Indicating lamps for 'Load ON' and 'Set Running' d) Instrument fuses duly wired and ferruled e) MCCB of suitable rating with overload and short circuiot protections Power Command 1.1 features The power command control system is a microprocessor based generator set monitoring, metering and control system with LCD display designed to meet the demands of today's engine driven generator sets. a) Intutive operator interface which includes LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps. b) Digital AVR for shunt or PMG excitation with torque matching. c) Digital electronic governing with temperature compensation and smart starting. d) Remote Start-stop e) Engine metering : Oil pressure, coolant temperature, battery voltage, enginje speed f) AC alternator metering :P L-L voltage and L-N voltage, current (1 and 3 phase), Volt-Amperes (phase and total) and frequency g) Engine portection : Low lube oil pressure, high/low coolant temperature, overspeed, battery over/under/weak volts, fail to crank/start. sensor failure, low coolant level sensor.

h) AC alternator protection : over/under voltage, over/under frequency, over current, short circuit and loss of AC sensing j) data logging : engine hours, control hours, engine starts and upto 10 recent fault codes k) Configurable glow plug control l) confuigurable cycle cranking. o) Sleep mode p) Programmable I/Os (4 inputs and 2 outputs), expandable with AUX101/102 modules q) Modbus interface (RS485 RTU) r) InPower compatible (PC based service tool) s) Certifications - meets the requirement of relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards Silencer Hospital grade silencer suitably optimised to meet stringent noise emission standards laid down by MoEF/CPCB Mounting Arrangement a) engine and alternator are mounted on a common MS fabricated base frame with AVM pads. b) Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning.

Acoustic enclosure a) Specially designed to meet stringent MoEF/CPCB norma of 75 dBA @ 1 mtr at 75% load under free field conditions. b) The acoustic enclosure is made of CRCA sheets in Munsel green shade and s structural/sheet metal base frame painted in black. c) High quality noise absorbent and fire-retardent grade acoustic insulation material (Rockwool) complying to IS 8183 d) base lifting for easy handling at customer site e) Designed to have optimum serviceability f) Air inlet louvers specially designed to opereate at rated load g) Made on special purpose CNC machines for consistency in quality and workmanship h) 11 tank pretreatment process and UV resistant powder coating of all parts to withstand extreme environment j) Use of special hardware for longer life k) Flush styling - no protections l) Fluid drains for lube oil and fuel m) Fuel filling arrangement inside the enclosures.

AMF Panel Standard Control Panel for DG Set shall be made of fabricated sheet cubical type with front hinged cover, with inter copper wiring & of suitable size complete with microprocessor based controller with following features:- (a) State of art compact Microprocessor based fully configurable technology. (b) Integration of all engine and alternator parameters. (c) For ease of viewing, high performance graphical LCD and prominent display. (d) Event logging history for easy of maintenance/service. (e) Capability of withtstanding wide range of operating temp. (f) Individual tough buttons for manual, auto and test mode. (g) LED indications for genset status and alarms. (h) Battery conditions monitoring. (j) Statistical cumulative counters like No. of starts, engine run hrs, KWH (k) Setting provision for different parameters on front panel. (l) Two Nos Microprocessor adjustable based MCCB 4 Pole, not less than current rating cap 850 Amp, 50 KA breaking capacity all as per manufacturer design. (m) Two Nos Contactors 4 Pole not less than current rating 850 Amp for main & DG all as per manufacturer design. (n) Copper bus bars of 1000 Amp capacity provided with termination. Note:- Staging for installation of DG set 600 KVA capacity shall be measured and paid for separately.

Staging for installation of one DG set of capacity 250 KVA complete with all materials complete all as specified and as directed by Engr-in-charge as per manufacturer's instructions.

Staging for installation of one DG set of capacity 600 KVA complete with all materials complete all as specified and as directed by Engr-in-charge as per manufacturer's instructions.

(a) Stops and Openings : 5 Stops / 5 openings on the same side. (b) The integral dimension of the lift car shall be of suitable size for the specified load and as per IS 14665-2000 (Part-3, Sec-1) as amended to date. (c) The inside car measurement shall be based on lift well dimensions shown on drawing forming part of the contract.

Each lift shall be complete with and including following accessories / fittings:- (i) Double button with 5 segment digital LED display at all floors. (ii) Car operating panel with micro stroke push button with 5 segment digital car position indicator, car direction indicator. (iii) The safety controls and indicator shall be as per standard practice and based on infra red sensors. (iv) The testing of lift with 25 % excess load shall be conducted as per para 25 of IS 14665-2000 (Part-3, Sec-1) as amended to date. The arrangement for testing load for testing and instrument required shall be arranged by contractor. (v) Fireman’s switch provided at main lobby. (vi) Battery operated alarm bell and emergency light with battery. (vii) Lift announcer. (viii) Car chime (ix) Provision of cross flow rectangular (low noise/mildair flow) fan – 02 Nos of approved make. (x) S & F Decorative LED spot light (LS3) - 04 Nos. (xi) Provision of emergency intercom system (Car machine room – control room). (xii) Overload function, constant indication/ buzzer. (xiii) 5/15 A power socket & light point at every floor level in the hoist way. (xiv) MS Ladder (xv) Three Phase supply & earthing from machine room to all equipment. (xvi) The words "FIRE LIFT" and "IN CASE OF FIRE ONLY FIREMAN SHALL OPERATE THE FIRE LIFT" shall be pasted in bold letters on PVC sheets at all floor levels. (xvii) Landing Jamb, (xviii) Hall station will be finished with 19mm thick granite of adequate size.

Optional Features Required (i) Multi beam full length criss crossing each other infrared door sensor (minimum of 154) (ii) Emergency landing device ELD (ARD) (iii) Extra cores in travelling cable for customer smoke detectors. Note:- No extra cement payment will be permissible for any minor changes necessary for smooth functioning and safety of lift.

Supply and fixing TPN 240 V AC, 40 Amp MCB 10KA (For TPN Dis Board in Lift machine room)

Remotely controlable access control cum locking system with CCTV cameras (1/3 CCD 3.6 mm doom IR night vision colour camera, 32 Channel stand alone Digital Video Recorder with HDD, SMPS etc) for various important rooms of Adm block to be provided. In addition to provision of CCTV surveillance with central monitoring system for entry/exit points of Corps HQ complex (CCD 6 mm IR night vision colour camera with weather proof camera with high regulation hardware with mounts alongwith 16 Channel stand alone Digital Video Recorder (DVR) with H264 hard wear compression with USB mouse & LAN ports, HDD, SMPS unit, cable etc) including necessary conduite and all acessories complete all as specified and directed by Engineer -in- Charge.

(i) 1/3" CCD 3.6 mm doom IR night vision colour camera (8 Conf Halls @ 4 Nos each+2 Nos GOC Sectt + 2 Nos each MSS, IIT & MIS Cell) Make - CP Plus/Dahua

(ii) 1/3" CCD 6 mm IR night vision colour camera with sony supper head with 90 angle with 24 IRC light with high weather proof camera with high resolution with mounts (for main entry & exist gate 02 Nos) Make - CP Plus/Dahua

(iii) 32 Channel stand alone Digital Video Recorder with H-264 Hard wear compression with USB mouse with D1 resolution Make - CP Plus/Dahua

(iv) 16 Channel stand alone Digital Video Recorder with H-264 Hard wear compression with USB mouse with D1 resolution Make - CP Plus/Dahua

(v) 1 TB HDD (Main Gate & Bldg) Make - WD/TOSHIBA/SEAGATE

(vi) SMPS unit 5 Amp (Main Gate & Bldg) Make - Secureye/Tentronix

(vii) 2+1 Coaxial RG 59U Cable (100 m roll) (Main Gate & Bldg), wiring in concealed conduit including suitable size conduit and fittings.

(viii) 32" security grade widescreen LED monitor with true HD resolution 1366 x 768p, high brightness 400cd/m2, wide viewing angle, split zoom, panel stability, RGB & 2 HDMI inputs, 2 USB playback, true colour and eliminates distortion at wide angles. Make - LG/Samsung/RelianceConnect

(ix) Remotely Access cum Control system

Supply & fixing orifice plate of 6 mm thick up to 200 mm outer dia SS steel with orifice (internal dia) of required size in between flange & landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg/SqCm complete as per specific action as required.

Supply & fixing of fire Man's axe with heavy insulated rubber as per standards confirming to IS 926 for Sub Head -I ( Pump, Wet Risers & Hydrants ), complete all a specified and directed.

Gun metal/ CI foot valve spring operated type, tested to 2 kg/ sqcm for Fire fighting Sub Head -I ( Pump, Wet Risers & Hydrants ) of following sizes :-

(a) 200 mm bore

(b) 150 mm bore

(c) 100 mm bore

Fabrication & installation of following size of perforated MS tray including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and including painting etc as required for Fire fighting Sub Head - II ( Motor Control Panel, Cable Tray and Earthing) :-

(a) 300 mm width x 50 mm depth x 1.6 mm thickness, length 2 RM

(b) 150 mm width x 50 mm depth x 1.6 mm thickness, length 2 RM

Supply,erection,testing and commissioning of SS flexible pipe of suitable dia and length required for connection of sprinklers, Sub Head-III (Sprinklers system), complete all as specified and directed.

Graphic display software with PC for the same shall be atleast of P-IV capacity and specified make only for Fire Fighting ,Sub Head-IV (fire alarm), complete all as specified and directed.

Supply & fixing power supply unit with 12 V, 7 AH battery with charger circuit for sounders for Fire Fighting ,Sub Head-IV (fire alarm), complete all as specified and directed.

Supply, installation, testing & commissioning of fire exit sign & internal hydrant sign (illuminated) made from etched sheet with LED illumination and all electrical accessories incl battery and battery charger etc as required for Fire Fighting ,Sub Head-IV (fire alarm) , complete as per specifications :-

(a) Single Side

(b) Double Side

Supply, assembling, erection, testing and commissioning of gas detector sensitron for Fire Fighting ,Sub Head-IV (fire alarm), complete all as specified and directed.

Supply, erection, testing and commissioning of gas detector panel for Fire Fighting ,Sub Head-IV (fire alarm), complete all as specified and directed.

Fire Fighting, Sub Head-V (FM 200 GASE SUPPRESSION SYSTEM) Supply installed , testing , commissioning of FM200 gas suppression System including all accessories and fittings, assumming height of 3 metre which required for computer room, area 120 sqm , library room ,area 80 sqm , library cum muesem, area140 sqm and telephone exchange room,area 44 sqm complete with all accessories etc all as required, complete all as specified and directed.

Cable root marker/indicater for rooting of HT/LT UG cables including PCC 1:3:6 of size .3x.3x.3 mtr complete all as specified and as directed by Engr-in-charge.

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 500/400 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-6/4C) or equivalent in other approved make..

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 240 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-5/4C) or equivalent in other approved make.

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-4/4C) or equivalent in other approved make.

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-3/4C) or equivalent in other approved make.

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-2/4C) or equivalent in other approved make.

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 4.0 core XLPE armoured aluminium conductor cable of size 25 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-2/4C) or equivalent in other approved make.

Cable jointing kit for 1100 Volts (Earthed) grade cable for indoor/outdoor termination Heat shrinkable type joint complete with jointing meterial and accessories suitable for 4.0 core XLPE armoured aluminium conductor cable of size 35 sqmm complete all as specified and as directed by Engr-in-charge. Make - 3M Electricals Markets Division, Cat Part No. MHI/OX1.1KV(HESL-2/4C) or equivalent in other approved make.

Construction of platform for installation of transformer of size 3mx2.5mx1.2m including necessary earth work, fencing and gate complete all as shown on drg No CEUZ/TD-1516/15sheet (1/1) complete all as specified and as directed by Engr-in-charge.

Digital Time switches including all fittings for timer switch programmable every 1 min , with backup of 6 years, 28 memory locations , current capacity 16 A , weekly program, with 1 changeover (1 CO), Total 28 programs complete all as specified and as directed by Engr-in-charge. Make - IndoAsian or equivalent, Model Name - DIN type daily/weekly with 1 CO, Cat Ref.TDA43110, HSN Code:9107

LED Flood Light 120 Watt, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 complete all as specified and as directed by Engr-in-charge. Cat Part No. JETAIRISFLS120WLED757APWBLTG Make Havells or equivalent in other approved make. (Note - for 02 Nos Guard Post and 03 Nos Watch Tower)

Supply and fix Energy Efficient LED 60 W Street light luminaire including all necessary arrangement for fixing on pole, made up of epoxy coated pressure dia cast housing conforming to IP 66 for optical compartment and control gear compartment.The optical compartment shall be covered with heat resistant toughened glass for safety. LED street light should be provided with non yellowing modular secondary lens optics. The driver used should be specically designed to have built - in - surge voltage, open / short circuit protections. Built - in - surge protection upto 4 KV and external surge protection upto 10KV provided for additional safety. Side entry mounted for 40mm and above OD pipe bracket. The LED shall be tested with LM80-08 standard. The LEDs used in streat light shall have CCT of >5700 K with CRI of > 70. The LED street light shall be integral type. The input voltage range shall be 140V to 270V. The LEd driver shall be of isolated type with constant current constant voltage topology to ensure optimum driving of LEDs. The LED street light shall have luminous of > 90/watt and power factor more than 0.9 with THD less than 10% complete all as specified and directed. (Note - For street lights) Make:- Cromption Cat Part No. LST -60 -CDL - M, Philips Cat Part No. BRP409 LED 060 CW HE NR PC S1PSU GR, Wipro Cat Part No. LR02-671- XXX-57 - G2, Havells Cat Part No. ENDURAPEARLNEOSL60WLED 757PASYTOPC, Bajaj Cat Part No. ENXT P 72L WH CR PC SD or Equivalent from the makes given in Particular specification"

Street light bracket made out of GI pipe 40mm dia duly bend by 120 degree by means of cutting, welding including necessary clamps made out of 50x6 mm flat iron, nuts, bolt, washers etc. including painting one coat of enamel paint overa coat of red oxide suitable for street light pole complete all as specified and directed by Engr-in-charge. (for street lights)

Supply & fixing Post top light 35 Watt , new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source.Make Havells Cat Part No. CORALPT35WLED830PSYMTOPC or equivalent in other approved make.

Supply, laying & testing PVC insulated, FR PVC round sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade. Make - Havells, Cat Ref - WHMFDSKB21X5 or equivalent in other approved make. (for Street light connection from Junction Box, per pole 5 RM x 47 poles)

Thermoplastic junction box of size 200x160x98 mm, front door openable with in and including connecting terminals with copper links mounting clamps, nuts, bolts and washers etc set of four including provision for fixing of MCB SP6 to 32 Amp - 01 Nos inside the junction box (MCB SP shall be measured and paid for separately) complete all as specified and directed by Engr-in-charge. Make:- Hensel,Sintex or equivalent in other approved make.

Thermoplastic junction box of size 167x125x82 mm, front door openable with in and including connecting terminals with copper links mounting clamps, nuts, bolts and washers etc set of four including provision for fixing of MCB SP6 to 32 Amp - 01 Nos inside the junction box (MCB SP shall be measured and paid for separately) complete all as specified and directed by Engr-in-charge. Make:- Hensel, Sintex or equivalent in other approved make

Supply and fixing MCB, SP of rating 6 to 32 Amp including necessary connection & testing complete all as specified and as directed by Engr-in-charge Make Havells Cat Part No. DHMGCSPF006-032 or equivalent in other approved make.

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (Main Panel - 1) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 1500 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel - 3, Adm Bldg Left Wing) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 500 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel- 4, Adm Bldg Right Wing) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 500 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel - 5, Offrs Mess) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 400 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel - 6, Single Living Offrs Accn) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 300 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (Main Panel - 2) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 1000 amps

Supplying, installation, commissioning and testing of Lt switch gear control panel board 440 volt AC 3 phase 4 wire for out door installation "KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e CRCA sheet 3.15 mm thick (14 SWG), angle / channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard, with phosphatised powder coating painting externally and internally to protect against corrosion: The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories: - (LT Panel - 7, Fire Fighting Building) (a) Bus bar chamber with electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating 600 amps

Design, fabrication,Supply , errect, testing and commissioning of 16 meter high mast post of steel in two sections suitable for 55 m/sec wind speed as per IS:875 (Part-II) totally hot dipped galvanized as per IS 355 grade as per BS-EN 10025 with elevating/lowering platform type of thickness 3 mm at bottom & top of high mast pole and diameter at top not less than 150 mm and bottom not less than 360 mm & 20 side polygon standard for ganvanization as per BS EN ISO 1461 including opening at door at base of size with 1050 x 225 mm base plate of not less than 560 mm & thickness 25 mm suitable for mounting 8 Nos floodlight X luminaries in symmetrical arrangement including 450 mm dia luminaire carriage made of 40 NB ERW class B MS pipe welded in 2 sections and electrically operated raising lowering system comprising double drum winch, two continuous 5mm dia steel wire rope made of AISI 304,7/19 of breaking capacity 1450 KG, trailing cable of size 3 core 2.5 Sqmm, connector, integral power tool motor of capacity not less than 0.75 HP single speed one number, manual handle, junction box, lighting finial, lantern carriage, top pulley arrangement complete including design and construction of shallow foundation with RCC (M-20) grade concrete from the high mast considering the safe soil bearing capacity at site as 10T per Sqm at 2Mtr depth with all material and labour , foundation bolt manufactured from special steel along with nuts, washer, anchor plate and common template, power cables from Panel to top of High Mast cg mounting clamps and bolts, including erection and commissioning including earthing as per BIS and modern engineering practices including providing and fixing of lightening arrestor and LED type single dome aviation obstruction light complete all as specified. Make of high mast : BAJAJ ELECTRICALS LIMITED CROMPTON GREAVES, WIPRO , C & S ELECTRIC or equivalent from the makes given in particular specifications." The scope of work includes the following:- (a) Supply, installing , testing and commissioning, factory made LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars 200 Amps ration installed on porcelain insulators. The panel shall be dust and vermin proof IP 65 class protection and made of 3.15mm CRCA MS sheet and 40X40X6mm thick angle iron frame work, extermally power coated finish over one coat of red oxide primer on outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provision of 65mm Godrej (Freedom) lock with 2 keys, internal wiring 2.5 Sqmm with PVC insulated, solid copper conductor, FRLS cables, I(S -694 marked of adequate size. (i) MCCBs TPN, 415 Volts grade, 63 Amps rating and 16 KA rupturing capacity: 01 No for incoming. (ii) Indicating lamps:- 01 set of three. (iii) digital Timer switch with suitable size MCB & Contractor for automatic ON/OFF switching - 01 No. (iv) Luminaire carriage raising/lowering Push Button.

Fabrication & installation of following size of perforated MS tray including horizontal and vertical bends, reducers, tees, cross members,nuts & bolts and other accessories as required and duly suspended from the ceiling with MS suspenders and including painting etc as per IS:277 with 120 GSM and with all standard tests required :-

(a) 500 mm width x 100 mm depth, thickness 1.6mm and length 5 metres

(b) 150 mm width x 75 mm depth, thickness 1.6mm and length 5 metres

Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete all as specified and directed by Engr-in-Charge. Make Bajaj, Cat Part No. BGAV302LED or equivalent in other approved make(for Adm Bldg).

Cutting of existing undergroung GI/CI water main pipe line of 150/100/80 mm dia , flanges on both the ends and inserting CI flange Tee of suitable and including nuts, bolts, washers and packing material (Rubber sheet), jointing material including necessary earth work, complete all as specified and directed by Engr-in-Charge.

Cutting of existing undergroung CI water main pipe line of 300 mm dia , flanges on both the ends and inserting CI flange Tee of size 300x300x(100/50) mm and CI collar including nuts, bolts, washers and packing material (Rubber sheet), jointing material including necessary earth work, complete all as specified and directed by Engr-in-Charge.

Brick masonry chamber (Valve Pit) for opening and closing valve of internal dimensions (900mm x 900mm x 900mm) build in CM 1:6 including fixing MS sheet cover 3.15 mm thick over angle iron frame of size 50x50x6mm with laying and locking arrangement and 15mm thick cement plaster in CM 1:4 internally with two coat of synthetic enamel paint over one coat of red oxide primer including necessary excavation and earth work in any type of soil/strata, complete, all as specified.

Brick masonry chamber (Valve Pit) for opening and closing valve of internal dimensions (1200mm x1200mm x 1200mm) build in CM 1:6 including fixing MS sheet cover 5 mm thick over angle iron frame of size 40x40x4mm with laying and locking arrangement and 15mm thick cement plaster in CM 1:4 internally with two coat of synthetic enamel paint over one coat of red oxide primer including necessary excavation and earth work in any type of soil/strata , complete, all as specified.

S&F for Centrifugal Monoblock pump set of minimum capacity 5 HP suitable for 415 Volt three phase system having capacity, 350 LPM at 35 mtr head complete all as specified and directed.

Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 8 module complete all as specified.

Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 12 module complete all as specified.

Modular blanking plates 1 module complete all as specified.

Flame proof heavy duty exhaust of 450 mm sweep, made out of dynamically balanced hub of Aluminum Alloy LM-6, having air discharge capacity of 1250CFM, coupled with flameproof motor of 0. 25HP, Single phase, 1440 RPM, Noise Level <78 db, duly, IP66 approved and certified by CIMFR complete all as specified.

Sheet metal enclosure for DB's , MCB DB VTPN 4 way double door including 125A MCCB 10 KA, 415 V as incomer IP 54 protection and isolated neutral and Earth bus bar complete all as specified.

Sheet metal enclosure for DB's , MCB DB VTPN 8 way double door including 125A MCCB 10 KA, 415 V as incomer IP 54 protection and isolated neutral and Earth bus bar complete all as specified.

Sheet metal enclosure for DB's , MCB DB SPN 6 way double door complete all as specified.

MCB single pole 230 Volts of capacity 63 A complete all as specified.

LED Bulb 9 watt B22 CDL 3 star lamp, 230V, 6500K and including taking down light fittings of any type and any size from wall/ceiling complete all as specified and directed by Engineer in charge

Wall Mixer (Exposed Adjustable legs) with telephone shower arrangement & Crutch complete all as specified and directed. Make:- Jaguar ,Cat No-SOL-6271 or equivalent in other approved make.

15mm bore two way stop valve/angle valve,chromiun plated cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union,complete all as specified and directed. Make Jaguar, Product Code-MQT-ESS-526AFKN or equivalent in other approved make.

Health Faucet 15mm bore premium chrome 2 in 1 (with tube & huck) complete all as specified and directed. Make:- Pearl ,Cat No-HF-131 or equivalent in other approved make.

Supply and fix integral sleek extruded batten aluminium / CRCA channel fitting with LED 20/18 watt polycarbonate complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size of 230V, 50Hz, 1800 lumens, IP-20 and 5KV surge protection complete all as specified and directed by Engineer - in - Charge. Make:- Bajaj Cat Part No. BLRB-DB 118(Batten) & BLRB 18W CWC (Tube), Cromption Cat Part No. DMLN1LT8-16(Batten) & LTT8-20(Tube), Havells Cat Part No. REGALBATTEN5UPTO1X18WDSBSWH(Batten) and CRYSTAL1213T8DSTL18WLED865SGLASS(Tube) or equivalent from the makes given in the Particular Specification.

Supply and fix batten integrated LED light fitting mirror type with high output diffuser 2feet, 9/10watt 220WAC frequency 50 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less than 0.9 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer - in - Charge. Make:- Surya Cat Part No. SLEBT10 or equivalent from the makes given in the Particular Specification.

Supply and fix Energy Efficient LED 60 W building security light luminaire including all necessary arrangement for fixing on pole, made up of epoxy coated pressure dia cast housing conforming to IP 66 for optical compartment and control gear compartment. The optical compartment shall be covered with heat resistant toughened glass for safety. LED street light should be provided with non yellowing modular secondary lens optics. The driver used should be specically designed to have built - in - surge voltage, open / short circuit protections. Built - in - surge protection upto 4 KV and external surge protection upto 10KV provided for additional safety. Side entry mounted for 40mm and above OD pipe bracket. The LED shall be tested with LM80-08 standard. The LEDs used in street light shall have CCT of >5700 K with CRI of > 70. The LED street light shall be integral type. The input voltage range shall be 140V to 270V. The LEd driver shall be of isolated type with constant current constant voltage topology to ensure optimum driving of LEDs. The LED street light shall have luminous of > 90/watt and power factor more than 0.9 with THD less than 10% and including suitable size GI bracket for fixing light on wall with nut bolt washers etc. complete all as specified and directed. Make:- Cromption Cat Part No. LST -60 -CDL - M, Philips Cat Part No. BRP409 LED 060 CW HE NR PC S1PSU GR, Wipro Cat Part No. LR02-671- XXX-57 - G2, Havells Cat Part No. ENDURAPEARLNEOSL60WLED 757PASYTOPC, Bajaj Cat Part No. ENXT P 72L WH CR PC SD or Equivalent from the makes given in Particular specification"

Material and labour for white powder coated CRCA housing with LEDs 36W, 230V, 50Hz recess mounting LED2 feet X 2 feet luminaries, Swam less front flame with flat white high transmission acrylic cover. The LED shall be tested with LM80-08 standard and have lumen efficiency 100 lumens/watt, CCT of 5700 K, CRI 80, PF>0.95 with THD <10% complete with all acessories including connecting up with twin core twisted flexible copper conductor cable of suitable size and complete all as specified and directed by Engineer - in - Charge. Make:- Bajaj Cat Part No. BZRSQL 36W GZ WH, Wipro Cat Part No. CRCO10R038HP57GL, Crompton Greaves Cat Part No. CCR - 127 -36 -57 - SL - NWH, Havells Cat Part No. STRATO2X2PLR36WLED857MOD, C&S Cat PARt No. LTCRRB36WLED or equivalent from the makes given in the Particular Specification.

Material and labour for fabrication of suitable size/shape support/Hangers as directed at site for MS heavy duty fire fighting pipes of any size at any locations from ground/hangig in ceiling or fixed in wall by using MS angle iron/channels/MS flat iron/MS rods etc. of suitable size including suitable nuts, bolts, washers etc. and necessary welding work complete all as specified and directed. Note:- MS support/Hangers, anti - vibration pad shall be capable for with standing maximum working pressure of Pipes and acting loads from any condition.

Supply and installation of Modular mounting storages overhead cabinet as per approved design using 18/19mm thick prelaminated particle board middle wall at max spacing 600mm C/C overall height not less than 900mm and depth 450mm with openble 18/19mm thick prelaminated shutters (or 4mm thick glass sliding shutters) fixed to the storage with the help of auto close hinges 110 degree, including machine pressed PVC edge beading 2mm thick in matching colour, zinc alloy die- cast chrome finish cam lock/ desk drawer locks for each shutter, brushed SS handle on each shutter etc, fixed on wall as directed by manufacturer complete all as specified and directed by Engr-in-Charge. Note:- All joints of board to be made with help of CRCA cleat. For measurement, only front of storage will be measured complete all as specified and directed. Make:- Empire safe Co/Royar Kaos/Durian or equivalent.

supply and fixed of cubicle /work station having 45mm thick modular partition workstation size of 'L' shape (1200mm x 600mm x 900mm height & 900mm x 600mm x 900mm height) made out of tiles. Base frame work of welded power coated CRCA steel (MS grade D formed into 1.5mm C channels). Cover of the frames will be powder coated 1mm thick CRCA metal sheets. The partion will be made by two 6mm thick MDF with 0.6mm thick decorative laminate on top as approved for fixing on CRCA frame work. Workstation having glass partition on top of the table and Pin board face on inside above worktop. Trims and caps will be made of aluminium alloy (Grade He- 9 63400) of 1.2 mm thickness, powder coated to the desired colour/finish incl three drawer mobile pedestal (450mm x 450mm x 715mm) using 18mm thick prelaminated particle boards with same texture as workstation. Drawers shall have channel arrangement for smooth operation, with best quality stainless steel handle in brush finish and multi Drawer Lock Zinc alloydie - cast chrome finish with two keys, with powder coated CRCA Keyboard tray and powder coated CRCA CPU trolley complete all as specified and directed. Make:- Cat No ESC/WS/009 of Empire Safe Co/Royal Kaos/Durian or Equivalent.

DES RAJ NAGPAL CONTRACTORS PVT.LTD

Saru Enterprises Pvt Ltd

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

Rabina Enterprises Pvt Ltd

Agarwal Jagdish Construction Company Pvt. Ltd.

Varindera Constructions Limited

M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd.

ENGINEER CONSTRUCTION PVT. LTD.